• Journal of the Korean association of regional geographers
• /
• v.20 no.4
• /
• pp.393-408
• /
• 2014

In this study, the spatio-temporal characteristics of summer extreme precipitation events in the Republic of Korea are examined based on the daily precipitation data observed at approximately 360 sites of both Automatic Weather Station (AWS) and Automated Synoptic Observation System (ASOS) networks by the Korea Meteorological Administration for the recent decade(2002~2011). During the summer Changma period(late June~mid July), both the frequency of extreme precipitation events exceeding 80mm of daily precipitation and their decadal maximum values are greatest at most of weather stations. In contrast, during the Changma pause period (late July~early August), these patterns are observed only in the northern regions of Geyeonggi province and western Kangwon province as such patterns are detected around Mt. Sobaek and Mt. Halla as well as in the southern regions of Geyeonggi province and western Kangwon province during the late Changma period (mid August~early September) due to north-south oscillation of the Changma front. Investigation of their regional patterns confirms that not only migration of the Changma front but also topological components in response to the advection of moistures such as elevation and aspect of major mountain ridges are detrimental to spatio-temporal patterns of extreme precipitation events. These results indicate that each local administration needs differentiated strategies to mitigate the potential damages by extreme precipitation events due to the spatiotemporal heterogeneity of their frequency and intensity during each Changma period.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.1
• /
• pp.343-364
• /
• 2021

In this study, as examples of domestic libraries currently using the cloud-based library system, the main characteristics and issues that appeared in the experience of use divided into the processes of introduction, conversion, and operation of each system were investigated, and the results are as follows. First, it is said that new systems were introduced as alternatives to problems caused by the operation of the existing system, and the current products were selected because they were cost-effective. Second, the main issues in the conversion process were data migration work, implementation of existing service functions, and linking problems of internal and external systems in the library. Third, the main advantages identified in the operation process were cost reduction, simple installation and automatic management and maintenance, and convenient use in mobile devices. The main drawbacks were the difficulty of customizing that reflects the characteristics of the library, and the need for stability of the network. The disappeared role of the information technology librarian is the regular system inspection and maintenance support, and various new roles have been suggested. The responses of librarians and users to the new system were generally satisfied rather than dissatisfied.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.39-44
• /
• 1999

High-resolution images are drawn from existing seismic data which were originally obtained by Korea Ocean Research & Development Institute (KORDI) during 1994-1997 for deep seismic studies on the East Sea of Korea. These images are analyzed for mapping Quaternary faults and near-bottom gas pockets. First 12 channels are selected from shot gathers for reprocessing. The processing sequence adopted for high-resolution seismic images comprises data copy, trace editing, true amplitude recovery, common-midpoint sorting, initial muting, prestack deconvolution, bandpass filtering, stacking, highpass filtering, poststack deconvolution, f-x migration, and automatic gain control (AGC). Among these processing steps, predictive deconvolution, highpass filtering, and short window AGC are the most significant in enhancement of resolution. More than 200 Quaternanry faults are interpreted on the migrated sections in the shallow depths beneath the seafloor. Although numerous faults are found mostly at the western continental slope and boundaries of the Ulleung Basin, significant amount of the faults are also indicated within the basin. Many of these faults are believed to be formed with reactivation of basement, from geotectonic activities including volcanism, and often originated in Tertiary, indicating that the tectonic regime of the East Sea might be unstable. Existence of shallow gas pockets casts real hazardous warnings to deep-sea drillings and/or to underwater constructions such as inter-island cables and gas pipelines. On the other hand, discovery of these gas pockets heightens the interests in developing natural resources in the East Sea. Reprocessed seismic sections, however, show no typical seismic characteristics for gas hydrates such as bottom-simulating reflectors in the western continental slope and ocean floor.

• Progress in Medical Physics
• /
• v.17 no.4
• /
• pp.212-223
• /
• 2006

Positional accuracy of the on-board imager (OBI) isocenter with gantry rotation was presented in this paper. Three different type of automatic evaluation methods of discrepancies between therapeutic and OBI isocenter using digital image processing techniques as well as a procedure stated in the customer acceptance procedure (CAP) were applied to check OBI isocenter migration trends. Two kinds of kV x-ray image set obtained at OBI source angle of $0^{\circ},\;90^{\circ},\;180^{\circ},\;270^{\circ}$ and every $10^{\circ}$ and raw projection data for cone-beam CT reconstruction were used for each evaluation method. Efficiencies of the methods were also estimated. If a user needs to obtain an isocenter variation map with full gantry rotation, a method taking OBI image for every $10^{\circ}$ and fitting with 5th order polynomial was appropriate. However for a mere quality assurance (QA) purpose of OBI isocenter accuracy, it was adequate to use only four OBI Images taken at the OBI source angle of $0^{\circ},\;90^{\circ},\;180^{\circ}\;and\;270^{\circ}$. Maximal discrepancy was 0.44 mm which was observed between the OBI source angle of $90^{\circ}\;and\;180^{\circ}$ OBI isocenter accuracy was maintained below 0.5 mm for a year. Proposed QA program may be helpful to Implement a reasonable routine QA of the OBI isocenter accuracy without great efforts.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.496-513
• /
• 2004

This study was carried out to evaluate the performance of sampling and analytical methodology used for the measurement of toxic volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis. Target analytes were 33 compounds including major aromatic compounds such as BTEX, and halogenated compounds. The methodology was investigated with a wide range of different adsorbents which are commercially available and have been frequently adopted for the VOC measurement. A total of 10 adsorbents were tested in this study: 6 carbon-based adsorbents such as Carbotrap, Carbopack B, Carbosieve S-III, Carboxen 1000, Carbotrap C, Activated Charcoal; and 4 polymer-based adsorbents including Tenax, Porapak Q, Chromosorb 102, and Chromosorb 106. The sampling performance was evaluated with respect to the sampling capacity of VOCs with single-adsorbent and multiple-adsorbents methods for standard samples and field samples. As a result, the best adsorbents for single-adsorbent method in the sampling of toxic organic compounds (including benzene, toluene, xylenes etc.) appeared to be Carbotrap, Carbopack B and Tenax TA. On the other hand, Chromosorb 102, Chromosorb 106 and Porapak Q were found to be unsuitable adsorbents for VOC measurement based on thermal desorption method. Multi-adsorbent packings were evaluated with 4 carbon-based adsorbents, which classified by 3 combination sets of double adsorbents and 2 combination sets of triple adsorbents. The results indicated that the most suitable combination for toixc VOC measurements is Carbotrap C with Carbotrap. Multi-sorbents tubes packed with a strong adsorbent such as Carbosieve S-III or Carboxen 1000 were found to be relatively unsuitable for several compounds, not only owing to the effect of migration of adsorbed compounds from weaker adsorbent to stronger adsorbent, but to hydrophobic nature of the adsorbents. Therefore, it should be addressed that selection of a proper adsorbent (or combination of multi sorbents) is extremely important to obtain reliable data for the concentrations of toxic VOCs in indoor and outdoor environments.