• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.44-58
• /
• 2017

The inspection for building occupancy authorization has lacked objectivity due to manual measurement methods. This is why connivance of the illegal buildings has been rampant, which has led to so many incidents. Consequently, this law has lost its intent to protect people's lives and property. In this study, for the purpose of improvement of this law, the research was conducted by the utilization of unmanned aerial vehicle for automated inspection for building occupancy authorization. Theoretical considerations about building occupancy authorization and the trend of UAV technology were accomplished. Secondly, a series of reverse engineering was conducted including digital photography, network RTK-VRS surveying and post-processing data. Thirdly, the resultant spatial information was used for building occupancy inspection authorization in a BIM platform and the effectiveness and applicability of UAV-based inspection was analyzed. As a result, methodology for UAV-based automated building occupancy inspection authorization was derived. And it was found that eleven items would be possible to be automated among thirty total items for building occupancy authorization. Also it was found that UAV-based automated inspection could be valid in inspecting building occupancy authorization due to authentic accuracy, effectiveness and applicability with government policy.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.125-130
• /
• 2013

In this paper, in order to overcome shortcomings of manual inspection for the automotive PWM Shaft, we developed an automated inline inspection system. The automated inline inspection system consists of the work feeder unit, conveying unit, outer diameter check unit, run-out and roundness check unit, machine vision, defective separation unit and status alarm unit. We used the machine vision system for automatic inspection process and designed the inline systems for automatic feeding and selecting process. Also the repeated operation test was performed in order to verify the precision and reliability of the proposed automated inline inspection system.

• Journal of Computational Design and Engineering
• /
• 제1권3호
• /
• pp.194-201
• /
• 2014

Optimization of design is an important step in obtaining tissue engineering scaffolds with appropriate shapes and inner micro-structures. Different shapes and sizes of scaffolds are modeled using UGS NX 6.0 software with variable pore sizes. The quality issue we are concerned is the scaffold porosity, which is mainly caused by the fabrication inaccuracies. Bone scaffolds are usually characterized using a scanning electron microscope, but this study presents a new automated inspection and classification technique. Due to many numbers and size variations for the pores, the manual inspection of the fabricated scaffolds tends to be error-prone and costly. Manual inspection also raises the chance of contamination. Thus, non-contact, precise inspection is preferred. In this study, the critical dimensions are automatically measured by the vision camera. The measured data are analyzed to classify the quality characteristics. The automated inspection and classification techniques developed in this study are expected to improve the quality of the fabricated scaffolds and reduce the overall cost of manufacturing.

• 산업공학
• /
• 제9권1호
• /
• pp.63-71
• /
• 1996

A wire harness is an assembly cables and/or wires to transmit signals between electronic assemblies in automobiles and electronic appliances. Inspection of such a wire harness is to check the sequence of assembled cabled each of which is identified by its own color. This paper presents an automated visual inspection system for wire harnesses incorporating back-propagation neural network as a color identification device. The tests performed by using real test specimens show that the inspection system works well enough.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.157-158
• /
• 2019

Reinforcing bars are an important material for tensile strength of structures. For this reason, the inspection of the reinforcing bars confirming the layout and omission is very important for the safety of the structures. However, the current method of inspecting of the reinforcing bars through photographs of specific areas is difficult to identify condition all reinforcing bars. And It is also difficult to confirm after completion of a building. Therefore, reinforcing bar inspection using 3D scanner is required for automation of rebar inspection and database construction. For this purpose, this study test application of automated inspection method for rebar inspection using 3D scanner and discuss the effect of this method.

• 한국멀티미디어학회논문지
• /
• 제12권3호
• /
• pp.397-408
• /
• 2009

영상 학습은 컴퓨터를 이용한 자동 시각 검사에서 매우 중요하고 어려운 문제이다. 최근 생산되는 인쇄회로 기판(PCB : Printed Circuit Board)은 부품의 크기가 작아지고 회로 패턴이 점점 복잡해져서 신제품의 개발 주기가 짧고 다양한 제품들을 검사해야 하는 분야에서 어렵고 복잡한 학습 과정은 큰 문제가 되고 있다. 본 논문은 CAD(Gerber: 거버)파일을 이용하여 PCB 자동 시각 검사의 기준이 되는 참조 영상을 생성하였다. Gerber 파일로 생성된 참조 영상은 결함이 없는 PCB 패턴을 보장한다. 시스템의 구현과 실험을 통하여 Gerber 파일을 이용하여 PCB 자동 시각 검사 시스템의 학습 과정을 손쉽게 할 수 있는 방안을 제시하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.403-404
• /
• 2008

This report described the development of Vision Inspector program which can simulate numerically the image acquisition process of Machine Vision System for automatic optical inspection of any products. The program consists of an illuminator, a product to be inspected, and a camera with image sensor, and the final image obtained by ray tracing.

• 실천공학교육논문지
• /
• 제6권1호
• /
• pp.37-42
• /
• 2014

자동 시각 검사 장비는 전 세계적으로 제조업 기반의 기업들의 공장 자동화 시스템의 주요 장비로 자리 잡고 있다. 반도체, LCD, 철강, 제지 등 다양한 분야에서 품질관리의 자동화를 위하여 필수적으로 활용되고 있다. 그러나 대학, 직업전문학교 등의 교육기관에서는 이에 대한 교육이 거의 이뤄지지 못하고 있다. 본 논문에서는 자동 시각 검사 시스템의 기술훈련을 위하여 라인스캔 카메라 기반의 자동 시각 검사 장비 교육을 위한 실습 장비에 대해서 다루고 있다. 제작된 시스템은 산업현장에 널리 사용되고 있는 X-Y stage 기반으로 구성되었으며, 영상의 픽셀해상도는 $10-30{\mu}m$의 범위에서 가변적으로 조절 가능하다. 또한 조명구조에 따른 영상효과를 확인하기 위하여, 측면 직사조명과 동축조명을 장착하여 활용할 수 있도록 구성되어 있다. 이는 훈련자가 실습환경에서 다양한 조건들을 변경시키며 실습을 수행할 수 있음을 의미하며, 실제 제조 현장에서 활용되는 라인스캔 카메라 기반의 머신비전 시스템과 거의 동일한 기능을 수행하도록 제작되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.82-87
• /
• 1998

Laser printer, faximile and copy machine are a few examples of OA(office automation) system. In such a system, the reflecting mirror has been employed for transmitting a target image to optical device. Therefore, to develope a good quality of optical system, the quality control of optical mirror was required. In recent years, considerable efforts have been directed toward the development of automated optical glass inspection system because the inspection is eye-fatigue and monotonous job for humans to perform. In this paper, we propose a inspection system applying algorithm of image processing for detecting defects of optical glass such as pinhole, scratch. From the experiments, the proposed inspection system shows reliable results.

• 품질경영학회지
• /
• 제23권3호
• /
• pp.33-44
• /
• 1995

This paper presents an automated visual inspection system for the electronic parts manufacturing process. In this system, a statistical process control (SPC) method is integrated into the automated inspection method on a real time base. It shows how the collected data can be analyzed with the SPC to provide process information. Also presented are studies of subpixel image processing technology to improve the accuracy of parts measurements, and the cumulative-sum (CUSUM) control chart for fraction defectives. An application of the developed system to connector manufacturing process as a part of computer integrated manufacturing (CIM) is presented.