• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.316-321
• /
• 2006

The objective of this study is the developement of real time automatic datalogger using bluetooth modem for safety and maintence of civil construction sites. Automatic measurement system using general wireless modem is studied, and data communication method of between personal computer(or Server) and automatic measurement data is analyzed. Therefore data communication method and analyzing program of automatic measurement data is developed using real time automatic datalogger with bluetooth modem. The results of this study will be using real time automatic measurement of civil construction sites

• International Journal of Railway
• /
• v.2 no.3
• /
• pp.127-130
• /
• 2009

The system improves the safety and efficiency of railway transport, combining the advanced axle-counter with single-track semiautomatic block. Using computer, to accomplish relay-based semiautomatic block logic operation and axle-counter to check section status, it will further increase the performance of railway transport. Safety-related communication is one of the important topics in railway signal system. By referring to relevant safety-related communication standards, to research on safety-related communication of Micro-computer automatic block between Railway Stations System, the thesis introduces the basic requirements, concept model, codes, and the process, etc.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.61-67
• /
• 2018

Automatic Train Stop (ATS) is a device that automatically stops or decelerates a train when the train exceeds the permitted speed limits or violates the signal regulations. The railway signaling system has been evolved to an automatic train control system (ATC), and is being developed into Distance-to-Go and Communication Based on Train Control (CBTC). In spite of that, the ATS system is currently being operated in Seoul Metro (line 1 and 2) and most of railway lines in Korea as well as overseas. In this study, we presents the technical methodology to prevent human errors in order to secure the safety in operation of the ATS system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.171-178
• /
• 2020

Many countries are establishing and operating blended learning that combines the advantages of online and offline education. However, online education lecture-based Mooc courses have a very low level, with a graduation rate of less than 5-10%. Therefore, in order to increase the graduation rate of students taking online Mooc distance education lectures that anyone can easily take lectures anytime, anywhere on the web-based basis, it is necessary to introduce automatic analysis of students' understanding level of lectures and an automatic academic warning system. Moreover, in order to enter an advanced education country, it is necessary to develop an automatic judgment SW for wrong answer rate, automatic summary SW for lectures, and automatic analysis SW education for lecture-based weak subjects based on mixed learning levels. In order to improve this problem, in this paper, we proposed and simulated an automatic summarization system for lecture contents, an automatic warning system for incorrect answers, and an automatic judgment algorithm for weak subjects.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.47.4-47
• /
• 2001

The automatic-driverless operation, a very important technique for metro railways, is necessary for achieving higher safety, greater reliability, and bigger transport capacity. To achieve these things, we have to build up the system design and tasting techniques for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems should interface not only with each other but also between the sub-systems and the signal system on the ground. For the saving of energy, we designed coasting strategy of ATO system, In this paper, we developed ATO system and tested on the test line and ...

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.173-177
• /
• 2000

In this paper new automatic gate system(AC5) which is used fo. non-stop gate entrance of container trucks is developed. The gate entrance imformations are transmitted and received by 5.8GHa dedicated short range communication(DSRC) between roadside equipment(RSE) and on-board equipment(OBE). The conventional systems, such as barcode system and camera identifiation system, are needed for container vehicles to stop at the gate. Here DSRC system and AGS are considered and the AGS and convensional systems are compared.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.172-179
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design iかd testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control md Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.241-249
• /
• 2002

Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super precision technology in sub-micron units is required for optical axis adjustment. We developed the automatic optical fiber by image processing and automatic loading system. we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10{\mu}m$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up and fiber input array and waveguide chip formed in line by automatic.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1451-1453
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on the 7 line that has been developed on the basis of the standardized type EMU for korea railway systems.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.108-115
• /
• 2020

Blended learning is a teaching method utilizing all the advantages in 'on and off-line' learning circumstances in order to enhance the learning effect and efficiency, more than the simple use of online factors in the classroom education. In this paper, we present the realization and simulation of algorithm for the realtime evaluation of low-grade and high-grade subjects in order to implement smart e-learning system, considering a lecture intelligibility. In order to grasp the levels of student's intelligibility, we simulated a function that automatically summarizes the study contents of class given by a lecturer. Especially, in administrator mode of smart e-learning system, we suggested and simulated a system in order to help the lecturer to easily manage the student's grades, and we have provided software to tell the student's intelligibility of lecture, analyzed the rate of incorrect answers, automatic judgment of lecture intelligibility and judge the weakest subject.