• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.278-282
• /
• 2001

The purpose of this study is to introduce a new spacer damper for the bundle transmission lines network. It has the special design, the main characteristics and advantage of this new kind of spacer damper. An Existing spacer damper with bolted clamps, although widely used, is a method of connection with certain disadvantage both as regards assembly on the conductor and in the course of time. Even if tightening torque is correctly applied by using bolt with share head or torque wrench during working time, the aeolian vibration could involve untightening during life time, so the cable can move into the Jaws and wire's breakage appear. To salve this problems, France, Japan and other countries had developed a spacer damper with an automatic system through many years. This new spacer damper is an original automatic clamping device (beltless) which does not require special tool for its installation. This device prevents clamp unlocking problems, ensures a simple installation and ensures a reliable-tightening during life time. Therefore, it is necessary to localize this boltless spacer damper with automate clamping device.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.93-96
• /
• 2001

In this paper, we propose a delay-constrained retransmission method to control packet error or loss in common internet. The Delay Regulator(or Jitter Buffer) which is used to control errors caused by unreliable UDP connection, stores received data packets fDr a small amount of time to prevent network jitter from affecting display quality, which causes constant delay. In this paper, we propose a retransmission method to increase efficiency of ARQ(Automatic Repeat reQuest) by using characteristic of delay regulator.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.9 no.13
• /
• pp.33-38
• /
• 1986

Arguments in favor of cyclic servicing, as opposed to random servicing, in connection with machines which stop in a random manner, are not conclusive because hitherto no general formular has been available for calculating the results which may be expected from cyclic servicing. The aim of the following paper is to help in evaluating the cyclic procedure by presenting a formular for calculating the standard efficiency of a group of semi-automatic machines assigned to one operator who will service them on a cyclic pattern.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1212-1215
• /
• 2002

This paper proposes the system that automatically cognizes the external interface cards on control board. This system is proposed by this paper endows with ID to external interface card and cognizes a connection of external interface card. Also this system automatically executes a task for external interface card. This system has an extension of function according to cognize an external interface card and is fast the execution.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.203-216
• /
• 2000

In this paper, we Investigate rationales for feedback adjustment using some techniques associated with automatic process control based on some nonstatioary disturbance models. Feedback-control schemes are often operated so that the nature of the disturbance that is being compensated is concealed and unusual deviations from the target cannot be taken account of. In this connection feedback control schemes is useful to extend the idea of common causes and special causes to such systems. Minimum-cost feedback schemes are discussed for some simple ,but practically interesting ,models.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.592-602
• /
• 1995

Non-grid and grid method are used for modeling the routing region of the automatic routing system. In this study, we develop the automatic routing system by mixing the methods of non-grid and grid to improve the speed of routing. Grid method has a demerit which decreases the automatic routing speed because it is required a lot of memory by the limitation of the size of board and grid, although the electrical and physical elements are insufficient on the PCB, But non-grid is spent gurite less memory than grid method by using a shape-based patterns. Therefore, we used the methods of non-grid and grid altogether in this paper, In the former method, it is attributed to the improvement of speed, the latter one is applied only the connection of the failed routing in the former one, and it performs the complete automatic routing. This system was developed with C＋＋language under the Windows NT environment of IBM 486DX2-66 Computer.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.149-155
• /
• 2004

On this study, a multipurpose operating system was developed to adjust a configuration of a moving path which have no connection with a form of greenhouse. To being performance the multipurpose working system, we have experienced growth quality on the plants in greenhouse. Some of the results are as follows. While watering by the hand spray. the condition of plant was generally no good. It was shown that plant height and leaf area were all high without wind during watering by the automatic spray. The effect to retrain a plant growth was high as a ventilation was strong. The diameter of a plant stem was small without ventilation condition during watering 3 times by automatic spray. The number of leaf was relatively large during 3 times by automatic spray compared to 2 times by automatic spray or hand spray. Growth of plant was fast as the times of spray were large.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.994-1003
• /
• 2009

For Automatic Meter Reading System, good topology of check machines, concentrators, and repeaters in client field is important. Steiner Minimum Tree is a minimum cost tree connecting all given nodes with introducing Steiner points. In this paper, an efficient mechanism allocating and connecting check machines, concentrators and repeaters which are essential elements in automatic meter reading system is proposed, which conducts repeated applications of building approximate Minimum Steiner Trees. In the mechanism, input nodes and Steiner points might correspond to check machine, concentrators or repeaters and edges might do to the connections between them. Therefore, through suitable conversions and processes of them, an efficient network for automatic meter reading system with both wired and wireless communication techniques could be constructed. In our experiment, for 1000 input nodes and 200 max connections per node, the proposed mechanism shortened the length of produced network by 19.1% comparing with the length of Minimum Spanning Tree built by Prim's algorithm.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.64-69
• /
• 2018

Automatic test equipment for field maintenance of aircraft mounted equipment is effective for integrated design when operating a small number of aircraft for special purposes. The integrated automatic test equipment identifies commonly used interfaces and is used for branching or generating routes for each unit under test specific inspection. High-precision signals such as RTD, TC, and analog voltage can cause measurement errors due to conduction resistance during signal branching and connection when generating branches and paths. The measurement error caused by the resistance of the wire leads to a lot of restrictions in designing the equipment to be inspected. In this paper, we propose a method of calibrating highly accurate signals of an integrated automatic inspection equipment that minimizes measurement errors of analog voltage and high - precision signals.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1958-1967
• /
• 2004

This paper describes the method to rapidly fabricate the large-sized physical model with the envelope model size of more than 600 mm${\times}$ 600 mm${\times}$ 600 mm using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology. The fabrication procedure of the large-sized solid shape is as follows: (1) Generation of STL data from 3D scan data using 3D scanner, (2) generation of shell-type STL data by Boolean operation, (3) division of shell-type STL data into several pieces by solid splitting, (4) generation of USL data for each piece with VLM-Slicer, (5) fabrication of each piece by cutting and stacking according to USL data using VLM-ST apparatus, (6) completion of a shell-type prototype by zigzag stacking and assembly for each piece, (7) completion of a 3D solid shape by foam backing, (8) surface finish of a completed 3D solid shape by coating and sanding. In order to examine the applicability of the proposed method, the miniature of the Mount Rushmore Memorial has been fabricated. The envelope model size of the miniature of the Mount Rushmore Memorial is 1,453 mm${\times}$ 760 mm${\times}$ 853 mm in size. From the result of the fabricated miniature of the Mount Rushmore Memorial, it has been shown that the method to fabricate the large object using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology are very fast and efficient.