• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.145-153
• /
• 2021

Automated Guided Vehicle (AGV) is commonly used in manufacturing plant, warehouse, distribution center, and terminal. AGV is self-driven vehicle used to transport material between workstations in the shop floor without the help of an operator, and AGV includes a material transfer system located on the top and driving system at the bottom to move the vehicle as desired. For navigation, AGV mostly uses lane paths, signal paths or signal beacons. Various predominant sensors are also used in the AGV. However, in the conventional AGV, there is a problem of not turning or damaging nearby objects or AGV in a narrow space. In this paper, a new driving system is proposed to move the vehicle in a narrow space. In the proposed driving system, two sets of the combined steering-drive unit are adopted to solve the above problem. A prototype of AGV with the new driving system is developed for the comparative analysis with the conventional AGV. In addition, the experimental result shows the improved performance of the new driving system in the maximum speed, braking distance and positioning precision tests.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.264-279
• /
• 2021

Most automated vehicle evaluation scenarios are developed based on the typical driving situations that automated vehicles will face. However, various situations occur during actual driving, and sometimes complex judgments are required. This study is to define a situation that requires complex judgment for safer driving of an automated vehicle as a dilemma situation, and to suggest a driving strategy necessary to secure driving safety in each situation. To this end, we defined dilemma situations based on the automated vehicle ethics guidelines, the criteria for recognition of error rate in automobile accidents, and suggestions from the automated vehicle developers. In addition, in the defined dilemma situations, the factors affecting movement for establishing driving strategies were explored, and the priorities of factors affecting driving according to the Road Traffic Act and driving strategies were derived accordingly.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.14-20
• /
• 2020

This paper presents a vehicle mass and road grade estimator for developing an automated bus. To consider the dynamic characteristics of a bus varying with the number of passengers, the longitudinal controller needs the estimation of the vehicle's mass and road grade in real-time and utilizes the information to adjust the control gains. Discrete Kalman filter is applied to estimate the time-varying road grade, and the recursive least squares algorithm is adopted to account for the constant mass estimation. After being implemented in MATLAB/Simulink, the estimators are evaluated with the dynamic model and experimental data of the target bus. The proposed estimators will be applied to complement the algorithm of the longitudinal controller and proceed with algorithm verification.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.199-209
• /
• 2015

This paper presents a model predictive control (MPC) approach to control the steering angle in an autonomous vehicle. In designing a highly automated driving control algorithm, one of the research issues is to cope with probable risky situations for enhancement of safety. While human drivers maneuver the vehicle, they determine the appropriate steering angle and acceleration based on the predictable trajectories of surrounding vehicles. Likewise, it is required that the automated driving control algorithm should determine the desired steering angle and acceleration with the consideration of not only the current states of surrounding vehicles but also their predictable behaviors. Then, in order to guarantee safety to the possible change of traffic situation surrounding the subject vehicle during a finite time-horizon, we define a safe driving envelope with the consideration of probable risky behaviors among the predicted probable behaviors of surrounding vehicles over a finite prediction horizon. For the control of the vehicle while satisfying the safe driving envelope and system constraints over a finite prediction horizon, a MPC approach is used in this research. At each time step, MPC based controller computes the desired steering angle to keep the subject vehicle in the safe driving envelope over a finite prediction horizon. Simulation and experimental tests show the effectiveness of the proposed algorithm.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.88-94
• /
• 2023

The seating postures of passengers in the automated driving vehicle are possible in atypical forms such as rear-facing and lying down. It is necessary to improve devices such as airbags and seat belts to protect occupants from injury in accidents of the automated driving vehicle, and collision safety evaluation tests must be newly developed. The purpose of this study is to define representative types of head-on collision accidents to develop collision standards for autonomous vehicles that take into account changes in driving behavior and occupants' postures. 150 frontal collision cases remained by filtering (accident videos, images, AIS 2+, passenger car, etc…) and random sampling from approximately 320,000 accidents claimed by a major insurance company over the past 5 years. The most frequent accident type is a head-on collision between a vehicle going straight and a vehicle turning left from the opposite side, accounting for 54.7% of all accidents, and most of these accidents occur in permissive left turns. The next most common frontal collision is the center-lane violation by drowsy driving and careless driving, accounting for 21.3% of the total. For the two types above, data such as vehicle speed, contact point/area, and PDOF at the moment of impact are obtained through accident reconstruction using PC-Crash. As a result, two types of autonomous vehicle crash safety test scenarios are proposed: (1) a frontal oblique collision test based on the accident types between a straight vehicle and a left-turning vehicle, and (2) a small overlap collision test based on the head-on accidents of center-lane violation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.40-48
• /
• 2022

An automated material handling system (AMHS) has been emerging as an important factor in the semiconductor wafer manufacturing industry. In general, an automated guided vehicle (AGV) in the Fab's AMHS travels hundreds of miles on guided paths to transport a lot through hundreds of operations. The AMHS aims to transfer wafers while ensuring a short delivery time and high operational reliability. Many linear and analytic approaches have evaluated and improved the performance of the AMHS under a deterministic environment. However, the analytic approaches cannot consider a non-linear, non-convex, and black-box performance measurement of the AMHS owing to the AMHS's complexity and uncertainty. Unexpected vehicle congestion increases the delivery time and deteriorates the Fab's production efficiency. In this study, we propose a Q-Learning based dynamic routing algorithm considering vehicle congestion to reduce the delivery time. The proposed algorithm captures time-variant vehicle traffic and decreases vehicle congestion. Through simulation experiments, we confirm that the proposed algorithm finds an efficient path for the vehicles compared to benchmark algorithms with a reduced mean and decreased standard deviation of the delivery time in the Fab's AMHS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.21-36
• /
• 2015

These days Automated Vehicle(AV) has been receiving attention as a fundamental solution to resolve the various transportation problems and various researches related to the benefits of AV have been done. However, previous researches mainly analyzed the effects in the virtual network. The purpose of this research is to predict and to find out the benefits by introducing the Automated Vehicle to present road traffic system. Thus, the study analyzes the traffic-flow changes of Gyeongbu freeway Seoul-Singal basic section which is planned for setting the test-bed. The results show that Automated Vehicle can have negative effects on the traffic-flow in low volume of LOS A and B. However, the average speed increases and the traffic density decreases in more than LOS C, the traffic volume increase. Therefore, the introduction of Automated Vehicle achieves positive effect on various transportation problems such as the traffic congestion.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.109-118
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV. So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.57-63
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV, So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets,

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.108-114
• /
• 2015

Automated driving systems require a high level of performance regarding environmental perception, especially in urban environments. Today's on-board sensors such as radars or cameras do not reach a satisfying level of development from the point of view of robustness and availability. Thus, map data is often used as an additional data input to support these systems. An accurate digital map is used as a powerful additional sensor. In this paper, we propose a new approach for vehicle localization using a lane map and a single-layer LiDAR. The maps are created beforehand using a highly accurate DGPS and a single-layer LiDAR. A pose estimation of the vehicle was derived from an iterative closest point (ICP) match of LiDAR's intensity data to the lane map, and the estimated pose was used as an observation inside a Kalmanfilter framework. The achieved accuracy of the proposed localization algorithm is evaluated with a highly accurate DGPS to investigate the performance with respect to lateral vehicle control.