• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.229-234
• /
• 2001

In order to care about preserving the environment for future generations, each country has been required to make the laws of the environment. So car manufacturers must design, manufacture and sell cars and trucks that meet customer's need and must do this while meeting the needs of the environment. In this research we have developed product structure and configuration management system that treats electronic catalogs for recycling of automobile parts. This research focused on two system. One is XML-based electronic catalog that give the information about recycling of automobile parts. The other is product structure and configuration management system based on electronic catalog.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.139-144
• /
• 2012

In the automobile industry, the various efforts to lower their industrial cost and enhance fuel efficiency have been made through process improvement or weight saving of automobile parts. Gear is one of significant parts of transmission, which is made by cast iron or alloy steel. It is expensive due to complex processing, inferior materials and large machining allowance. In this study, alternative gear cars oil which is based on fluid applications materials is produced by reducing surface induction hardening and carburizing hardened in production. And then, wear characteristic and mechanical properties such as hardness of the sintered alloy which is used as a substitute for small machining allowance is investigated.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.55-66
• /
• 2015

To satisfy safety regulations of Economic Commission for Europe (ECE), the surface regions of automobile parts must have a sufficient degree of roundness if there is any chance that they could contact a sphere of 50.0 mm radius (exterior parts) or 82.5 mm radius (interior parts). In this paper, a new offset-based method is developed to automatically detect the possible sphere-contacting shape of such parts. A polyhedral model that precisely approximates the part shape is given as input, and the offset shape of the model is obtained as the Boolean union of the expanded shapes of all surface triangles. We adopt a triple-dexel representation of the 3D model to enable stable and precise Boolean union computations. To accelerate the dexel operations in these Boolean computations, a new parallel processing method with a pseudo-list structure and axis-aligned bounding box is developed. The possible sphere-contacting shape of the part surface is then extracted from the offset shape as a set of points or a set of polygons.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.46-53
• /
• 2002

The expolitation of substitute material and new manufacturing technology of the automobile body panel for next generation cars have been steadily professed by advanced automobile companies. High strength steel of TRIP (Transformation of Induced Plasticity) type is developed in response to demands about crash safety and high strength of automobile. In this study, basic technologies can fix up problems occurring on the mass production and applied to the other forming methods will be prepared through rasping a property of TRIP material.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.260-263
• /
• 2004

Since Outerrace is one of the components of driving shaft for power train of automobile and transmits high torque, high strength and high toughness are necessary so forging process is adopted to manufacture such parts. Therefore, in order to improve strength and toughness, heat treatment is accomplished after plastic deformation(forging). Because Each component of driving shaft is mounted to automobile after a series of forging, machining and heat treatment, in order to evaluate mechanical properties of such components in use, plastic deformation and heat treatment must be considered. So, in this paper, tensile tests are performed with tensile specimens which have passed through a series of upsetting, machining and heat treatment to evaluate mechanical properties of such components.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.231-244
• /
• 2017

Objective: This study aims to understand the occupational injury characteristics of the workers in the motor vehicle parts (automobile parts) manufacturing industry and to present basic guidelines on accident prevention through accident analysis. Background: There occur many occupational injuries in the motor vehicle parts manufacturing industry. But there were few researches for the occupational injuries of the workers in the motor vehicle parts manufacturing industry. Method: This study analyzed the data of occupational injuries of 1,609 workers in the motor vehicle parts manufacturing industry in 2015. The accident characteristics were analyzed by dividing them into worker related factors and accident related factors. Results: Among the occupational injuries of the workers in the motor vehicle parts manufacturing industry, 80.6% of the victims were males, 64.0% were older than 40. 57.8% of the victims were employed by the companies with less than 50 workers. In addition, there was a difference in accident characteristics according to age, work experience, employment type, events or exposures, accident time of the day, agents, natures of injuries and illnesses, injured organs and injured body part. Conclusion: It is important to prevent equipment/machinery accidents. For this purpose, more efforts should be made to establish safety measures faithful to the basics of safety devices and safety work procedures. It is also suggested that prevention of disasters should be intensively carried out for workplaces with less than 50 employees and middle-aged and elderly people. Application: The result can be used to present guidelines for preventative measures for the workers in the motor vehicle parts manufacturing industry including safety education/training.

• Transactions of Materials Processing
• /
• v.32 no.6
• /
• pp.335-343
• /
• 2023

Spur Gear parts for automobile actuators using existing former forging technology were produced in a total of three processes on a former forging machine. However, in order to improve cost increase due to frequent mold breakage, Spur Gear parts were designed and manufactured in the cold forging process after forming the preform through former forging. In other words, in the existing former forging mold, product seating defects occurred due to horizontal movement, resulting in many product defects and mold damage, so there was an urgent need to improve mold life and product defects. In order to improve this, we tried to improve the mold life by improving the existing 3 former forging processes to a former forging process and 2 cold forging processes. Therefore, We developed Spur Gear parts for automobile actuators were developed by applying precision cold forging technology through a former forging process and 2 cold forging processes to improve mold life.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.181-186
• /
• 2022

The world's electric automobile sector has shifted beyond technological environmental changes to a stage that has an impact on the market environment. And automakers are shifting from the existing strategy of "technological advantage → brand enhancement → sales expansion of existing internal combustion engine vehicles" to the expansion of the electric automobile market itself, which is to enhance market competitiveness. In addition, competition in the electric automotive parts market is expected to intensify due to the expansion of the business areas of existing parts makers and the entry of new companies, and development cooperation is expected to actively proceed to improve the efficiency of major eco-friendly parts. Along with this prospect, electric vehicles are expected to change the overall structure of the automobile industry, the overall growth of the electric vehicle value chain such as batteries, power trains (motors, power management and control systems), electric vehicle production, and charging infrastructure Is expected. Therefore, in this thesis, in order to cultivate a variety of high-quality human resources that companies want to keep pace with the changing automobile industry, we study a professional manpower training program that leads the growth engine of the electric automobile industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.170-175
• /
• 2005

Generally, Aluminum is superior to durability, light, and characteristics of the material are embossed luminant. So, these characteristics of aluminum will be used automobile interior parts by aluminum injection moulding. Especially, The external of Aluminum plate is engraved differing pattern by roller working. This working can use any longer and be seen gracefully. This is the reason why aluminum insert moulding is used. This feature of research can be characterized by simple process to customize aluminum sheet of blanking and forming process with internal parts of configuration if products are injected by aluminum sheet. Besides, to analysis completed Automobile interior parts to be concerned volumetric shrinkage, best gate location, fill time analysis and so on through the mold-flow before the aluminum insert moulding is worked.