• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.905-912
• /
• 2010

Modern version of advanced supersonic fighter have ATCS (Automatic Thrust Control System) to maximum flight safety, fuel efficiency and mission capability the integrated advanced autopilot system such as TFS (Terrain Following System), GCAS (Ground Collision Avoidance System) and AARS (Automatic Attitude Recovery System) and etc. This paper addresses the design and verification of ATCS based on advanced supersonic trainer in HILS (Hardware In the Loop Simulator) with minimum hardware modification to reduce of development cost and maintain of system reliability. The function of ATCS is consisted of target speed hold mode in UA (Up and Away) and angle of attack hold mode in PA (Power Approach). The real-time pilot evaluation reveals that pilot workload is minimized in cruise and approach flight stage by ATCS.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 추계학술대회 학술발표 논문집
• /
• pp.271-274
• /
• 2001

Recently, most vehicles has the Automatic transmission system as their transmission system. The automatic transmission system operates with fixed shift patterns. In the opposite of manual operation, it is easy and convenient for driving. Though these merit, the system can not evaluate the driver's intension because of usage of fixed shift pattern, To consider driver's intension, we must consider both the driving intensity of driver and the status of vehicle. In this paper, we developed flexible automatic transmission system by using the proposed moduled neural networks which can learn the status of the vehicle and driver's intensity As a result, we compare the transmission system using fixed shift pattern and the proposed transmission system and show the good performance in the change of shift position.

• Journal of Multimedia Information System
• /
• 제1권2호
• /
• pp.95-100
• /
• 2014

Variable message signs (VMS) have the different sizes and a specific type according to the city scene and it has to be displayed by different message on the display panel in real-time. And VMS manufacturers must produce the different products in order to give a customized product to each order. In addition that, they should test and check the correct operation to each VMS product using the different message frame. That is very time and workers consuming and VMS emulator with an automatic variable message generator system is necessary. Also, the automatic message generator system is needed to real-time scheduling in order to display the message on the VMS panel like real world. In this paper, we design and implement the VMS emulator embedded the automatic message frame generator system with real-time scheduling which can set several parameters easily on the windows dialog.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.161-163
• /
• 2006

This paper introduce the technology of peak demand reduction using automatic water tank pumping system on the apartment. That systems on the apartments installed water tank can control pumping(electricity) demand. Generally, system peak demand is occurred at the same time on workday and many water pumps consume electric power randomly. At this point, shift of operating time of water pump can reduce peak demand using automatic water tank pumping system. We were operating this system on some apartments for test of effect of peak demand reduction. and we represent result of demand shift. This result suggests that spread of the automatic water pumping system can contribute to reduce system peak demand and reduce system operation cost.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.531-536
• /
• 2013

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

• 수산해양기술연구
• /
• 제39권1호
• /
• pp.1-7
• /
• 2003

When a ship is course-keeping in the open seas, autopilot system is adapted. The design of autopilot system is very important for improvement of ship′s element research. Automatic steering system consists of autopilot device, power unit, steering gear, magnetic or gyro compass and ship dynamics. In order to evaluate automatic steering system of ships in open seas. we need to know the characteristics of each component of the system, and also to know the characteristics of disturbance to ship dynamics. In this paper, I provide evaluation method of autopilot navigation system of the fishing ship. Prediction method based on the principle of linear superposition is introduced for irregular disturbance. For the evaluation of automatic steering system of a ship, "performance index" is introduced from the viewpoint of energy saving and calculation method is frequency response analysis. Finally, I carried out calculation of sensitivity of control constants of autopilot with various conditions of ocean environments.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.100-107
• /
• 1998

With the rapid development of Urban Mass Transit in China, the Intelligent Transport System becomes inevitable. Based on the brief introduction of the blueprint of Urban Mass Transit in Shanghai, this paper analyses in detail the components and functions of Automatic Train Control (ATC) system applied in Shanghai Metro, presents the key technology of the main three subsystems of the ATC system : Automatic Train Supervision (ATS) subsystem, Automatic Train Protection (ATP) subsystem, Automatic Train Operation (ATO) subsystem. After reading this paper, you will have an general grasp of ATC system. At the end of the paper, it suggests a good resolution about the ATC system equipment to be made in China. If you are interested in the resolution, we'd like to exchange our thought.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.22-29
• /
• 2022

In this study, an automatic marking system for fabric inspection machines was developed. The main objectives of the study were to promote intelligence and automation for the inspection process, as well as to increase textile industrial productivity. Generally, when a worker manually inspects and marks a fabric, human error and reduced efficiency are unavoidable. To overcome these problems, we developed an automatic marking system that uses robots. This system incorporates a vision camera to automatically recognize defects, and an optical fiber sensor to detect the side of the fabric. To verify the performance, the control system sends a command directly to the robot to mark the fabric. Finally, the actual production confirmed that the proposed system could perform the desired motion.

• 펄프종이기술
• /
• 제37권1호
• /
• pp.73-81
• /
• 2005

Stockigt sizing test, which is readily affected by individual tester's bias as well as testing conditions in recognizing red coloration, had to be modified to improve its reliability and reproducibility. The novel testing system with the automatic recognizing program of red coloration was developed with the auxiliary equipments including an automatic liquid dispenser and a specimen shifter. The analysis program used a hue value of a droplet image in recognizing a point of time on red coloration instead of RGB values that are not similar to human perception of color. Hue was more sensitive in recognizing the red coloration of a droplet than the other two factors, Saturation and Value. During the test, the program records the time consumed up to a specific hue value of a droplet on a specimen. Differently from the conventional test, the automatic test could obtain a reliable and reproducible sizing degree with a minor error. Furthermore, the Stockigt sizing degree measured by the automatic system showed great correlations with contact angle and Hercules sizing degree. It means that such great correlations will contribute to the development of an integrated measuring system capable of predicting contact angle, surface tension, surface energy and Hercules sizing degree of paper and paperboards through the Stbckigt sizing test. It was meaningful to note that the automatic system for Stbckigt sizing test might be able to used to predict contact angle, Hercules and Cobb sizing degree, based upon the high correlation coefficients.

• 한국해양환경ㆍ에너지학회지
• /
• 제2권1호
• /
• pp.90-101
• /
• 1999

본 논문은 선박자동 항로 추적제어기와 자동접이안 제어기를 포함하는 선박자동운항시스템 설계와 관련이 있다. 자동항로 추적제어기의 설계를 위해서는 최적제어기가 사용되었는데 선형화된 선박조종식이 사용되었다. 수치예는 자동항로 추적제어기가 선장이 미리정한 way point를 추적할 수 있음을 보여주고 있다. 자동접이안 제어기의 설계를 위해서는 비중앙화 방식의 제어기가 사용되었다. 자동접이안 제어기는 자동 항로 추적 제어기에 전진속도에 대한 퍼지 로직 제어기가 추가 되어 실현되었다 수치예는 자동접이안 제어기가 성공적으로 사용되었음을 보여준다.