• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.83-88
• /
• 2015

Due to low cost and high reliability, Brushless DC (BLDC) motors have been widely used in control applications such as robotics, aerospace and automobile. In the high performance control systems, it is very important to maintain the desired speed even in the face of parameter uncertainties, modeling errors, and disturbance signals. In this paper, we present an $H_{\infty}$ controller for the speed control of BLDC motors to achieve better performance of disturbance rejection. In particular, we discuss how to reduce an initial peaks of control input in the proposed $H_{\infty}$ controller. Some experimental results are provided to establish the effectiveness of the proposed method.

• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.21-28
• /
• 2001

The laser strengthening of 35kgf/㎟ and 60kgf/㎟ grade steel sheets is investigated by using CO$_2$ laser beam irradiation. The increase of tensile strength is dominated by the number of fully penetrated melting line. Also. the optimal laser input energy(hardness) and the number of melting line (melting width) are important variables for laser strengthening. Local strengthening by laser beam may be effective for the weight reduction of components where the tailored welded blank can not be applied.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.199-202
• /
• 1998

This paper describe an intelligent cruise control system for automobile. With the remarkable numerical increase of automobiles on the road, the optimized traffic flow control using the cruise control is one of the very important traffic problems to overcome the limitation of an existing road capacity. Based on this idea that minimize the fuel cost and the air pollution, and accept a driver's needs for driving, we have developed an intelligent cruise control system for vehicle. This proposed intelligent fuzzy cruise controller was successfully implemented using the fuzzy algorithm, the i80c196 μ-controller board and the throttle valve actuator. The field test results on an linear road was introduced.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.531-533
• /
• 2009

본 연구에서는 E-EGR Valve 내에 퇴적물이 쌓여 디젤엔진의 성능을 저하시키는 문제를 해결하기 위하여 CRDI 직분식 4기통 엔진에 장착된 E-EGR 밸브를 대상으로 형상변화에 따른 유동해석을 통하여 퇴적물 축적과 작동불량을 감소 시켜줄 새로운 형상을 제시하고자 하였다.

• 한국정밀공학회지
• /
• 제7권1호
• /
• pp.63-73
• /
• 1990

Low cost automatic welding machine is developed for the purpose of welding process automation of automobile parts with two dimensional welding joints. Developed gantry type machine is equipped with X, Y and roll axis stepping motors, and dirive units units are designed by two phase on drive scheme using shift registers. Control system is constructed by single board microcomputer of Z80A CPU, and also it is equipped with parallel input output ports and counter-timer chips. Linear and circular interpolation of welding head movement is accomplished by employing software digital differential analyzers. It has been shown that contour error of develped system is withi ${\pm}1.0mm$, meaning that the machine is suitable for CO2 arc welding process of automoble parts and is expected it's application to industry.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.154-160
• /
• 2007

The experimental system, developed in this research, is a teaching material that trains and practices automobile electric circuit in technical high school. This system consists of a textbook, 15 kinds of instruments and 62 kinds of 'Flash' animations. Textbook includes automobile electric circuits and experimental process. Instruments have 23 kinds of drills. Its is composed of electrical relays, motors, switches, light bulbs, electrical lines and power unit so on. 'Flash' animation displays an electrical current flow on circuits actually. Both Dacum method and ISD skill have been conducted to analysis job and design syllabus. The experimental system have been implemented on technical high school class to evaluate its objectivity and effect. It is expected that this system can contribute to studying of car service.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.24-31
• /
• 2000

QS-9000 was established by Chrysler, Ford, General Motors and some Truck Manufactures to solve problems of efforts to prepare original standards for each company. When we compare the requirements in QS-9000 with those in ISO 9000, we may observe that those of QS-9000 are more specific, since the user of the standard is limited to the automobile industry. In particular, the requirements on statistical techniques are described in more detail. In this paper, we present the requirements on statistical techniques in QS-9000. Specifically, we review the contents of QS-9000 and explore the philosophy and the minimum requirement on statistical techniques behind the description.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.675-677
• /
• 1998

In this paper, a development of the control system for the milling machine which is used to cut teeth of the automibile keys is presented as an example of the industry-university cooperation. The machine is controlled by a computer and a PLC. The control of the servo motors are accomplished by the computer and mechanical sequences are by PLC. This machine is capable of cutting key teeth up to the accuracy of 10 microns.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.100-107
• /
• 2010

This paper gives new conceptual descriptions of drag reduction mechanism owing to rotating wheel and moving ground condition when dealing with automotive aerodynamics. Using Computational Fluid Dynamics (CFD), flow simulation of three dimensional automobile configuration made by Vehicle Modeling Function (VMF) is performed and the influence of wheel arch, wheels, rotating wheel & moving ground condition to the automotive aerodynamic performance is analyzed. Finally, it is shown that rotating wheel & moving ground condition decreases automotive aerodynamic drag owing to the reduction of the induced drag led by the decrease of COANDA flow intensity of the rear trunk flow.

• 한국지역지리학회지
• /
• 제4권1호
• /
• pp.77-98
• /
• 1998

본 연구는 제조업 중에서도 지역성장 및 연관산업에 대한 파급효과가 가장 큰 부문인 자동차 산업을 대상으로 새로운 조립공장 입지가 지역경제의 성장 및 발전에 미치는 영향을 경계지리학적 관점에서 논의했다. 우리 나라의 대표적 신산업지구로 발전하고 있는 광양만권의 율촌 산업단지를 사례로, 한국 최대의 자동차 조림기업인 현대자동차의 새로운 조립공장 입지가 광주 전남의 자동차산업 전반에 어떠한 영향을 미칠 것인지, 그리고 보다 미시적 수준에서 광양만권에 어떠한 파급효과를 초래할 것인지 탐색해보고자 했다. 노동집약적 특성과 자본 및 기술집약적 특성을 동시에 지니는 자동차 조립 및 부품생산 부문을 대상으로 첫째, 조립부문-부품생산부문의 공간적 비공간적 연계 특성을 규명하고 둘께, 광주 전남지역 자동차산업의 현 주소 및 이에 대한 신설 조립공장의 파급효과를 분석하며 셋째, 신설 조립공장 입지에 따른 광양만권 역내의 부품산업 발전 가능성을 전망함으로써 지역개발의 파급효과를 극대화할 수 있는 방안을 모색해보고자 하는 것이 본 연구의 목적이다.