• 전기학회논문지P
• /
• 제53권4호
• /
• pp.205-209
• /
• 2004

This research is investigated an energy saving system based on human detecting technique. It saves a lot of energy by automatic switching method of lighting, appliance, and so on. Existence of people on space is detected by infrared ray sensor. If there is not anybody during definite time, then main controller of system sends "power off" signal to lighting switches, and outlets. When people are detected again, turn on lighting switches and outlets. Result of this research is adaptable for classrooms and offices, and great effect of energy saving is expected.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.27-31
• /
• 1998

• 전자공학회논문지
• /
• 제53권1호
• /
• pp.145-152
• /
• 2016

전통적인 조명이 고효율 LED(Light Emitting Diode)로 빠르게 대체되고, 에너지 효율의 극대화를 위한 다양하고 효과적인 조명 제어 기술이 요구되고 있다. 본 논문에서는 LAN(Local Area Network)과 PAN(Personal Area Network) 기반의 유무선 통신기술을 이용하여 다양한 방법으로 LED 조명을 제어 할 수 있는 조명 제어 장치를 설계하고 구현한다. 구현된 장치는 조명 설치의 복잡한 배선 작업과 설치 작업 비용을 절감하고, 필요한 곳만 선택적으로 자동 또는 수동으로 조명을 제어할 수 있도록 제어 장치를 설계하여 전력 소비량을 최소화할 수 있다. 실험을 통해 개발된 LED 조명 제어 장치의 기능이 정상적으로 동작함을 확인하였다.

• 조명전기설비학회논문지
• /
• 제24권6호
• /
• pp.99-106
• /
• 2010

본 논문에서는 조명에너지 사용을 절감하기 위하여 설계된 자동 조명제어시스템에 전력선 통신(PLC : Power Line Communication)과 단문문자서비스(SMS : Short Message Service)를 적용한 개선된 자동 조명제어시스템을 구현하였다. 본 시스템은 자동 조명제어장치와 함께 재실감지센서에 의하여 화재나 침입자 발생 시 경고음 뿐만 아니라 관리자나 사용자에게 경고 메세지를 전송하여 2차 사고를 예방할 수 있도록 설계되어 있다. 또한 본 논문에서는 전력전송을 위하여 설치된 기존의 전력선에 데이터를 실어 보냄으로써 신호선과 전원선의 통합하여 조명 제어를 위하여 사용되는 라인의 수를 획기적으로 줄이는 개선된 자동 조명제어시스템을 제안하였다.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.95-102
• /
• 2014

본 논문에서는 스마트 LED 가로등을 위한 고속 전력선 통신 기반 자동제어 시스템을 제안한다. 제안된 자동제어 시스템은 고속 전력선 통신망을 이용하여 고속 통신 주파수 대역과 가로등 안정기 특성 분석 및 실시간 원격 제어가 가능하도록 전력선 모뎀부와 모니터링부, 가로등 제어부로 구성하였고, KS 도로조명기준의 조명등급 조건에 만족하도록 설계하였다. 제안된 자동제어 시스템은 기존 가로등 시스템의 비교 결과를 통해 PC를 사용하여 소비 전력을 쉽게 모니터링 하였다. 그 결과, LED 가로등 상태 검사 및 원격 제어를 통해 합리적 소비 전력의 유도에 의해 실시간 모니터링 및 관리를 위한 효율적인 운영의 가능성을 확인 하였다. 또한, 전력요금 절감 및 에너지 효율화, 가로등의 차별화/고급화에 대한 기대효과 향상을 증명하였다.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.77-86
• /
• 2005

This paper is about the development of Automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, The punching accuracy is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used fur the sake of cost down instead of using high quality vision systems for the factory automation. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.307-308
• /
• 2006

This paper is about the development of automatic inspection system of welded nuts on Support hinge using machine vision for the improvement of working condition. Until now, projection welding process was performed by operator. Also, inspection of welded nuts is performed manually and recorded by the operator's naked eye. So these processes caused the produce of poorly-made articles. To improve this manual operation, inspection system using machine vision is introduced. Test algorithm, lighting system and program showed good results to the designed inspection system and led to the increment of productivity.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.47-54
• /
• 2019

This study is concerned with the mechanism and structure of an optical microscope and an automatic multi-focus algorithm for automatically selecting sharp images from multiple foci of a cell. To obtain precise cell images quickly, a z-axis actuator with a resolution of $0.1{\mu}m$ was designed to control an optical microscope Moreover, a lighting control system was constructed to select the color and brightness of light that best suit the object being viewed. Cell images are captured by the instrument and the sharpness of each image is determined using Gaussian and Laplacian filters. Next, cubic spline interpolation and peak detection algorithms are applied to automatically find the most vivid points among multiple images of a single object. A cancer cell imaging experiment using propidium iodide staining confirmed that a sharp multipoint image can be obtained using this microscope. The proposed system is expected to save time and effort required to extract suitable cell images and increase the convenience of cell analysis.

• 산업공학
• /
• 제9권1호
• /
• pp.73-82
• /
• 1996

The purpose of this research is to construct real-time image acquisition system for a line-scan inspection system as a computer vision system. To construct the line-scan inspection system, many problem arise. However, problems of image acquisitions using linear CCD are practically studied in this paper. These problems are concerned to proper lighting systems, relations with handling system, camera systems, and impacts due to the noise of environment. These problems are examined separately, and proper configurations for each case are suggested to construct the line-scan image acquisition system.