• 산업공학
• /
• 제16권2호
• /
• pp.211-221
• /
• 2003

This paper introduces a simulation study regarding the design for the installation of Color Rescheduling Storage (CRS) in an automobile factory. In the painting shop the colors of vehicles are changed frequently according to the assembly schedule. When the color of a vehicle is changed from one to another, the cleaning process of painting-gun is necessary and it generates costs. Therefore many of the automobile manufacturers equip the CRS in front of the Top Coat Booth of the painting shop. The major objective of CRS is to reduce the change over cost in the painting process by grouping vehicles having same color. In this paper the configuration of CRS and the input/output algorithms are explained. The suggested system is verified using simulation models and experiments are conducted. Finally the best alternative is suggested by sensitivity analysis and evaluation of investment feasibility.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.1-20
• /
• 1997

The automotive industry as the major industry of the nation has affected both society and economy since the automobile was invented, and the main technique that help to performance improvement of the automobile has been developed. But, the painting technique lags behind the main technique of the automobile because that was neglected. Specially, we can say that in case of the painting technique of the automobile of our nation is so weak situation. After we changed the injecting pressure, the composition ratio (paint, hardener, thinner) and the injecting flow rate from spray-gun by PDPA, we studied the character of the injecting velocity and droplet size, and found the fittest condition. So, we got the following result to help mending paint technique of automobile surface. We could know the following fact from the experiment result. When it does mending paint of automobile, there is most suitable that to inject the paint as injecting pressure 200∼300 kPa and to inject the ratio of paint 10 : 1 : 1 when the fluid adjective knob valve spay-gun is open full.

• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.73-85
• /
• 1999

In this paper, the productivity estimation of the painting line in an automobile plant is studied. To improve the bottleneck and the weak point of the process, computer simulations are performed. In determining the system specification, the status of the conveyor lines and the other physical facilities are considered in order not to intervene with each other and to satisfy the painting facility restrictions. As simulation parameters, production performance ratio, number of hanger and dolley, down time, speed of conveyor and the pitch of a painting body are chosen on the basis of exhaustive field evaluation to study their effects on the capacity of the process. The results of the simulation show that we can improve the capability of they system without additional investment to the plant facility. The best condition for the maximum capacity of the process is selected by comparing the alternative computer simulation results. As a simulation language, Promodel is used which is very useful and easy to use in manufacturing oriented simulation.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.265-270
• /
• 2012

This paper deals with the application and effects of MES for H automobile plant in China. There existed the production planning and the different work order in PL painting plant, but we can simultaneously prepare the painting parts and parts delivery and assembly according to painting color by introducing MES. We can respond the change of production planning and operate integratively the PL painting, parts storage and parts delivery and then we can results in reasonable logistics. We obtained the exact production information, correct work order, precise delivery order. We obtained not only the improvement of logistics but also the reduction of inventory.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 춘계학술대회 논문집
• /
• pp.94-99
• /
• 1999

In this Paper, the estimation method of painting process in the automobile plant using computer simulation techniques is studied to improve the bottle neck process, the weak point and the productivity. For model and analysis, Promodel is used which is a manufacturing oriented simulation software developed by Promodel corporation in the U.S.A. Firstly the result of the simulation shows that we can obtain capability improvement in the system performance using computer simulation. Secondly, the optimum system specification is decided by comparing reports generated by scenario in simulation program find out the suitable conditions. Finally, the speed of conveyor and a pitch of painting body as the most critical parameters are chosen on the basis of exhaustive field evaluation to study their effects o the capacity of the process. The best alternative condition for the maximum capacity of the process is selected by computer simulation.

• Safety and Health at Work
• /
• 제4권4호
• /
• pp.216-220
• /
• 2013

A 46-year-old man who had worked as a bumper spray painter in an automobile body shop for 15 years developed lung cancer. The patient was a nonsmoker with no family history of lung cancer. To determine whether the cancer was related to his work environment, we assessed the level of exposure to carcinogens during spray painting, sanding, and heat treatment. The results showed that spray painting with yellow paint increased the concentration of hexavalent chromium in the air to as much as $118.33{\mu}g/m^3$. Analysis of the paint bulk materials showed that hexavalent chromium was mostly found in the form of lead chromate. Interestingly, strontium chromate was also detected, and the concentration of strontium chromate increased in line with the brightness of the yellow color. Some paints contained about 1% crystalline silica in the form of quartz.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1511-1515
• /
• 2004

Machine vision system plays an important role in factory automation. Its many applications are found in automobile manufacturing industries, as an eye for robotic automation system. In this paper, an automobile position measuring vision system(APMVS) applicable to manufacturing line for under body painting of a car is introduced. The APMVS measures position and orientation of the car body to be sealed or painted by the robots. The configuration of the overall robotic sealing/painting system, design and application procedure, and application examples are described.

• 한국시뮬레이션학회논문지
• /
• 제18권3호
• /
• pp.147-154
• /
• 2009

본 연구에서는 자동차 도장 공장의 가장 큰 낭비 요소인 상도 공정의 세정 비용의 절감 및 환경 보호를 목적으로 상도 공정 이전의 각 컨베이어 연결점에서의 운영 알고리즘 변경시의 셋업 감소 효과를 시뮬레이션 모델링을 통해 분석하였다. 또한 본 연구의 동기가 된 도장 공정에서의 세정 비용 최소화 프로젝트 및 도장 공장 현황에 대해 설명하였다. 시뮬레이션 결과 컨베이어 연결점에서의 운영 알고리즘 개선시 현재 1.8대의 그룹화 효율을 2.5대 수준으로 향상시킬 수 있음을 알 수 있었다. 본 연구에서 적용한 접근법을 사용할 경우 그룹화 효율 향상에 별도 설비 투자가 필요 없고, CRS(Color Rescheduling Storage) 설치와 병행 적용하여 그룹화 효율을 더욱 향상시킬 수 있는 이점을 가지고 있다.

• 한국환경과학회지
• /
• 제29권5호
• /
• pp.479-494
• /
• 2020

This study analyses the characteristics of volatile organic compounds (VOCs) emissions from the painting and printing facilities, as well as ambient VOCs at industrial complexes in Gwangju. The major components of VOCs emissions from painting facilities were toluene, acetone, 2-butanone, ethyl acetate, ethyl benzene, o-xylene and m,p-xylene. The printing facilities mostly emitted ethyl acetate, 2-butanone, acetone and toluene. Aromatics (49.9%) and oxygenated VOCs (43.6%) were dominant in painting facilities, while oxygenated VOCs (92.7%) were the largest group in printing facilities. The total hydrocarbon concentration (THC) in printing facilities was approximately six times higher than in the painting facilities. The painting and printing facilities use many solvents. Their THC concentrations differed considerably depending on the type of prevention facilities. To reduce THC, it is necessary to improve the prevention facilities and operating conditions. The dominant species of ambient VOCs in industrial complexes were investigated with toluene, ethyl acetate, 2-butanone, ethyl benzene, m,p-xylene, butyl acetate, o-xylene, hexane and acetone. Factor analysis of ambient VOCs showed that the main sources of the VOCs were organic solvents used in painting, coating, and printing, as well as automobile emissions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제26회 학술발표회 초록집
• /
• pp.77-77
• /
• 2004