• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1271-1274
• /
• 1997

The industrial automation market encompasses all aspects of the discrete process in the manufactring industries. Nowadays many manufacturers are increasingly moving to increase plant capacity, and are trying to produce better quality at the lower costs. We have studied a modern projection-automation system to achieve the communication network which makes connection among all of the projection machines and connect them to a central computer. This communication system have to be very flexible and fast. Also we have studied the communication interface for the automatic production system including the hardware elements and the communication software.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.169-171
• /
• 1995

Automatic control equipment in hydro power plant, such as turbine governor or automatic voltage regulator have to act promptly against for variation of power system, so it is necessary to check and test continuously. During last five years, the performance test of automatic control equipment was performed about 20 units of hydro turbine generator. In this process, because it has complex connection and before calibration, signal conditioner was developed as an auxiliary equipment for performance test. It includes function of signal amplifier, transducer, and meters. As a result of use this equipment for electric governor test at soyang-gang hydro power plant, it was possible to find output data equal to old one.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.220-222
• /
• 2005

When a large-scale load or a new generator is connected to power systems, KPX assesses the effect of the connection on power systems to keep security and reliability standards. As the number of connection requests has been increased, KPX is spending much time for technical assessments of the requests. This paper developed an automatic assessment program to reduce analysis time and enhance simulation accuracy. The program is based on IPLAN and. can be applied to both load and generator network connection requests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.632-634
• /
• 2012

In order for the connection to the wireless network from the list of priorities of the wireless AP to AP profile automatic connection by selecting the preferred method to register a profile, which is determined at the time of the change, the user does not respond to the demands of the part. In this study, the frequency of the user's access in accordance with the wireless AP, and by creating a profile, the user needs to meet with regard to network access adaptive research.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.04a
• /
• pp.107-112
• /
• 2007

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.161-166
• /
• 2008

This study is focused on the welding performance of automatic gas pressure welding machine adapted to korean construction site by external appearance investigation. As gas pressure welding is more economical and has good performances compared with other steel bar jointing methods, as arc welding and mechanical joint etc, in Japan, the gas pressure welding is one of the typical connection of steel reinforcement when connecting the D29 and thicker steel bars, But in Korea, gas pressure welding joint method is not widely used caused by the shortage of skilled workers. so to activate the gas pressure welding in Korea, the automatic gas pressure welding machine is developed. In this study, the welding performances of gas pressure welding joint samples using korean automatic gas pressure welding machine are measured by external appearance investigation - blown diameters, blown length, welding face disagreement, central axis eccentric ratio, bending, sag and crack. The results of welding performances on the gas pressure welding joint samples show that samples are satisfied with the standard value regulated in KS D 0244 and JIS Z 3120.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.158-162
• /
• 2010

PSD is automatically opened and closed when subway train arrive on the station. This system was designed to control electric automatic system. These doors will provide passenger safety, energy saving and a good environment in subway. The monitoring and control systems of PSD are configured so that they can be operated in automatic mode in connection with ATO through the composite control panel in the station control room. The objective of this paper is to obtain high reliability that is essential for monitoring and control systems of PSD. The power supply is based on protection circuit using DC power bridge from two UPS. Also, stable communication system consists of CAN communication line redundancy and RF cross protection algorithm. Monitoring state display results show the validity of the proposed high reliability monitoring and control systems of PSD.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.971-974
• /
• 1988

In this study, we designed a model of NC controller with IBM-PC as a host CPU and intelligent servo controller for 2 axes that can be expaned to 4 axes. OS software was developed with C language at the base of mode selection technic for 9 NC operating modes. Servo controller design was based on the application of interpolator IC(3701) and position controller IC(3702) that permits low cost and high performance. For connection of two systems, parallel I/O communication was implemented. Finally, auto interpolation program test was executed for linear and circular paths resulting 1 LSB accuracy.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.49-54
• /
• 1995

Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.114-124
• /
• 2004

In this paper, we present an automatic C source code generation system for DirectShow based multimedia application programming. In this system, C source code is automatically synthesized from the filter connection graph edited with GraphEdit, a utility tool provided with DirectShow SDK package from Microsoft. In traditional DirectShow programming environments, program design and brief testing steps are usually done with GraphEdit tool just by inserting filters and connecting them properly, while actual implementation of the program should be done separately. The filter connection graph information from GraphEdit is used just as a reference in such the implementation step. Therefore, our system which automatically generates C source code directly from the filter connection graph of GraphEdit seems very useful and many programmers can develop DirectShow based multimedia application programs more effectively and quickly using our system. In addition, our system supports more various media stream control functions for the generated application programs than the existing system such as Wizard which supports limited and fixed number of media control functions only. This feature allows more flexibility in the user interface of the generated source program and makes our system more practical for DirectShow based programming.