• Journal of applied mathematics & informatics
• /
• 제19권1_2호
• /
• pp.215-229
• /
• 2005

In this paper, constraint aggregation is combined with the adjoint and multiple shooting strategies for optimal control of differential algebraic equations (DAE) systems. The approach retains the inherent parallelism of the conventional multiple shooting method, while also being much more efficient for large scale problems. Constraint aggregation is employed to reduce the number of nonlinear continuity constraints in each multiple shooting interval, and its derivatives are computed by the adjoint DAE solver DASPKADJOINT together with ADIFOR and TAMC, the automatic differentiation software for forward and reverse mode, respectively. Numerical experiments demonstrate the effectiveness of the approach.

• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.491-496
• /
• 2003

This study was performed to develop an automatic sacking device for the combine harvester which was constituted input/output signal system, controller, delivery device, shooting device, pneumatic system for shooting operation, vibration device fer sacking operation and a new developed sacking bag. A new developed automatic sacking device and new sacking bag were operated well in general. And they were possible to develop a new combine to reduce of fatigue, to improve the safety and the performance. In developed device, The optimum delivery velocity of conveyer for sacking was 5.16 mm/sec. In sacking device, sacking discharge was shown 94％ with non-vibration condition and sacking discharge was shown 99％ with vibration condition, respectively.

• 센서학회지
• /
• 제22권6호
• /
• pp.387-392
• /
• 2013

Camera rigs for shooting 3D video are classified as manual, motorized, or fully automatic. Even in an automatic camera rig, the process of Stereoscopic 3D (S3D) video capture is very complex and time-consuming. One of the key time-consuming operations is capturing the distance parameters, which are near distance, far distance, and convergence distance. Traditionally these distances are measured by tape measure or triangular indirect measurement methods. These two methods consume a long time for every scene in shot. In our study, a compact laser distance sensing system with long range distance sensitivity is developed. The system is small enough to be installed on top of a camera and the measuring accuracy is within 2% even at a range of 50 m. The shooting time of an automatic camera rig equipped with the laser distance sensing system can be reduced significantly to less than a minute.

• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.41-48
• /
• 2000

최근 산업현장의 모든 부분에서 자동화의 요구가 급격하게 증가되고 있다. 지금까지의 사격장 시스템은 정적인 환경을 중심으로 설계되어져 왔다. 그러나, 실제의 사격상황은 목표물이 동적이므로 다른 사격 환경 변화가 요구된다. 본 연구에서는 동적인 사격환경을 구현하기 위해 1개 사로에 4대의 타겟을 설치하여 사격순서를 순차 및 비순차로 구분하고 사격시간을 가변적으로 조정할 수 있게 하였다. 그리고. 자동차 및 빌딩 자동화에 많이 응용되고 있는 CAN(Controller Area Network)을 이용함으로써 효율적인 통신을 가능하게 하였다. CAN은 높은 데이터 전송률과 안정성을 제공할 수 있어 다수의 ECU(Electric Control Unit)를 상호 연결하여 분산된 실시간 제어를 효율적으로 지원할 수 있다.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.106-112
• /
• 2000

Cognition and control of grinding trouble occurring during the grinding process are classified into a quantitative knowledge which depends on experimental data and qualitative knowledge which relies on skiful engineers. grinding operations include a large number of functional parameters since there are several ways of coping with ginding trouble. One is the qualitative method which depends on empirical knowledge utilizing the skilful experts from the workshop the other is the quantitative method which utilizes the experimental data obtained by sensor. But they are all difficult to accomplish from the grinding trouble-shooting system The reason is that grinding troubles are not accomplish from the grinding trouble-shooting system,. The rason is that grinding troubles are not easily controlled in the quantitative method and therefore trouble-shooting has mainly relied on the knoledge of skiful engineers. Thus there is an important issue of how a grinding touble-shooting system can be designed and what knowledge is utilized among the large amount of grinding trouble information. In this paper basic strategy to develop the grinding database by taking rule-based model which is strongly depended upon experience and intuition is described.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.56-61
• /
• 2000

Cognition and control of grinding trouble occurring during the grinding process are classified into a quantitative knowledge which depends on experimental data and qualitative knowledge which relies on skilful engineers. Grinding operations include a large number of functional parameters, since there are several ways of coping with grinding trouble. One is the qualitative method which depends on empirical knowledge utilizing the skilful experts from the workship, the other is the quantitative method which utilizes the experimental data obtained by a sensor. But, they are all difficult to accomplish from the grinding trouble-shooting system. The reason is that grinding troubles are now easily controlled in the quantitative method, and therefore, trouble-shooting has mainly relied on the knowledge of skilful engineers. Thus, there is an important issue of how a grinding trouble-shooting system can be designed and what knowledge is utilized among the large amount of grinding trouble information. In this paper, basic strategy to develop the grinding database of rule-based model, which is strongly depended upon experience and intuition , is described.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.492-497
• /
• 1999

Cognition and control of grinding trouble occurring during the grinding process are classified into a quantitative knowledge which depends on experimental data and qualitative knowledge which relies on skillful engineers. Grinding operations include a large number of functional parameters, since there are several ways of coping with grinding trouble. One is the qualitative method which depends on empirical knowledge utilizing the skilful experts from the workshop, the other is the quantitative method which utilizes the experimental data obtained by sensor. But, they are all difficult to accomplish from the grinding trouble-shooting system. The reason is that grinding troubles are not easily controlled in the quantitative method, and therefore, trouble-shooting has mainly relied on the knowledge of skilful engineers. Thus, there is an important issue of how a grinding trouble-shooting system can be designed and what knowledge is utilized among the large amount of grinding trouble information. In this paper, basic strategy to develop the grinding database of rule-based rule, which is strongly depended upon experience and intuition, is described.

• 항공우주기술
• /
• 제8권1호
• /
• pp.1-9
• /
• 2009

스마트무인기는 수직이착륙과 고속비행이 동시에 가능하도록 헬리콥터와 고정익 항공기 의 장점을 결합한 틸트로터 항공기이다. 현재 지상통합시험을 수행중이며, 4자유도 지상치구시험과 안전줄 호버시험을 거쳐 비행시험을 수행할 예정이다. 스마트무인기에 적용된 제어법칙을 검증하기 위해서 40%축소기를 개발하여 비행시험을 수행하였다. 비행시험결과 예측하기 어려웠던 틸트로터 항공기의 고유한 기술적인 문제점들이 발생하였으며, 이러한 문제점을 해결하여 전자동 비행시험을 완료하였다. 본 논문에서는 국내 최초로 수행된 축소형 틸트로터 항공기의 비행시험 과정 중에 발생한 주요한 문제점을 서술하고, 그 해결과정을 상세하게 기술하였다. 축소형 틸트로터 항공기의 전자동 비행시험 수행을 통해 경험한 시행착오와 개선사항은 향후 계획된 스마트 무인기의 실물기 비행시험을 성공할 수 있는 훌륭한 초석이 될 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• 한국산업정보학회논문지
• /
• 제15권2호
• /
• pp.69-81
• /
• 2010

LCD 모니터의 백라이트로 CCFL 형광체를 많이 사용하고 있으나 그 불량여부는 육안에 의존하고 있다. 육안 검사를 함으로써 부품에 대한 일관성 있는 검사가 결여되고, 노동집약적인 검사로 인해 산업적 재해가 발생할 수 있다. 따라서, CCFL 불량유무를 판별하기 위해서 물리적 촬영 환경과 영상처리 알고리즘은 중요하다. 본 논문에서는 CCFL 형광체를 검사하기 위한 촬영환경에 대하여 설명하고, 촬영환경 중 돔 근거리 조명과 점원거리 조명에서의 몇 가지 불량판별 알고리즘을 제시하였다. 불량을 포함한 CCFL 형광체를 사용하여 실험을 수행하였고, 그 결과 제안한 촬영환경과 알고리즘은 불량 판별율 98.32 %와 과검율 4.88 %의 성능을 나타내었다.