• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.443-450
• /
• 2007

We overview the current distribution automation system in Korea and point out the limitations of the distribution services which can be provided by the current system. In this paper we propose a new distribution system architecture which is based on the peer-to-peer communication model. In this decentralized architecture the intelligent FRTUS can initiate data transmission without any interruption of a central server, and can exchange data with other FRTUS as peers. In order to support the peer-based distribution system, we specify the requirements for new communication network and suggest a way of improving the current distribution network where we adapt an intelligent module for protection and restoration, called MASX, and utilize the open communication network protocols. We also show how the new architecture can enhance major distribution services such as protection, automatic restoration, and equipment management.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.78-83
• /
• 2000

Passive sonar system is designed to classify the underwater targets by analyzing and comparing the various acoustic characteristics such as signal strength, bandwidth, number of tonals and relationship of tonals from the extracted tonals and frequency lines. First of all the precise detection and extraction of signal frequency lines is of particular importance for enhancing the reliability of target classification. But, the narrowband frequency lines which are the line formed in spectrogram by a tonal of constant frequency in each frame can be detected weakly or discontinuously because of the variation of signal strength and transmission loss in the sea. Also, it is very difficult to detect and extract precisely the signal frequency lines by the complexity of impulsive ambient noise and signal components. In this paper, the automatic detection and extraction method that can detect and extract the signal components of frequency tines precisely are proposed. The proposed method can be applied under the bad conditions with weak signal strength and high ambient noise. It is confirmed by the simulation using real underwater target data.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.389-393
• /
• 2007

The distribution of donated blood for medical purpose is an area that presents many challenges. In order to establish a comprehensive solution, the current patterns of distribution must be reviewed and problems related to it need to be clearly understood. This paper introduces 'Radio Frequency Identification (RFID) System', as a potential solution to some of the problems which arise in the process of blood supply distribution, and a way to systematically manage the blood supply. For the various possible RFID systems, the reader and tag must be suitable for the purpose of blood distribution. A database has been designed that can recognize tags and objects in a ubiquitous RFID blood distribution system. In this paper, we design the real-time software to control the RFID reader system and transponder, using the EEPROM memory by RFID. The experimental results confirm that the transmission rate of 3.9kbps for RF is 125 KHz. The electric power usage of transponder chip is $100{\mu}W$, with the recognition distance is about 7cm range.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.61-68
• /
• 2010

In this paper, we investigate the performance of ARQ-aided Time Switched Transmit Diversity (ARQ-TSTD) applying the multi-level control signaling in the WCDMA LCR-TDD system. Proposed ARQ-TSTD system applies the multi-level control signaling scheme in which the receiver sends the response signal (ACK or NACK signal) to the transmitter and defines NACK2 signal for multi-level control. Transmitter utilize the NACK2 control signal to the postponement of transmission and multi-user scheduling scheme proposed by this paper. Simulation results demonstrate that the proposed postponement of transmission and multi-user scheduling scheme yield about 1.3dB, 1.4dB performance gain respectively, compared with the conventional ARQ-TSTD with antenna switching scheme in tenn of the frame error rate (FER) for mobile speed of 3km/h and FER value of 10%. In addition, 14% and 11.5% of throughput gain respectively is shown when Eb/N0=-3dB.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.743-746
• /
• 2019

In this paper we proposed a new ocean radiation automatic monitoring system. The proposed system has the following characteristics: First, using NaI + PVT mixed detectors, the response speed is fast and precision analysis is possible. Second, the application of temperature compensation algorithm to scintillator-type sensors does not require additional cooling devices and enables stable operation in the changing ocean environment. Third, since cooling system is not needed, electricity consumption is low, and electricity can be supplied reliably by utilizing solar energy, which can be installed at the observation deck of ocean environment. Fourth, using GPS and wireless communications, accurate location information and real-time data transmission function for measurement areas enables immediate warning response in the event of nuclear accidents such as those involving neighboring countries. The results tested by the authorized testing agency to assess the performance of the proposed system were measured in the range of $5{\mu}Sv/h$ to 15mSv/h, which is the highest level in the world, and the accuracy was determined to be ${\pm}8.1%$, making normal operation below the international standard ${\pm}15%$. The internal environmental grade (waterproof) was achieved, and the rate of variation was measured within 5% at operating temperature of $-20^{\circ}C$ to $50^{\circ}C$ and stability was verified. Since the measured value change rate was measured within 10% after the vibration test, it was confirmed that there will be no change in the measured value due to vibration in the ocean environment caused by waves.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.45-53
• /
• 1998

Traction control systems(TCS) improve vehicle acceleration performance and stability, particularly on slippery roads through engine torque and/or brake torque control. This research mainly deals with the engine control algorithm based on adjustment of the engine throttle valve opening. Hardware-in-the-loop simulation(HWILS) is carried out where the actual hardware is used for the engine/automatic transmission and TCS controller, while various vehicle dynamics are simulated on real-time basis. Also, use of the dynamometer is made in order to implement the tractive force that a road applies to the tire. Although some restrictions are imposed mainly due to the capability of the synamometer, simplified HWILS results show that the slip control algorithm can improve the vehicle acceleration performance for low-friction roads.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.171-176
• /
• 2002

This paper is the study on stress analysis of spur gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when a pair of gear contact.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.816-819
• /
• 2002

This paper is the study on stress analysis for tooth modification of high speed gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when gear tooth contacts. And this paper proposes method for the tooth modification after carrying out stress analysis using a finite element method.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.100-105
• /
• 2010

This study is to analyze the performance for ADS-B(Automatic Dependent Surveillance-Broadcast) operations by the Balanced Scorecard(BSC). It is also to collect the opinions of users(pilots, air traffic controllers and ground operators) relating ADS-B and to use the results as data about preparing political measures of aviation safety. For these purpose, BSC model redesigned on 4 different points of view is used for measuring the performance of the ADS-B operation. The proposed perspectives are affairs effectiveness, user orientation, system orientation and the capacity. As the results of this study, it is showed that the continuous development of ADS-B should be required and the users must be involved in the activities, additionally, the relevant authorities should try to be drawn the user-oriented results through the process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1008-1012
• /
• 1997

This study is on a mathematical model of profile shifted involute gear, and this model is based on Camus's theory. Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers bit power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shape curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. So we draw three dimensions gear have accurate mathematical function using ADS(Automatic Drawing system), VisualLISP. To check accuracy and perfection, we make a program of checking Interference. and use for this study.