• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.564-568
• /
• 2005

As functional requirements of automatic office machines like printers, ATMs, copying machines are on a trend for the higher speed and precision, extensive technical advances are being developed and implemented in the industry. Media transport system is a device to convey a sheet of paper in ATMs and printers. The stability of media transport system is a matter of concern as their operating throughput rapidly increases. And defects of belts or rollers in a transport system directly affect the level of stability of the system. Therefore an automatic diagnostic system for predicting various defects is necessary for the stable operation of the media transport system. A simulation based on multi-body dynamics has been done for a feasibility study of a system design for the defect anticipation.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.366-371
• /
• 2006

As functional requirements of automatic office machines like printers, Automatic Tellex Machines(ATMs), copying machines are on a trend for the higher speed and precision, extensive technical advances are being developed and implemented in the industry. Media transport system is a device to convey a sheet of paper in ATMs and printers. The stability of media transport system is a matter of concern as their operating throughput rapidly increases. And defects of belts or rollers in a transport system directly affect the level of stability of the system. Therefore an automatic diagnostic system for predicting various defects is necessary for the stable operation of the media transport system. A simulation based on multi-body dynamics has been done for a feasibility study of a system design for the defect anticipation.

• International Journal of Railway
• /
• 제5권4호
• /
• pp.144-147
• /
• 2012

New transport technologies have been rapidly developed and various transport systems are ready to introduce. However, there no exists effective decision making tools for pre-feasibility studies on transport systems. The pre-feasibility studies should provide reliable solutions about whether a certain transport system is feasible or not by cost-benefit analysis and effectiveness test of enhancing regional economy. This study introduces the smart transport investment/information system (SMARTIS) for supporting decision making with ease, fast and reliable methods. The SMARTIS incorporates travel demand estimates into the process of feasibility studies with automatic data processing methods to give reliable solutions quickly. The SMARTIS is expected to be informative for transit agencies, planners, and operators.

• 제어로봇시스템학회논문지
• /
• 제2권2호
• /
• pp.81-87
• /
• 1996

Time delay control(TDC) law has been recently suggested as an effective control technique for nonlinear time-varying systems with uncertain dynamics and/or unpredictable disturbances. This paper focuses on the applications of the TDC algorithm to torque control of an engine system and speed control of an engine/automatic transmission system. Through the stability analysis of the engien system based on TDC, determination of the appropriate time delay and control factor is investigated. It was revealed that the size of time delay of the TDC law should be greater than that of transport delay of the system for both stability and better control performance. Simulation and experimental results for the engine torque control and engine/automatic transmission speed control systems show both relatively good command following and disturbance rejection properties. However, TDC controller shows rather slow responses when applied to the system with large transport delay.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.100-107
• /
• 1998

With the rapid development of Urban Mass Transit in China, the Intelligent Transport System becomes inevitable. Based on the brief introduction of the blueprint of Urban Mass Transit in Shanghai, this paper analyses in detail the components and functions of Automatic Train Control (ATC) system applied in Shanghai Metro, presents the key technology of the main three subsystems of the ATC system : Automatic Train Supervision (ATS) subsystem, Automatic Train Protection (ATP) subsystem, Automatic Train Operation (ATO) subsystem. After reading this paper, you will have an general grasp of ATC system. At the end of the paper, it suggests a good resolution about the ATC system equipment to be made in China. If you are interested in the resolution, we'd like to exchange our thought.

• 한국전자통신학회논문지
• /
• 제17권1호
• /
• pp.181-186
• /
• 2022

효율적인 물류 수송을 위한 수단으로 인터모달 자동운송 대차에 대한 요구가 있다. 인터모달은 이종 운송 수단과 연계, 특정 구간의 단선 운행에 대한 수요가 높은 특징을 가지고 있다. 본 연구에서는 인터모달 자동운송 대차 특징에 적합하도록 기존 철도 운행시스템과 달리 간소하면서도 인터모달 자동운송 대차에 최적화된 주행정보 시스템을 구현 및 실대형 시연모델에 적용하여 정위치 정차 및 각 시스템 간 원활한 인터페이스 및 간소화된 시스템으로 운용 사례를 제시한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.258-262
• /
• 1998

A structural design based of finite element analysis has been performed to investigate the reliable automatic transport system. For the procedure, different cross-sectional geometric factors were calculated and compared in detail. The von-Mises stresses were chosen to maintain a solid loading braring capacity for the safe design. Parametric studies showed that it is more inportant for the plate bending problem than the vertical loads of hanging bar to assess the safe and economic structural design.

• 한국ITS학회 논문지
• /
• 제6권1호
• /
• pp.27-37
• /
• 2007

과속단속시스템은 지능형교통체계(ITS)의 한 영역인 첨단교통관리시스템(ATMS)으로서 중요한 역할을 수행하고 있다. 그러나 과속사고를 방지하기 위해 설치된 시스템이 시거가 확보되지 않은 구간이나 급커브 지역 등에 설치됨으로써 추가적인 교통사고 위험을 내포하고 있다. 이에 본 연구에서는 고속도로의 기하구조별로 시스템 설치위치를 구분하고, 각 위치에서 발생한 교통사고 자료를 시스템 설치 전 후로 나누어 기하구조별 과속단속시스템의 설치 전 후의 사고건수(Frequency), 대물피해환산법(EPDO, Equivalent Property Damage Only)을 통한 사고심각도와 사고비용(Accident Cost)을 분석하였다. 이와 같은 연구수행 절차를 통해 시거가 충분히 확보되지 않는 구간에서의 과속단속시스템의 설치가 사고에 미치는 영향을 알아보고 최종적으로 과속단속시스템의 설치위치에 따른 영향을 분석하고자 한다.

• 한국ITS학회 논문지
• /
• 제10권4호
• /
• pp.100-106
• /
• 2011

무선통신환경에서는 RF신호가 매우 심하게 변하는데, 이러한 신호의 변화는 특히 차량통신환경에서 더욱 심해진다. 자동이득제어는 무선통신시스템에서 신뢰성 있는 통신환경을 제공하고 급격하게 변하는 수신신호를 보상하데 중요한 역할을 한다. 본 논문에서는 수신신호세기값과 아날로그-디지털변환값 두 가지 신호를 이용하는 간단하고 향상된 자동이득 제어기법에 대해 논의한다. 시물레이션과 실제 환경에의 측정을 통해 제안된 기법의 성능을 검증한다.

• International Journal of Railway
• /
• 제2권3호
• /
• pp.127-130
• /
• 2009

The system improves the safety and efficiency of railway transport, combining the advanced axle-counter with single-track semiautomatic block. Using computer, to accomplish relay-based semiautomatic block logic operation and axle-counter to check section status, it will further increase the performance of railway transport. Safety-related communication is one of the important topics in railway signal system. By referring to relevant safety-related communication standards, to research on safety-related communication of Micro-computer automatic block between Railway Stations System, the thesis introduces the basic requirements, concept model, codes, and the process, etc.