• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.68-73
• /
• 2009

The purpose of this study is to assess key competencies, especially mathematical skills and communications skills, in order to find disaccord between industry and college in the field of automotive electricity on technical engineering education. For this study, an assessment sheet is consisted of nine questions items. Four questions items of them are to assess mathematical skills and five questions items of them are to assess communications skills. 134 copies returned assessment sheets are analyzed after data cleaning and it is concluded that disaccord between industry and college in the field of automotive electricity on technical engineering education is found.

• Journal of Engineering Education Research
• /
• v.11 no.3
• /
• pp.63-69
• /
• 2008

This study provides a program to promote effective project instruction. With a 4 step learning model as preparation, planning, implementation and evaluating it was adapted to a course of study in automobile electricity fields of college. The purpose of this study was to document project process from the learner's point of view and examine the effect of project instruction with recognition of learner who has completed a course of project study. The data from 28 learner in hardware and software automobile electricity fields of college were collected and interpreted statistically by t-test at the .05 level of significance. It was concluded as follows. It emphasizes the importance not only of motivating active group effort and cooperative relationship between group members, but also communication with presentation in order to have a successful accomplishment of a project.

• Journal of Environmental Policy
• /
• v.11 no.3
• /
• pp.97-122
• /
• 2012

This article analyzes the effects of energy price increase induced by GHGs mitigation policy on automobile industry empirically. An increase in energy price due to GHGs mitigation policy does not have a significant effect on the production and the value-added in automobile industry. Electricity price has a negative effect on the production and the value-added in automobile industry, but it is not significant. However, employment is significantly affected by a change in electricity price. Export is also affected negatively, but the effect is insignificant. These results imply that GHGs mitigation policy such as carbon tax might affect adversely the employment in automobile industry. Especially, their effects on employment are significant. Therefore, some moderating measures to relieve the adverse effects on employment in automobile industry should be called upon with the implementation of GHGs mitigation policy.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.69-73
• /
• 2001

Due to the rapid increase of automobiles and daily driving distances, air pollution by automobiles is still dominant problem of large city in spite of strict emission refutation and development of reduction technologies. Among the air pollution resources of automobile , industry. electricity generation and heating. automobile keeps 51% of total nationwide air pollution in 1998 and this proportion Is increasing in large cities from 65% to 85%. To reduce these air pollution. catalytic converter and electronic engine control, exhaust gas re-circulation and evaporative emission control system have continuously developed and applied to automobiles since 1987. Also strong emission standards and emission durability warranty have enforced and monitored annually by sampling several vehicle models. But technologies and regulations are incomplete, driver should participate in reducing air pollution for himself by planning driving, avoiding unnecessary idle and air conditioning, keeping periodic maintenance and using mass transportation.

• Advances in Energy Research
• /
• v.3 no.3
• /
• pp.167-179
• /
• 2015

This paper presents a techno-economic analysis of a partial repowering scheme for an existing 210 MW coal fired power plant by integrating a gas turbine and by employing waste heat recovery. In this repowering scheme, one of the four operating coal mills is taken out and a new natural gas fired gas turbine (GT) block is considered to be integrated, whose exhaust is fed to the furnace of the existing boiler. Feedwater heating is proposed through the utilization of waste heat of the boiler exhaust gas. From the thermodynamic analysis it is seen that the proposed repowering scheme helps to increase the plant capacity by about 28% and the overall efficiency by 27%. It also results in 21% reduction in the plant heat rate and 29% reduction in the specific $CO_2$ emissions. The economic analysis reveals that the partial repowering scheme is cost effective resulting in a reduction of the unit cost of electricity (UCOE) by 8.4%. The economic analysis further shows that the UCOE of the repowered plant is lower than that of a new green-field power plant of similar capacity.

• Journal of Power System Engineering
• /
• v.2 no.1
• /
• pp.80-85
• /
• 1998

Engineering plastics have been magnified its usability due to its outstanding mechanic al, electrical and chemical properties, for example, in the area of computer, electricity, electronics, automobile, camera industry. In recent, automobile speedometer system is changing from manual operation to motor operation. All plastic gears inserted by metal shaft are used In motor operated speedometer system. Therefore, in this research, experimental investigation of the shrinkage phenomenon was executed according to various inserted depth and injection conditions. In experiments, the inserted depth was controlled as 30% and 90% of the total thickness of the plastic gear. The main parameters of injection process were selected as injection pressure, holding pressure, melt temperature, injection rate. As main results, free shrinkage rate of the test part is increased about 4 times to restricted shrinkage rate and shrinkage phenomenon against all injection conditions have a trivial effect on the test parts as conventional parts.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.206-214
• /
• 2022

Automobile manufacturers in each country are spurring the development of electric vehicles that use electric energy, an eco-friendly energy, as a futuristic vehicle. Electric vehicles have the advantage of no harmful gas or environmental pollution and low noise. Unlike automobiles using existing internal combustion engines using fossil fuels, electric vehicles use the electricity of batteries to cause rotational motion of motors. In the electric vehicle driven by the motor, it is indispensable to develop a controller for controlling the motor. One of the areas where automobile manufacturers are concentrating is the development of small electric vehicles as a personal transportation means. Small electric vehicles such as electric motorcycles, one-seat electric vehicles and two-seat electric vehicles are expanding the market as a means of operating throughout the city. In the domestic road conditions with many hills, it is effective to have a separate transmission system for small electric vehicles to drive smoothly. In this study, we propose a new type of continuously variable transmission(CVT) system to ensure that small electric vehicles can be driven smoothly in hilly domestic terrain. The proposed CVT system is equipped with a basic disk and a rotational disk in the driving pulley and the driven pulley, respectively, and is applied with a sloping spline to rotate the rotational disk. To commercialize the proposed CVT system, an experimental device was developed to examine the power transmission efficiency and the configuration of the CVT system was proposed.

• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.22-27
• /
• 2006

This paper presents the control system of high-efficiency automotive 35W metal-halide lamp ballast using the new control method and planar transformer. In this paper, the electronic ballast is designed so that digital control method by microcontroller can be applied to the electronic ballast for the lamp requirement and peripheral environment in order that metal-halide lamp, which has the complicated transient features, is to be applied to the automobile even if it has superior features in brightness, color rendering, light efficiency, and lifespan compared to the conventional halogen lamp. Also, the efficiency increase of the ballast is devised by being varied the switching frequency of Flyback Converter following the battery input voltage of the automobile. Being designed for high-frequency switching transformer of converter in planar form, reduction of loss, weight, overall size are realized and efficient power control in the automobile that had the limited energy and the limited space of battery is devised. The results of the proposed system is verified through various experiment results.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.222-228
• /
• 2022

As a means to cope with the climate change crisis caused by global warming, automobile manufacturers continue to make efforts to use the driving energy of vehicles as electricity. As a result, parts industry such as battery, motor, and controller are attracting attention. China is often seen in large cities, with electric vehicles such as electric bicycles, electric motorcycles, and small electric vehicles popularized and commercialized, mainly in large cities. However, small electric vehicles are not popular in Korea, which is why the country's topography is high in hills. In order to drive the hilly domestic roads, power performance including vehicle climbing ability should be improved. In order to improve the power performance and the climbing capacity of small electric vehicles, the capacity of the motor should be increased. However, when the performance of the motor is improved, the weight of the motor becomes heavy and the price competitiveness is likely to decrease. In addition, in order to operate a high-performance motor, the power consumption of the battery is rapidly increased, so various problems must be solved. In order to commercialize a small electric vehicle for one or two people who do not emit harmful exhaust gas to the human body in a hilly domestic terrain, it is effective to have a separate transmission system. In this study, we were conducted dynamometer test to produce a continuously variable transmission(CVT) system prototype using a spring that can be applied to a small electric vehicle and to install a CVT system prototype manufactured in a small electric vehicle. The dynamometer test results showed that the maximum speed performance, acceleration performance, and climbing performance were improved.

• The Journal of Society for e-Business Studies
• /
• v.6 no.1
• /
• pp.35-53
• /
• 2001

Electronic catalog is a kind of electronic document to exchange product and service data for B2B or B2C EC(electronic commerce). Up to date a lot of selution/service providers which develop EC systems such as shopping malls, have constructed electronic catalogs. However, they use different contents, formats, and exchange methods without a standardized concept and consistent definition of components. This causes problems that time and cost to develop catalogs are duplicated and data exchange across e-marketplaces is difficult. In order to resolve these problems, standardization works for electronic catalog are carried out inside and outside the country. In this paper, we introduce types of standards concerned with electronic catalog, trends of standardization activities, and domestic standardization activities by industry such as electronics, automobile, shipbuilding, heavy industry, steel, electricity, construction, distribution, biomedical, and textile.