• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.459-466
• /
• 2002

In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

• 대한임베디드공학회논문지
• /
• 제11권1호
• /
• pp.15-20
• /
• 2016

Recently, the u-IT applications for plants and livestock become larger and control of livestock farm environment has been used important in the field of industry. We implemented wireless sensor networks and farm environment automatic control system for applying to the breeding barn environment by calculating the THI index. First, we gathered environmental information like livestock object temperature, heart rate and momentum. And we also collected the farm environment data including temperature, humidity and illuminance for calculating the THI index. Then we provide accurate control action roof open and electric fan in of intelligent farm to keep the best state automatically by using collected data. We believed this technology can improve industrial competitiveness through the u-IT based smart integrated management system introduction for industry aversion and dairy industries labor shortages due to hard work and old ageing.

• 한국축산시설환경학회지
• /
• 제8권2호
• /
• pp.63-72
• /
• 2002

In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권6호
• /
• pp.903-910
• /
• 2015

To maintain a predominantly pasture-based system, the large herd milked by automatic milking rotary would be required to walk significant distances. Walking distances of greater than 1-km are associated with an increased incidence of undesirably long milking intervals and reduced milk yield. Complementary forages can be incorporated into pasture-based systems to lift total home grown feed in a given area, thus potentially 'concentrating' feed closer to the dairy. The aim of this modelling study was to investigate the total land area required and associated walking distance for large automatic milking system (AMS) herds when incorporating complementary forage rotations (CFR) into the system. Thirty-six scenarios consisting of 3 AMS herds (400, 600, 800 cows), 2 levels of pasture utilisation (current AMS utilisation of 15.0 t dry matter [DM]/ha, termed as moderate; optimum pasture utilisation of 19.7 t DM/ha, termed as high) and 6 rates of replacement of each of these pastures by grazeable CFR (0%, 10%, 20%, 30%, 40%, 50%) were investigated. Results showed that AMS cows were required to walk greater than 1-km when the farm area was greater than 86 ha. Insufficient pasture could be produced within a 1 km distance (i.e. 86 ha land) with home-grown feed (HGF) providing 43%, 29%, and 22% of the metabolisable energy (ME) required by 400, 600, and 800 cows, respectively from pastures. Introduction of pasture (moderate): CFR in AMS at a ratio of 80:20 can feed a 400 cow AMS herd, and can supply 42% and 31% of the ME requirements for 600 and 800 cows, respectively with pasture (moderate): CFR at 50:50 levels. In contrast to moderate pasture, 400 cows can be managed on high pasture utilisation (provided 57% of the total ME requirements). However, similar to the scenarios conducted with moderate pasture, there was insufficient feed produced within 1-km distance of the dairy for 600 or 800 cows. An 800 cow herd required 140 and 130 ha on moderate and high pasture-based AMS system, respectively with the introduction of pasture: CFR at a ratio of 50:50. Given the impact of increasing land area past 86 ha on walking distance, cow numbers could be increased by purchasing feed from off the milking platform and/or using the land outside 1-km distance for conserved feed. However, this warrants further investigations into risk analyses of different management options including development of an innovative system to manage large herds in an AMS farming system.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 동계 학술대회 논문집
• /
• pp.415-419
• /
• 2002

가축 사양관리 시스템의 전자 개체 인식장치를 ISO 표준인 125kHz대 RFID 기술을 응용하여 유전지 태그와 리더를 개발하였다. 최대 인식거리는 37cm였으며, 인식율은 100회 반복실험에서 100%의 인식율을 보였다. 본 연구에서 개발된 유전지 태그에 건전지를 사용할 경우 수명은 2∼3개월 정도로 예상된다. 젖소의 평균 수명을 6∼7년으로 볼 때, 너무 짧은 것으로 판단된다. 따라서, 추후 태그의 수명 연장을 위해 저전력 소자 및 무전지 태그에 관한 연구가 계속 되어야 할 것으로 판단된다. 또한 메모리와 디코딩 회로를 추가하여 개체 코드 비트 수를 늘린다면, 태그에 그 개체의 출생 국가 및 지역, 생년월일, 목장 등의 정보를 할당이 가능해지므로, 보다 효율적인 사양 관리가 가능해 질뿐만 아니라 전염병 발생 시 경로 추적 및 출하 후 병적 추적 또한 가능해 질 것으로 판단된다. 본 장치가 상용화된다면, 수입에 의한 문제점 해결은 물론 국내 현실에 적합한 장치를 보다 낮은 가격으로 농가에 보급할 수 있게 되어, 국내 축산 농가의 국제 경쟁력 확보에 크게 기여할 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.652-657
• /
• 2018

젖소농가에서 착유생산성에 영향을 미치는 번식관리는 매우 중요한 요소이다. 젖소에서 번식관리는 발정의 조기 발견이 중요하며, 보다 정확하고 신속한 젖소의 발정시기에 대한 신뢰할 수 있는 자동 모니터링이 농가에는 필요한 실정이다. 본 연구에서는 젖소의 발정유무, 활동량변화, 반추위 운동량, 반추위 온도 및 pH 등을 측정하는 기기를 활용하여 발정에 대한 정확도를 측정하였다. 연구에 사용된 생체정보기기 S1(Smaxtec, Austria)는 반추위 내 삽입형타입으로 반추위의 온도, pH, 젖소의 활동량 및 음수횟수 추정 등을 이용하여 발정 유무의 알림을 제공하고, S2(Healthy Cow 24, SCR. Allflex. Israel)는 목걸이 타입으로 반추위 운동량, 젖소의 활동량으로 발정의 유무를 알려준다. 기기에서 수집되는 데이터는 1일 2시간 간격으로 획득하였고, 각각의 기준일(Reference day: RD ; -7~-3, +7~+3)은 수정일(-2, -1, 0, +1, +2)이 5일과 수정 전 7일에서 수정 후 7일에 대한 평균값을 기준으로 비교하였다. 본 논문에서 사용된 S1 기기의 활동성은 기준일(RD : $10.2{\pm}1.0/day$)에 비해 수정일(-1 : $12.5{\pm}1.03/day$ ;0 : $12.9{\pm}1.73/day$)에서 증가 하는 것으로 나타났다. S2 기기의 활동성 또한 기준일 (RD : $40.3{\pm}2.68$)에 비해 수정일(0 : $63.0{\pm}3.66$)에서 증가 하는 것으로 분석되었다. S1의 일일 음수횟수는 기준일(RD : $5.9{\pm}0.89/day$)에서 수정일 전까지는 (-2 : $5.6{\pm}0.98$ ; -1 : $5.7{\pm}0.96$)으로 감소하는 것으로 나타났으나, 수정일(0 : $6.3{\pm}0.86$ ;+2 : $6.0{\pm}0.73$)에는 기준일과 같은 횟수를 보였다. S2의 일일 반추횟수는 기준일(RD : $493.8{\pm}10.92$) 보다 수정일(-1 : $390.2{\pm}13.36$; 0 : $354.1{\pm}16.71$)에 감소하는 것으로 나타났다.