• 전기학회논문지
• /
• 제57권10호
• /
• pp.1744-1751
• /
• 2008

This paper presents a monitor positioning algorithm to identify the power quality event source in the distribution system with distributed generations. This algorithm determines the appropriate number of monitors and their locations considering power system topology together with distributed generation. This paper summarizes the guidelines of monitor positioning into five principles and defines the weighting factors according to the principles. To evaluate the adequacy of monitor positioning results, ambiguity indices considering monitor location and system topology are proposed. The optimal number and locations of monitors are determined from optimization routine using the weighting factors and the monitor positioning results are evaluated in terms of ambiguity indices. The algorithm is applied to IEEE 13 bus test feeder and suggests the optimal number and locations of power quality monitors. The proposed approach can realize the expert's knowledge on monitor positioning into a sophisticated automatic computing algorithm.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2000년도 추계학술발표논문집
• /
• pp.502-505
• /
• 2000

본 논문에서는 상태 전이 분석과 연관 마이닝 기법을 이용하여 새로운 침입 탐지 알고리즘인 침입 시나리오 자동 생성 알고리즘(Automatic Generation Algorithm of the Penetration Scenarios : AGAPS)을 개발하고자 한다. 침입을 탐지하기 위하여, 먼저 상태 전이 기법을 이용하여 네트워크를 통해 전달된 명령어들에 대한 상태 테이블을 생성한다. 그리고 연관 마이닝 기법을 이용하여 명령어들의 연관 규칙을발견한 후, 이러한 명령어들이 불법 침입과 관련된 명령어들인지를 판별함으로서 불법 침입 여부를 판단한다.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.224-233
• /
• 1996

An automatic mesh generation scheme with triangular finite elements on three-dimensional surfaces has been developed. The surface triangulation process is performed as follows. To begin, surfaces with key nodes are transformed to two-dimensional planes and the meshes with triangular elements are constructed in these planes. Finally, the constructed meshes are transformed back to the original 3D surfaces. For the mesh generation, an irregular mesh generation scheme is employed in which local mesh densities are assigned by the user along the boundaries of the analysis domain. For this purpose a looping algorithm combined with an advancing front technique using basic operators has been developed, in which the loops are recursively subdivided into subloops with the use of the best split lines and then the basic operators generate elements. Using the split lines, the original boundaries are split recursively until each loop contains a certain number of key nodes, and then using the basic operators such as type-1 and type-2, one or two triangular elements are generated at each operation. After the triangulation process has been completed for each meshing domain, the resulting meshes are finally improved by smoothing process. Sample meshes are presented to demonstrate the versatility of the algorithm.

• 한국경영과학회지
• /
• 제13권1호
• /
• pp.51-64
• /
• 1988

A new approach to the logical design of 4NF database shceme, which can be easily automated, is proposed. The main features of the approach are : introduction of a single attribute right hand side, extension of the concept of independent relations, semantic analysis, and adaoption of dependency matrix. The underlying viewpoints of functional relationships of the approach are different from Fagin's in that we distinguish functional and multivalued dependency in terms of cardinality. An algorithm for automatic generation of fourth normal form is presented and implemented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1141-1144
• /
• 2002

The research on computer graphics(CG) has been actively studied and developed. Namely, many surface/solid models have been proposed in the field of computer aided geometric design as well as the one of CG. Since it is difficult to visualize the complex shape exactly, an approximation by generating a set of meshes is usually used. Therefore it is important to guarantee the quality of the approximation in consideration of the computational cost. In this paper, a mesh generation algorithm will be proposed for a surface defined by Lie algebra. The proposed algorithm considers the quality in the meaning of validation of invariants obtained by the mesh, using automatic differentiation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.69-76
• /
• 1998

Due to the drastic improvement of computer hardware and operating system, it is easy to break through the main defects of limited computer memory and processing time, etc. To keep up with this situation, this paper is focused on developing the preprocessor program with the input method based on vector graphic editor and the preprocessing technique including automatic node generation algorithm for the $\rho$-version finite element program. To develop this preprocessor program, the special data structure and the OOP(Object Oriented Programming) have been used by the Visual Basic 4.0. The Special data structure is proposed to describe the geometric data of node numberings and coordinates suitable for the $\rho$-version finite element program, which are quite different from the comvential h-version finite element program.

• ETRI Journal
• /
• 제43권4호
• /
• pp.594-602
• /
• 2021

Recently, quantitative and repetitive inspections of the old urban area were conducted because many structures exceed their designed lifetime. The health of a building can be validated from the condition of the outer wall, while the slant angle of the wall widely serves as an indicator of urban regeneration projects. Mostly, the inspector directly measures the inclination of the wall or partially uses 3D point measurements using a static light detection and ranging (LiDAR). These approaches are costly, time-consuming, and only limited space can be measured. Therefore, we propose a mobile mapping system and automatic slant map generation algorithm, configured to capture urban environments online. Additionally, we use the LiDAR-inertial mapping algorithm to construct raw point clouds with gravity information. The proposed method extracts walls from raw point clouds and measures the slant angle of walls accurately. The generated slant angle map is evaluated in indoor and outdoor environments, and the accuracy is compared with real tiltmeter measurements.

• 한국문헌정보학회지
• /
• 제35권4호
• /
• pp.141-160
• /
• 2001

본 연구에서는 자연어를 이용하여 자동으로 정보검색을 수행하는 시스템을 구축하였다. 구현 시스템은 Delphi 4.0(PASCAL)으로 프로그래밍 하였으며, 자동색인, 클러스터링 기법, 자연어 계층관계의 구축과 표현, 자동정보탐색이 가능하도록 구성했다. 이 시스템을 이용하여 질의어의 표현, 생성, 확장, 탐색식의 구성, 피드백 탐색 등 정보탐색의 전과정을 자동으로 수행할 수 있었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.92-92
• /
• 2002

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.472-480
• /
• 2014

The In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through new coordinates transformation calculating the height and azimuth of the sun.