• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.275-305
• /
• 2009

Marine insurance contracts, which intended to provide indemnity against marine risks upon the payment of price, known as a premium, originated in Northern Italy in the late 12th and early 13th centuries. The law and practice were later introduced into England through the Continent. It is, therefore, quite exact that English and European marine insurance law have common roots. Nevertheless, significant divergences between English and European insurance systems occurred since the late 17th century, mainly due to different approaches adopted by English courts. The rule of warranty in English marine insurance was developed and clarified in the second part of the 18th century by Lord Mansfield, who laid the foundations of the modern English law of marine insurance, and developed different approaches, especially in the field of warranty in marine insurance law. Since the age of Lord Mansfield, English marine insurance law has a unique rule on warranty. This article is, therefore, designed to analyse the overall rule of the rule of warranty in English marine insurance law. The result of analysis are as following. First, warranties are incorporated to serve a very significant function in the law of insurance, that is, confining or determining the scope of the cover agreed by the insurer. From the insurer's point of view, such the function of warranties is crucial, because his liability, agreed on the contract of insurance, largely depend on in, and the warranties, incorporated in the contract play an essential role in assessing the risk. If the warranty is breached, the risk initially agreed is altered and that serves the reason why the insurer is allowed to discharge automatically further liability from the date of breach. Secondly, the term 'warranty' is used to describe a term of the contract in general and insurance contract law, but the breach of which affords different remedies between general contract law and insurance contract law. Thirdly, a express warranty may be in any form of words from which the intention to warrant is to be inferred. An express warranty must be included in, or written upon, the policy, or must be contained in some document incorporated by reference into the policy. It does not matter how this is done. Fourthly, a warranty is a condition precedent to the insurer's liability on the contract, and, therefore, once broken, the insurer automatically ceases to be liable. If the breach pre-dates the attachment of risk, the insurer will never put on risk, whereas if the breach occurs after inception of risk, the insurer remains liable for any losses within the scope of the policy, but has no liability for any subsequent losses. Finally, the requirements on the warranty must be determined in according to the rule of strict construction. As results, it is irrelevant: the reason that a certain warranty is introduced into the contract, whether the warranty is material to the insurer's decision to accept the contract, whether or not the warranty is irrelevant to the risk or a loss, the extent of compliance, that is, whether the requirements on the warranty is complied exactly or substantially, the unreasonableness or hardship of the rule of strict construction, and whether a breach of warranty has been remedied, and the warranty complied with, before loss.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.283-294
• /
• 1996

To operate the automatic devices of manufacturing process more effectively and to solve the needs of the resource sharing, network technology is applied to the unit control devices located in common manufacturing zone and operated by connecting them. This paper introduces deign and test operation of cell system for the management of multivendor PLC by applying to wall paper process based on the manufacturing standardization of CIM. The analysis of designed multivendor PLC group is performed by selecting the parameters such as variation of data packet size and node number of PLC ladder logic program and variation by analyzing the corresponding variation values of token rotation time and waiting time for the system operation. For the method of the analysis,the equation is considering the overhead such as indicated packet service time and transmission safety margin for PLC network connection in M/G/1 queue model,and it is applied to the cell system and PLC group manage-ment for operation .Through the experiment,it is found that the realtime processing is possible with expanded and better result than the resuit obtained by Jayasumana.Browaka with PLC scan time considered,response lower limit of 10-20 msec. data packet size not more than 50 bytes.and the number of nodes less than 40.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2013

BIM can be utilized variously in construction management(CM) in the respect that it helps to manage comprehensively the construction information and make reliable decisions, but the adoption of BIM is insufficient in the CM area. The purpose of this study is to develop work process models and their guides in order to utilize BIM effectively in CM work at construction stage. This study defined BIM functions as 'BIM converting design', 'Model review', 'Data extraction', 'Automatic estimate', '4D simulation', 'Drawing creation', 'Engineering sector linkage analysis' through literature search, and generated CM works applicable to BIM by analyzing the CM work and process. This study developed BIM-based CM work process models by reconstructing the existing work process in connection with BIM function through an analysis on the relationship between BIM function and CM work, and reconstructing the role of each project participants. In order to improve the usefulness of the developed models, guides that described the BIM works of project participants were prepared through interviews and case studies. To validate the utilization of the models, a comparative analysis on the BIM process of precedent studies was also made and a survey was conducted on experts. This study can contribute to increasing the utilization of BIM in the CM area and can be helpful for CM companies to develop an in-house BIM guide. In the future, it will be necessary to make an assessment on the models from a business perspective through case applications and constantly update BIM-based CM work process model in consideration of the expansion of CM work due to the application of BIM.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2006

We suggest a graphical representation of the tension flow in tonal music using a piecewise parametric curve, which is a function of time illustrating the changing degree of tension in a corresponding chord progression. The tension curve can be edited by using conventional curve editing techniques to reharmonize the original music with reflecting the user's demand to control the tension of music. We introduce three different methods to measure the tension of a chord in terms of a specific key, which can be used to represent the tension of the chord numerically. Then, by interpolating the series of numerical tension values, a tension curve is constructed. In this paper, we show the tension curve editing method can be effectively used in several interesting applications: enhancing or weakening the overall feeling of tension in a whole song, the local control of tension in a specific region of music, the progressive transition of tension flow from source to target chord progressions, and natural connection of two songs with maintaining the smoothness of the tension flow. Our work shows the possibility of controlling the perceptual factor (tension) in music by using numerical methods. Most of the computations used in this paper are not expensive so they can be calculated in real time. We think that an interesting application of our method is an interactive modification of tension in background music according to the user's emotion or current scenario in the interactive environments such as games.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.292-294
• /
• 2018

Recently, damage caused by natural disasters such as fire, earthquake, heavy rains and heavy snow is increasing. In addition, traffic accidents due to freezing, fog and fire in tunnels and bridges are frequently occurring. In such a disaster situation, it is very important to take prompt action by the person in charge of managing the facility and area.To this end, a disaster broadcasting system is used, but in the existing system, the broadcasting room and the speaker are connected by a wired connection. Also, the person in charge has to be in the broadcasting room to broadcast, which has a problem of delaying the time. In this paper, we design a disaster broadcasting system using LTE modem. The designed system enables a broadcasting person to make a call to a broadcasting system from anywhere using a cellular phone and a public telephone. Broadcasting via telephone is possible only with the telephone number pre-registered in the system and can be registered / deleted by the administrator. The registered telephone number, incoming voice file, and announcement voice for automatic broadcasting are stored in the system internal SD memory for convenient management. This disaster broadcasting system is expected to contribute to quick and convenient disaster broadcasting.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2010

Objectives : The mechanical properties of Korean electric cupping systems are studied via experimental measurements. The study aimed at establishing the fundamentals of industrialization and systemization of oriental medicine device industry, as well as improving the quality of life for many Koreans. Methods : We reviewed the studies on traditional cupping as well as modern one to fine necessary factors for electric cupping systems. To characterize the mechanical properties of Korean electric cupping systems, we measured the pressure characteristics of commercially available electric cupping system by using an automatic pressure acquisition system and a standard cup. The pumping capability was checked at 40 seconds, and the stability of the suction cup was checked at 600 seconds. We also acquired the noise level of each system in clinical setting. To check the portability of each system, we also measured its physical dimensions. We scrutinized system manuals provided by the system manufacturers. Results : It took less than 5 second to reach the pressure if the connection between the air hose and the vacuum valve of the cupping system was secure. Pressure diminished to no more than 10% for 600s for all systems. Noise levels were 55~70 dB. Increase in pressure was too fast to control for a designated vacuum level except for one product. Conclusions : The Pumping ability of the systems is impressive and reliable. Pressure retention ability of each cup is quite reliable and reproducible. Therefore, their mechanical performances were worthy of recommendation. Some of them had noise level higher than 60 dB and they were bothersome. It was also suggested that the control for low to middle pressure needed to be accomplished by the cupping system.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.69-77
• /
• 2005

The electronic nose (e-nose) has been used in food industry and quality controls in plastic packaging. Recently it finds its applications in medical diagnosis, specifically on detection of diabetes, pulmonary or gastrointestinal problem, or infections by examining odors in the breath or tissues with its odor characterizing ability. Moreover, the use of portable e-nose enables the on-site measurements and analysis of vapors without extra gas-sampling units. This is expected to widen the application of the e-nose in various fields including point-of-care-test or e-health. In this study, a PDA-based portable e-nose was developed using micro-machined gas sensor array and miniaturized electronic interfaces. The rich capacities of the PDA in its computing power and various interfaces are expected to provide the rapid and application specific development of the diagnostic devices, and easy connection to other facilities through information technology (IT) infra. For performance verification of the developed portable e-nose system, Six different vapors were measured using the system. Seven different carbon-black polymer composites were used for the sensor array. The results showed the reproducibility of the measured data and the distinguishable patterns between the vapor species. Additionally, the application of two typical pattern recognition algorithms verified the possibility of the automatic vapor recognition from the portable measurements. These validated the portable e-nose based on PDA developed in this study.

• Journal of KIISE:Software and Applications
• /
• v.31 no.5
• /
• pp.595-604
• /
• 2004

Automatic analysis of concepts or semantic relations from text documents enables not only an efficient acquisition of relevant information, but also a comparison of documents in the concept level. We present a multiple cause model-based approach to text analysis, where latent topics are automatically extracted from document sets and similarity between documents is measured by semantic kernels constructed from the extracted topics. In our approach, a document is assumed to be generated by various combinations of underlying topics. A topic is defined by a set of words that are related to the same topic or cooccur frequently within a document. In a network representing a multiple-cause model, each topic is identified by a group of words having high connection weights from a latent node. In order to facilitate teaming and inferences in multiple-cause models, some approximation methods are required and we utilize an approximation by Helmholtz machines. In an experiment on TDT-2 data set, we extract sets of meaningful words where each set contains some theme-specific terms. Using semantic kernels constructed from latent topics extracted by multiple cause models, we also achieve significant improvements over the basic vector space model in terms of retrieval effectiveness.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.668-675
• /
• 2003

In this paper, we propose an enhanced p-cycle (preconfigured protection cycle) scheme for WDM mesh networks with QoS constraints. In the previous researches on p-cycle, it is assumed that user's connection has a hi-directional connectivity and the same bandwidth on both direction. Therefore it is difficult to apply p-cycle based link protection to uni-directional connections for multicasting or asymmetric broadband multimedia communications with hi-directional connectivity. And it didn't consider QoS of backup path. We enhanced the p-cycles to accomodate uni-directional connections for multicasting or asymmetric bandwidth communications with hi-directional connectivity. And we propose a selection procedure of p-cycle to assure QoS of backup path. We were able to reduce a required backup bandwidth by applying a uni-directional p-cycle concept to asymmetric broadband multimedia communication environment. The proposed p-cycle selection procedure is applied to the U.S. sample network to evaluate whether the configured p-cycles can support QoS constraint of working path and backup path.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.61-83
• /
• 2012

A knowledge map describes the network of related knowledge into the form of a diagram, and therefore underpins the structure of knowledge categorizing and archiving by defining the relationship of the referential navigation between knowledge. The referential navigation between knowledge means the relationship of cross-referencing exhibited when a piece of knowledge is utilized by a user. To understand the contents of the knowledge, a user usually requires additionally information or knowledge related with each other in the relation of cause and effect. This relation can be expanded as the effective connection between knowledge increases, and finally forms the network of knowledge. A network display of knowledge using nodes and links to arrange and to represent the relationship between concepts can provide a more complex knowledge structure than a hierarchical display. Moreover, it can facilitate a user to infer through the links shown on the network. For this reason, building a knowledge map based on the ontology technology has been emphasized to formally as well as objectively describe the knowledge and its relationships. As the necessity to build a knowledge map based on the structure of the ontology has been emphasized, not a few researches have been proposed to fulfill the needs. However, most of those researches to apply the ontology to build the knowledge map just focused on formally expressing knowledge and its relationships with other knowledge to promote the possibility of knowledge reuse. Although many types of knowledge maps based on the structure of the ontology were proposed, no researches have tried to design and implement the referential navigation-enabled knowledge map. This paper addresses a methodology to build the ontology-based knowledge map enabling the referential navigation between knowledge. The ontology-based knowledge map resulted from the proposed methodology can not only express the referential navigation between knowledge but also infer additional relationships among knowledge based on the referential relationships. The most highlighted benefits that can be delivered by applying the ontology technology to the knowledge map include; formal expression about knowledge and its relationships with others, automatic identification of the knowledge network based on the function of self-inference on the referential relationships, and automatic expansion of the knowledge-base designed to categorize and store knowledge according to the network between knowledge. To enable the referential navigation between knowledge included in the knowledge map, and therefore to form the knowledge map in the format of a network, the ontology must describe knowledge according to the relation with the process and task. A process is composed of component tasks, while a task is activated after any required knowledge is inputted. Since the relation of cause and effect between knowledge can be inherently determined by the sequence of tasks, the referential relationship between knowledge can be circuitously implemented if the knowledge is modeled to be one of input or output of each task. To describe the knowledge with respect to related process and task, the Protege-OWL, an editor that enables users to build ontologies for the Semantic Web, is used. An OWL ontology-based knowledge map includes descriptions of classes (process, task, and knowledge), properties (relationships between process and task, task and knowledge), and their instances. Given such an ontology, the OWL formal semantics specifies how to derive its logical consequences, i.e. facts not literally present in the ontology, but entailed by the semantics. Therefore a knowledge network can be automatically formulated based on the defined relationships, and the referential navigation between knowledge is enabled. To verify the validity of the proposed concepts, two real business process-oriented knowledge maps are exemplified: the knowledge map of the process of 'Business Trip Application' and 'Purchase Management'. By applying the 'DL-Query' provided by the Protege-OWL as a plug-in module, the performance of the implemented ontology-based knowledge map has been examined. Two kinds of queries to check whether the knowledge is networked with respect to the referential relations as well as the ontology-based knowledge network can infer further facts that are not literally described were tested. The test results show that not only the referential navigation between knowledge has been correctly realized, but also the additional inference has been accurately performed.