• Korean Journal of Veterinary Research
• /
• v.35 no.1
• /
• pp.169-177
• /
• 1995

This study was carried out to investigate the effect, range of practice, and propriety for diagnosis of early non-pregnancies and reproductive disorders by dairy cows' milk progesterone analysis used EIA-kit of home products. The results were summarized as follows : 1. During 2 to 6 months after artificial insemination, the results of milk progesterone measurement by Home-kit and Auto ELISA reader-kit with pregnant dairy cows(152 heads) certified by rectal palpation were revealed, in Home-kit, 145 heads(95.4%) of positive reaction, 7 heads(4.6%) of quasi-positive, and 0 heads(0%) of negative among 152 heads and, in Auto ELISA reader-kit, 152 heads(100%) of positive reaction among 152 heads. 2. During 19 to 22 days after artificial insemination, the results of milk progesterone measurement by Home-kit, and thereafrer during 50 to 90 days after that, the results of pregnant test by rectal palpation were summarized as follows : 147 heads(82.1%) among 179 heads of positive reaction by Home-kit and 5 heads(31.3%) among 16 heads of quasi-positive were revealed pregnant cows by rectal palpation, and 42 heads(100%) among 42 heads of negative were non-pregnant. 3. During 19 to 22 days after artificial insemination, the results of milk progesterone measurement by Auto ELISA reader-kit, and thereafrer during 50 to 90 days after that, the results of pregnant test by rectal palpation were summarized as follows : 146 heads(86.9%) among 168 heads of positive reaction by Auto ELISA reader-kit and 6 heads(28.6%) among 21 heads of quasi-positive were revealed pregnant cows by rectal palpation, and 48 heads (100%) among 48 heads of negative were non-pregnant. 4. For the accuracy of the rectal palpation, Home-kit and Auto ELISA reader-kit were used in the cows of ovarian diseases. The results were following : in the cows of reproductive disorders expected negative milk progesterone, the accuracies of rectal palpation were the same 75.5%(40 heads among 53 heads) by Home-kit and Auto ELISA reader-kit, and in the cows of reproductive disorders expected positive milk progesterone, the accuracies of rectal palpation were 82.6%(19 heads among 23 heads) and 91.3%(21 heads among 23 heads) by Home-kit and Auto ELISA reader-kit, respectively, and the general accuracies of rectal palpation were 77.6%(59 heads among 76 heads) and 80.3%(61 heads among 76 heads) by Home-kit and Auto ELISA reader-kit, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2047-2053
• /
• 2008

Auto-ID industries and their services have been improved since decades ago, and radio frequency identification (RFID) has been contributing in many applications. Product management can be the foremost example. In our industrial experiences, RFID in ultra high frequency (UHF) band provides much longer interrogation ranges than that of 13.56MHz; many more applications exist thereby. There should be several interesting and useful ideas on UHF RFID; however, those ideas can be limited due to the inevitable environmental circumstances that restrict the interrogation range in shorten value. This paper discusses the propagation interference among different types of readers (e.g, mobile RFID readers in stationary reader zone) in dense-reader environment. In most cases, UHF RFIDs in Korea will be dependent on the UHF mobile RFIDs. In this sense, the UHF mobile users accidently move into the stationary reader's interrogation zone. This is serious problem. In this paper, we analyze propagation loss and propose the effective channel allocation scheme that can contribute developing less-invasive UHF RFID networks. The simulation and practical measurement process using the commercial CAD tools and measurement equipments are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1225-1229
• /
• 2014

This paper introduces a development of the auto sushi conveyer-belt payment system using UHF RFID dishes. In a sushi bar, instead of counting the number of the finished sushi dishes, sushi dishes with the UHF RFID have been used in the auto payment system to have accuracy and convenience. To recognize each dish, the UHF RFID tag has been designed, and auto-payment system has been developed. The UHF RFID tag under the dish has been recognized by an RFID reader, and the auto RFID payment system shows the total price of the finished dishes based on the color and number of dishes automatically. The performance of the developed UHF RFID tag and auto RFID payment system have been measured and verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.745-753
• /
• 2010

Many studies using RFID which can identify the movement of targeted objects has been conducted actively. In this paper, we propose improved tagging method to check exactly the amount of fish feed by the aquaculture tank in a land-based aquaculture farm and design the RFID feeding system to perform auto feeding history. Also, we implement the prototype system which it includes development program for auto-identification and auto-recording and self-made RFID feeding cart equipped the weight device, RFID reader, control module and display device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2569-2574
• /
• 2013

In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, the reader uses the tag number estimation scheme to determine the number of slots for the next reply round. If errors occur in the estimated number of tags, the identification performances will be degraded due to a lot of collision or idle slots. Therefore, in this paper, we propose an ERPB algorithm that the reader cancels the reply round when it experiences a series of collision or idle slots during the current round. The transmission probability control for the tag is also applied to the proposed algorithm. Through simulations, it is demonstrated that the collision rate for the proposed scheme is about 39% lower than STAC protocol. Therefore, the proposed scheme can achieve faster tag identification time compared with STAC protocol due to the low collision rate.

• Journal of Cardiovascular Imaging
• /
• v.31 no.3
• /
• pp.135-141
• /
• 2023

BACKGROUND: Global longitudinal strain (GLS) is an accurate and reproducible parameter of left ventricular (LV) systolic function which has shown meaningful prognostic value. Fast, user-friendly, and accurate tools are required for its widespread implementation. We aim to compare a novel web-based tool with two established algorithms for strain analysis and test its reproducibility. METHODS: Thirty echocardiographic datasets with focused LV acquisitions were analyzed using three different semi-automated endocardial GLS algorithms by two readers. Analyses were repeated by one reader for the purpose of intra-observer variability. CAAS Qardia (Pie Medical Imaging) was compared with 2DCPA and AutoLV (TomTec). RESULTS: Mean GLS values were -15.0 ± 3.5% from Qardia, -15.3 ± 4.0% from 2DCPA, and -15.2 ± 3.8% from AutoLV. Mean GLS between Qardia and 2DCPA were not statistically different (p = 0.359), with a bias of -0.3%, limits of agreement (LOA) of 3.7%, and an intraclass correlation coefficient (ICC) of 0.88. Mean GLS between Qardia and AutoLV were not statistically different (p = 0.637), with a bias of -0.2%, LOA of 3.4%, and an ICC of 0.89. The coefficient of variation (CV) for intra-observer variability was 4.4% for Qardia, 8.4% 2DCPA, and 7.7% AutoLV. The CV for inter-observer variability was 4.5%, 8.1%, and 8.0%, respectively. CONCLUSIONS: In echocardiographic datasets of good image quality analyzed at an independent core laboratory using a standardized annotation method, a novel web-based tool for GLS analysis showed consistent results when compared with two algorithms of an established platform. Moreover, inter- and intra-observer reproducibility results were excellent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.807-812
• /
• 2015

In RFID system, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred as anti-collision algorithm. In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. In this paper, we propose a STAC/PS algorithm that the PS algorithm is applied in the STAC protocol. Through simulations, it is demonstrated that the collision rate for the proposed algorithm is about 50% lower than STAC protocol. Therefore, the STAC/PS algorithm can achieve faster tag identification speed compared with STAC protocol due to the low collision rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.847-857
• /
• 2007

For the implementation of a RFID system, an anti-collision algorithm is required to identify multiple tags within the range of a RFID Reader. A Bit-by-Bit algorithm is defined by Auto ID Class 0. In this paper, we propose a SBBB(Stack Bit-by-Bit) algorithm. The SBBB algorithm save the collision position and makes a query using the saved data. SBBB improve the efficiency of collision resolution. We show the performance of the SBBB algorithm by simulation. The performance of the proposed algorithm is higher than that of BBB algorithm. Especially, the more each tag bit streams are the duplicate, the higher performance is.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.712-714
• /
• 2016

The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In this paper, we propose a STAC/PS algorithm that the PS algorithm is applied in the STAC protocol. The simulation results show that the STAC/PS algorithm can achieve faster tag identification speed compared with STAC protocol due to the low collision rate.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.96-101
• /
• 2005

Spotlighted as an innovative information technology environment, ubiquitous computing has been actively researched on recently. Especially, domestic and global researches focus on the RFID system, which is being eyed to replace the existing bar-code system. As an essential technology for ubiquitous computing, the RFID system can be applied for various purposes. The security issues of the RFID system focus on how the low-priced tag type could have reasonable price competitiveness. The Auto-ID Center in the U.S. is spearheading the research on distribution service and omni-directional security. As for Japan, the researches on omni-directional security and EPC application are necessary in securing the technology for ubiquitous computing with support from the Ministry of Public Management Home Affairs, Posts, and Telecommunication. In this paper, a method of ensuring the availability of the RFID system service will be presented based on the ubiquitous computing environment with the existing omni-directional security and user-friendly interface. While the existing researches focus on the RF reader system and tag-based security, this paper's suggestion also considers the availability of a sen ice to suggest ways of increasing the practical usage of a low-priced RF tag.