• 자동차안전학회지
• /
• 제16권3호
• /
• pp.55-63
• /
• 2024

As autonomous driving performance, such as automatic emergency braking (AEB) and advanced driver assistance systems (ADAS), continues to improve, collision angles and occupant seating postures become more diverse, and there is a need to study how occupant injury mechanisms change depending on the type of collision. Accordingly, a representative crash test mode was derived. Using the derived crash test mode, we analyzed the crash injury mechanism according to the impact angle and the occupant's seating posture (seat back angle). Sled is a crash simulation test that applies a pulse corresponding to the vehicle body acceleration pulse generated during a collision. Sled testing has advantages in terms of cost and time compared to actual vehicle crash testing. We focus on the correlation between crash tests reflecting autonomous vehicle crash modes and Sled tests. The results obtained through this study can be used to develop new crash evaluation methods. As a result, we will present the results of an experimental study on the actual vehicle crash test Sled test method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.452-456
• /
• 2009

This paper presents a method for precisely localizing and parking of bimodal trams. In order to gam an automatically driving system for bimodal trams, precise up-to-date localization, velocity recognition, distance to next station and precise parking location estimation functions are required. This paper proposes a system consisting of control device, steering device, sensor input equipment, driving system, tachometer, vehicle-side sensors, magnetic markers and magnetic sensors. The tram recognizes the precise location via magnetic markers containing information. Parking position and precise distance calculation is embodied by a tachometer. The vehicle-side sensors are used to assure safe station approaching and parking magnetic markers provide improvement of precision while tram parking. This paper provides a system realizing localization and precise parking and afterwards the automatic drive test results are reported and analyzed.

• 디지털융복합연구
• /
• 제19권12호
• /
• pp.145-150
• /
• 2021

공공장소에서 지속적으로 방역을 수행하기 위해서는 인력확보가 쉽지 않은데 자율주행 기반 로봇을 활용하면 인력으로 인한 문제를 해결할 수 있다. 자율주행 기반 방역로봇은 별도의 인력 투입 없이 공공기관과 병원 등의 유해 바이러스 확산 및 질병을 지속적으로 예방 가능하다. 자율주행 기능은 피나클 필터 알고리즘을 적용하여 위치를 추정하고, 방역은 UV살균시스템 및 이산화염소 분사시스템을 적용하였다. 주행시간은 3시간 이상, 위치 오차는 0.5m.이내, 정지 회피하는 기능은 95%, 장애물 감지 거리는 1.5m에서 동작하였다, 자동충전 복구는 배터리 잔량 10%에서 충전거치대로 이동하여 충전이 되었다. 무인방역시스템으로 방역한 결과 인력배치 없이 UV살균은 99%, 이산화염소는 95% 이상 살균되어 막대한 사회적 비용을 절감하는데 자율주행 방역로봇이 기여할 수 있다.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.198-205
• /
• 2005

The mechanical system of a drive can often be modeled as a two- or three-mass-system. The load is coupled to the driving motor by a shaft able to perform torsion oscillations. For the automatic tuning of the control, it is necessary to know the mathematical description of the system and the corresponding parameters. As the manpower and setup-time necessary during the commissioning of electrical drives are major cost factors, the development of self-operating identification strategies is a task worth pursuing. This paper presents an identification method which can be utilized for the assisted commissioning of electrical drives. The shaft assembly can be approximated as a two-mass non-rigid mechanical system with four parameters that have to be identified. The mathematical background for an identification procedure is developed and some important implementation issues are addressed. In order to avoid the excitation of the system with its natural resonance frequency, the frequency response can be obtained by exciting the system with a Pseudo Random Binary Signal (PRBS) and using the cross correlation function (CCF) and the auto correlation function (ACF). The reference torque is used as stimulation and the response is the mechanical speed. To determine the parameters, especially in advanced control schemes, a numerical algorithm with excellent convergence characteristics has also been used that can be implemented together with the proposed measurement procedure in order to assist the drive commissioning or to achieve an automatic setting of the control parameters. Simulations and experiments validate the efficiency and reliability of the identification procedure.

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.93-98
• /
• 2023

In this paper, the development of an autonomous electric vehicle for logistics with a robotic arm is introduced. The manual driving electric vehicle was converted into an electric vehicle platform capable of autonomous driving. For autonomous driving, an encoder is installed on the driving wheels, and an electronic power steering system is applied for automatic steering. The electric vehicle is equipped with a lidar sensor, a depth camera, and an ultrasonic sensor to recognize the surrounding environment, create a map, and recognize the vehicle location. The odometry was calculated using the bicycle motion model, and the map was created using the SLAM algorithm. To estimate the location of the platform based on the generated map, AMCL algorithm using Lidar was applied. A user interface was developed to create and modify a waypoint in order to move a predetermined place according to the logistics process. An A-star-based global path was generated to move to the destination, and a DWA-based local path was generated to trace the global path. The autonomous electric vehicle developed in this paper was tested and its utility was verified in a warehouse.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1973-1979
• /
• 2000

Driving the need for machine vision system is growing consumer demand for quality and defect-free products. Especially it is the most important in tarpaulin's manufacturing process achieves automatically by machine vision instead of by man vision. In this paper pinholes detection is performed by using morphology algorithms. Top hat transform is one of morphology applications. This transform take high performance of defect detection in the case that unexpected changes occur in some non-uniform background. For pinholes defect, automatic visual inspection system has been developed, which was composed by a line-scan camera, illumination, a frame grabber, a motor driver and control units. This system has excellent capacity to defect pinholes to the 0.1 mm by 0.5 mm in size and to work in moving objects by maximum 20 m/min in speed.

• 한국멀티미디어학회논문지
• /
• 제13권10호
• /
• pp.1565-1574
• /
• 2010

기존에 차량 내에서 음악은 사용자의 선택에 의하거나 또는 임의 추출 방식으로 제공되었다. 방식은 사용자로 하여금 운전시 선택에 따른 피로감을 유발케 하거나 또는 운전자의 기호와 관계없는 음악이 제공됨을 의미한다. 이를 개선하기 위하여 운전자의 기호를 반영하여 자동으로 음악을 제공하고자 하는 많은 시도가 이루어지고 있다. 그러나 이러한 연구의 주요한 난제들로는, 첫 째 사용자의 기호를 판단하기가 어렵다는 것이고, 둘 째 판단된 상태에 따라 어떤 음악을 연주토록 하는 것들이 있다. 본 논문에서는 위에서 제기된 난제들 가운데 두 번째 문제 해결을 위하여 Hevner의 형용사 검사표에 기초하여 서로 다른 음악 장르의 분위기를 대표할 수 있는 형용사를 도출하고 이를 국내음악의 각 장르와 연관 지음으로써 운전자 기호와 음악 장르 사이의 매핑 관계를 최초로 도출하고자 한다. 본 논문에서 도출된 매핑 관계에 대한 타당성이 모의 차량 음악 제공 실험을 통하여 검토된다. 그룹별로 임의 선정된 음악에 대한 사용자 만족도 평가와 첫 번째 실험 방식에 능동적인 피드백용 더한 경우의 사용자 만족도 평가 절과가 비교 분석된다.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2016

A gasoline injector rig which can measure cumulative injected fuel mass under a vehicle driving condition was developed. The measurement system consists of an engine control unit (ECU), data acquisition (DAQ) and injected fuel collection system using loadcells. By supplying reconstructed sensor signals which simulate the real vehicle's sensor signals to the ECU, the ECU drives injectors as if they were driven in the vehicle. The vehicle's performance was computer simulated by using $GT-Suite^{(R)}$ software based on both engine part load performance and automatic transmission shift map. Throttle valve position, engine and vehicle speed, air mass flow rate et al. were computer simulated. The used vehicle driving pattern for the simulation was FTP-75 mode. For reconstructing the real vehicle sensor signals which are correspondent to the $GT-Suite^{(R)}$ simulated vehicle's performance, the DAQ systems were used. The injected fuel was collected with mess cylinders. The collected fuel mass in the mess cylinder with elapsed time after starting FTP-75 driving mode was measured using loadcells. The developed method shows highly improved performance in fast timing and accuracy of the cumulative injected fuel mass measurement under the vehicle driven condition.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.995-1000
• /
• 1999

This paper presents a optic system and a visual inspection algorithm looking for solder joint defects of J-lead chip which are more integrate and smaller than ones with Gull-wing on PCBs(Printed Circuit Boards). The visual inspection system is composed of three sections : host PC, imaging and driving parts. The host PC part controls the inspection devices and executes the inspection algorithm. The imaging part acquires and processes image data. And the driving part controls XY-table for automatic inspection. In this paper, the most important five features are extracted from input images to categorize four classes of solder joint defects in the case of J-lead chip and utilized to a back-propagation network for classification. Consequently, good accuracy of classification performance and effectiveness of chosen five features are examined by experiment using proposed inspection algorithm.

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.145-154
• /
• 2006

In the companion paper, the composition and structure of the MATDYMO (Multi-Agent for Traffic Simulation with Vehicle Dynamic Model) were proposed. MATDYMO consists of the road management system, the vehicle motion control system, the driver management system, and the integration control system. Among these systems, the road management system and the integration control system were discussed In the companion paper. In this paper, the vehicle motion control system and the driver management system are discussed. The driver management system constructs the driver agent capable of having different driving styles ranging from slow and careful driving to fast and aggressive driving through the yielding index and passing index. According to these indices, the agents pass or yield their lane for other vehicles; the driver management system constructs the vehicle agents capable of representing the physical vehicle itself. A vehicle agent shows its behavior according to its dynamic characteristics. The vehicle agent contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation is conducted for an interrupted flow model and its results are verified by comparison with the results from a commercial software, TRANSYT-7F. The interrupted flow model simulation is implemented for three cases. The first case analyzes the agents' behaviors in the interrupted flow model and it confirms that the agent's behavior could characterize the diversity of human behavior and vehicle well through every rule and communication frameworks. The second case analyzes the traffic signals changed at different intervals and as the acceleration rate changed. The third case analyzes the effects of the traffic signals and traffic volume. The results of these analyses showed that the change of the traffic state was closely related with the vehicle acceleration rate, traffic volume, and the traffic signal interval between intersections. These simulations confirmed that MATDYMO can represent the real traffic condition of the interrupted flow model. At the current stage of development, MATDYMO shows great promise and has significant implications on future traffic state forecasting research.