• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1915-1919
• /
• 1991

The efficiency of automated assembly line is increased by realizing the automation of each assembly cell, monitoring the line information and developing the real-time line control system it. which production flow is controllable. In this paper, the several modules which are important factors when constructing automated real-time control system, such as, line control S/W module, real-time model change module, error handling module and line production management S/W module, are developed. For developing these important programming modules, real-time control and multi-tasking techniques are integrated. In this paper, operating method of real-time line control in PCB automated assembly line is proposed and for effective control of production line by using multi-tasking technique, proper operating method for relating real-time line control with multi-tasking is proposed by defining the levels of signals and tasks. CIM-Oriented modular programming method considering expandability and flexibility will be added for further research in the future.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.162-165
• /
• 2007

TFT-LCD process has two advantages as compared with the semiconductor-process. It is that cycle time is short and number of the final products are small. But it needs complicated inspection / assembly line to be treated manually and much higher labor costs in the TFT-LCD process. Also, It is necessary to build PICS(Production Information and Control System) which is automated and intelligent. In this paper, an automated process of LCD module assembly line that can increase productivity and reduce the cost of production to strengthen the competitiveness corresponding with global market is planned in comparison with its manual/semi-auto. It is noted that The automated line for COG$\sim$FOG process replacing with the existing facilities had the following effects; the productivity is increased to about 1.5 times and labor cost reduced 85%. In addition, whole assembly line can be short and simple.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.173-185
• /
• 2004

The production using U-shaped line is studied. This research presents the relationship among machining time, cycle time and production rate in a U-shaped line. The U-shaped line produces shafts by automated machines. In this paper when any production rate is given the U-shaped line always satisfies the production rate. An algorithm is developed for the determination of cycle time, the number of machines and workers of the U-shaped line in order to minimize the total machine capacity and the number of workers for any given production rate. The U-shaped line was successfully designed by applying the proposed algorithm.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.132-138
• /
• 2006

With a great requirement of innovation caused by severe competition current companies are encouraged to improve bottleneck areas in production procedure. Specially a chassis line in which assembly processes are mainly carried out manually has the large potential to be automated. The putting of spare tire in trunk in chassis line is still dominated by free dropping method. Through that, parts in trunk such as luggage room lamp, jack and so on were damaged and the complaint of assembler in the next process was occurred due to physical strength. To eliminate these, tile robot system was in this paper developed to place spare tire on the mounting hole in trunk. The movement of robot was synchronized with the velocity of chassis hanger. With this automated system the productivity of the chassis line was increased from the benefits such as simplification of the system using only robot without the mechanically synchronized transport, inserting spare tire into the right position with robot, reduction of damaged parts and production of various type of car.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.169-175
• /
• 2010

Recently, to improve operating efficiency with the higher in-line rate in automated production lines, a lot of cases of grouping machines and material handling system together to form a cluster has shown frequently. This article addresses the job allocation and operation method of automated material handling for cluster-type production systems. First of all, the control problems of the automated material handling systems are classified into the control problem of inter-cluster material handling system and that of intra-cluster material handling system. Then, a distributed agent-based control scheme is proposed for the former, and an operational control procedure for the latter. Simulation experiment shows that the proposed method is efficient in reducing cycle times and improving utilization of material handling vehicles.

• 산업경영시스템학회지
• /
• 제46권1호
• /
• pp.68-75
• /
• 2023

In an automotive plant, an automated storage and retrieval system (ASRS) synchronizes material handling flows from a part production line to an auto-assembly line. The part production line transfers parts on small-/large-sized pallets. The products on pallets are temporarily stored on the ASRS, and the ASRS retrieves the products upon request from the auto-assembly line. Each ASRS aisle is equipped with narrow-/wide-width racks for two pallet sizes. An ASRS aisle with narrow-/wide-width racks improves both storage space utilization and crane utilization while requiring delicate ASRS aisle design, i.e., the locations of the narrow-/wide-width racks in an ASRS aisle, and proper operation policies affect the ASRS performance over demand fluctuations. We focus on operation policies involving a common storage zone using wide-width racks for two pallet sizes and a storage-retrieval job-change for a crane based on assembly-line batch size. We model a discrete-event simulation model and conduct extensive experiments to evaluate operation policies. The simulation results address the best ASRS aisle design and suggest the most effective operation policies for the aisle design.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.262-267
• /
• 2013

This paper describes a vision based automation case study for the tire tread extruder line. To accurately measure the thread widths, two cameras with laser line illumination have been installed near the takeaway conveyer. The overall tread extruder line is then automated by controlling the speeds of take away conveyor and screw motor such that a difference between measured widths and the targeted data is minimized. By doing this, the conventional tread extruder line has been replaced by the developed automated computer system and with only one operator, increasing the production efficiency and reducing safety accidents.

• 한국시뮬레이션학회논문지
• /
• 제22권2호
• /
• pp.93-100
• /
• 2013

다품종 소량생산이 보편화 되면서 하나의 생산라인에서 여러 종류의 제품을 교대로 생산하는 혼류생산방식이 보편화 되었다. 하지만 흐름라인 방식의 혼류생산에서는 필연적으로 작업장 간의 공정시간 불균형이 존재한다. 따라서 이러한 공정불균형에 의한 대기의 낭비를 최소화하기 위하여 기존의 흐름생산방식에서 셀생산방식으로 전환하는 시도가 빈번하게 발생한다. 본 논문에서는 굴삭기 부품을 생산하는 혼류흐름라인 방식의 자동화 로봇 용접라인을 FMC 개념의 직선형 셀방식으로 전환하는 과정에서 타당성 검토를 위해 시뮬레이션을 수행한 사례연구 결과를 소개한다. 분석결과 26.7%의 생산량 증가와 55% 이상의 리드타임 감소효과가 예상되었다. 또한 향후 제품 생산비율의 변화에 따른 민감도분석을 수행하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.850-852
• /
• 2004

The usable output of glassware formation production line depends, among other factors, on the weight and shape of a lump of hot molten glass called a gob. In this paper, an automated image processing system for monitoring gob weight and shape on a production line is proposed. Present techniques often rely on manual weighing of gobs on a sample basis by manually controlling the gob feeder. The proposed automated image monitoring system checks the weight and shape of every free-falling gob before it reaches the mould. In this system, the estimated weight of the gob is sufficiently close to its actual weight.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.286-289
• /
• 2007

We have developed an automated circuit defect inspection and repair method that can be used to improve the yield ratio of TFT-LCD. The method focuses on correcting resist patterns after the development process to ensure shape regularity. We built a prototype system and confirmed that the method is valid.