• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권1호
• /
• pp.55-59
• /
• 2013

In the oral and maxillofacial area, bone defects are created by various reasons and demand for bone grafts, while dental implant implantation has been increased consistently. To solve these problems, there has been development of autogenous tooth-bone graft material (AutoBT$^{(R)}$, Korea Tooth Bank Co., Korea), and we have collected ground reasons to substitute free autobone graft with this material in clinical use. This autogenous tooth-bone graft material is produced in powder type and block type. Block type is useful in esthetic reconstruction of the defect site and vertical and horizontal augmentation of alveolar bone because this type has high strength value, well maintained shape and is less absorbed. Therefore, the author of this study gained favorable result by grafting the block type autogenous tooth-bone graft material after dental implant implantation on the bone defects of the mandibular molar extraction site. Moreover, the author represents this case with literature review after confirming bone remodeling on the computed tomography image and by histological analysis.

• 구강회복응용과학지
• /
• 제22권2호
• /
• pp.161-171
• /
• 2006

Endosseous implants have restored normal function and dental health to many patients. When implants were introduced as an effective treatment modality, their efficacy was limited by the amount of available bone. Today, various grafting procedures can surgically create bone width and volume. Implants can be placed in more ideal locations for successful prosthetic reconstruction. The use of autogenous bone grafts represents the "gold standard" for bone augmentation procedures. Either intraoral or extraoral sites may be considered for donor sites. Alveolar ridge augmentation using autogenous bone block, can be done during implant placement or staged with implant placement, after bone graft healing. In the staged technique, a better implant positioning and the use of wide diameter implants are possible. Alveolar ridge augmentation using autogenous block graft is a predictable way of treatment, for the atrophic alveolar ridge before implant placement. The cases presented in this article clinically demonstrate the efficacy of using a autogenous block graft in generating effective new bone fill for dental implant placement.

• 대한치과의사협회지
• /
• 제50권6호
• /
• pp.329-338
• /
• 2012

Introduction: The purpose of this study is to evaluate the clinical results of vertical alveolar ridge augmentation using autogenous block bone graft, especially resorption rate, and outcomes of dental implants placed in the grafted site. Patients and Methods: Medical records and radiographs were reviewed. Twenty-seven patients who have been received the autogenous block bone graft which harvested from chin, ramus, and ilium, and the implant installation on 31 areas(22 maxillas and 9 mandibles) were included. Eight implants were installed simultaneously at the time of bone graft in 4 patients, and 65 implants were installed after 4.9 months(range 2~18 months) of autogenous block bone graft in 23 patients. The resorption amount and rate of augmented bone, and the success and survival rates implants were evaluated. Results: Mean height of the augmented block bone was $5.9{\pm}2.3mm$(range from 2.5 to 13.0 mm). Mean follow-up period after block bone graft was 30.4 months(range from 16 to 55 months). Mean resorption of the augmented block bone was $2.0{\pm}1.5mm$ (range from 0.5 to 7.24 mm). The success and survival rates of the implants were 78.1 % and 98.6%, respectively. Conclusion: This study indicates that the autogenous block bone graft is a useful and stable method for alveolar ridge augmentation for dental implant. And more augmentation is needed to compensate the resorption of the grafted bone.

• 대한치과의사협회지
• /
• 제54권5호
• /
• pp.348-355
• /
• 2016

Ideal autogenous or allogenic bone graft materials should provide 1) stabilization of blood clot, 2) scaffolds for cellular proliferation and differentiation, 3) release of osteogenic growth factors, 4) appropriate resorption profile for remodeling of new bone. Teeth, especially dentin, mostly contain hydroxyapatite and type I collagen which are similar to bone, and could be valuable graft material. Clinically teeth are used as calcined or demineralized forms. Demineralized form of dentin can be more effective as a graft material. But a conventional decalcification method takes time and long treatment time may give negative effects to various osteogenic proteins in dentin. Author used a new clinical method to prepare autogenous teeth, which could be grafted into the removal defects immediately after extraction using vacuum ultrasonic system. The process could be finished within two hours regardless of the form (powder, chip or block). Teeth were processed to graft materials in block, chip, or powder types immediately after extraction. It took 120 minutes to prepare block types and 40 minutes to prepare powder. Clinical cases did not show any adverse response and the healing was favorable. Rapid preparation of autogenous teeth with the vacuum ultrasonic system could make the immediate one-day extraction and graft possible.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권5호
• /
• pp.284-289
• /
• 2015

In cases of severe alveolar bone atrophy in the posterior maxillary area, which has only a thin sinus floor, the autogenous tooth bone graft block (ABTB) was used to wrap the implant to enhance its primary stability and osseointegration in the sinus. These cases with four years of clinical follow-up demonstrate the applicability of the ABTB in maxillary sinus membrane elevation to improve the outcomes of implant placement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.570-578
• /
• 2006

A severely atrophic maxilla may disturb the proper implant placement. The various bone graft techniques are required for simultaneous or delayed implantation in the cases of atrophic alveolar ridges. We present 11 consecutive patients treated with simultaneous implantation using the autogenous inlay and/or onlay bone grafts from iliac crest to the floor of the maxillary sinus and the alveolar crest. In the cases of atrophic maxilla, a total 69 implants were simultaneously placed with autogenous iliac bone graft. 40 fixtures were inserted in the sinus floor simultaneously with subantral block bone graft, the other 29 fixtures were placed in the anterior or premolar areas with block or particulate bone graft. The vertical alveolar bone height was measured with Dental CT at the preoperation and 6 months postoperation. Moreover, the implant stability quotients (ISQ) were measured by $Osstell^{TM}$ during second implant surgery at 6 months later of first implantation. All implants were obtained successful osseointegration with the grafted bone. The mean vertical increases were 3.9mm in the anterior ridges and 12.8mm in the posterior ridges. During the second implant surgery, mean ISQ were 62.95 in the anterior ridge and 61.32 in the posterior ridge. We concluded that the simultaneous implantation with autogenous iliac bone graft were stable and available methods for severely atrophic maxilla.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권6호
• /
• pp.462-465
• /
• 2012

Horizontal and vertical ridge augmentation with implant placement was performed, using a block type of autogenous tooth bone graft in a 37-year old male patient. This material was very useful for the case of severe alveolar bone resorption of a single tooth. After 13 months, excellent bony healing was obtained and final restoration was performed successfully.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권4호
• /
• pp.156-160
• /
• 2013

Objectives: Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. Materials and Methods: This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. Results: We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was $49.88{\pm}12.98$ years, and the post-operative follow-up period was $35{\pm}5.31$ months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was $0.12{\pm}0.19$ mm. Therefore, excellent clinical results can be said to have been obtained. Conclusion: Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권6호
• /
• pp.483-489
• /
• 2011

Introduction: This study examined the cumulative resorption of implants placed in a severely atrophic mandible and analyzed the radiologic bone resorption in the marginal bone, after an autogenous bone graft including both block and particulates that had been harvested from the ramus and iliac crest. Materials and Methods: A retrospective study was performed on patients who had bone grafts for augmentation followed by implant installation in the mandible area from 2003 to 2008. Twelve patients (6 men and 6 women) who received 34 implants in the augmented sites were evaluated. Cumulative radiologic resorption around the implants was measured immediately, 3 months, 6 months and 12 months after implant installation surgery. Results: The installed implant in grafted bone showed 0.84 mm marginal bone resorption after 3 months and 50% total cumulative resorption after 1 year. The mean marginal bone resorption around the implant installed in the grafted bone was 0.44 mm after 3 months, 0.52 mm after 1 year, after which it stabilized. The implant survival rate was 97% (failed implant was 1/34). Marginal bone resorption of the installed implant in the autogenous onlay block bone grafts was 0.98 mm after 3 months, which was significantly higher than that of a particulated bone graft (0.74 mm) (P <0.05). Conclusion: An autogenous graft including block type and particulate type is a predictable procedure for the use of dental implants in a severely atrophic mandible. Implant placement in augmented areas show a relatively high survival and minimal bone loss, as revealed by a radiologic evaluation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.166-170
• /
• 2011

Horizontal and vertical ridge augmentation was performed using autogenous tooth bone graft block and powder in 44-year old male patient. Excellent bony healing was obtained 2~4 months after ridge augmentation. Implant treatment was performed successfully.