• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.529-538
• /
• 2013

Scattered photons cause blurring and distortions in flash radiography, reducing the accuracy of image reconstruction significantly. The effect of the scattered photons is taken into account and an iterative deduction of the scattered photons is proposed to amend the scattering effect for image restoration. In order to deduct the scattering contribution, the flux of scattered photons is estimated as the sum of two components. The single scattered component is calculated accurately together with the uncollided flux along the characteristic ray, while the multiple scattered component is evaluated using correction coefficients pre-obtained from Monte Carlo simulations.The arbitrary geometry pretreatment and ray tracing are carried out based on the customization of AutoCAD. With the above model, an Iterative Procedure for image restORation code, IPOR, is developed. Numerical results demonstrate that the IPOR code is much more accurate than the direct reconstruction solution without scattering correction and it has a very high computational efficiency.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.88-94
• /
• 2021

Machining operations require the removal of chips to keep the water-soluble cutting oil clean and fresh throughout the operation time. Water-soluble cutting oil for metal processing is diluted using a 3-8% solution in water which is generally replaced every three to six months. This study aims to develop multiple purification devices to efficiently remove fine contaminating particles from water-soluble cutting oil. The 2D concept designs were created using AutoCAD. The designs were drawn using the 3D modelling feature of CATIA. Flow analysis was performed in a bubble purifier using Ansys computational fluid dynamics (CFD). This analysis has aided in improving the design and structure of the device to create the final prototype. Experiments were conducted to check the prototype's performance. Comparisons of the effects of each process variable on the experiment was carried out using ANOVA.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.507-515
• /
• 2015

본 연구는 초음파영상에서 컴퓨터보조진단으로 유방질환의 병변인식률을 알아보고자 6가지 질감특성분석 파라미터(평균밝기, 대조도, 평탄도, 왜곡도, 균일도, 엔트로피) 알고리즘을 제안하였다. 2013년 8월에서 2014년 1월까지 부산소재 대학병원을 내원한 환자 중 영상의학과 전문의의 판독과 세포병리학 진단 결과를 토대로 한 90증례의 유방 초음파영상을 대상으로 하였다. 연구방법은 유방 초음파영상에서 관심영역을 $50{\times}50$ 픽셀 크기로 설정하였으며, 획득된 실험영상(정상, 양성, 악성)에 히스토그램 평활화의 전처리 과정 후 MATLAB을 이용한 질감특성분석 알고리즘의 결과값을 산출하였다. 그 결과 제안된 질감특성분석 파라미터 중 평균밝기, 왜곡도, 균일도, 엔트로피의 정상과 악성의 병변인식률은 100%로 높게 나타났으며. 정상과 양성의 병변인식률은 약 83~96%를 나타내었다. 이러한 결과는 유방질환에서 감별진단의 전처리 단계로 자동진단의 가능성을 나타내며, 향후 제안된 알고리즘의 추가적인 연구와 다양한 임상증례에 대한 신뢰성과 재현성이 제공된다면 컴퓨터보조진단의 실용화기반을 마련할 수 있을 것이고, 다양한 초음파 영상에 대한 적용이 가능할 것으로 사료된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.151-151
• /
• 2017

본 연구는 인력을 이용한 품질검사를 수행하고 있는 현장에서 불량 및 품질에 대한 신뢰성이 떨어지고 있는 현상을 해소하기 위해 자동으로 평면도를 측정하고자 하였다. 설계는 Auto CAD를 이용하였다. 평면도 측정기의 크기는 가로${\times}$세로${\times}$높이를 $1000{\times}600{\times}1800mm$로 하였다. 프레임은 $60{\times}60$ 프로파일을 이용하였고 다른 구성 부품은 SUS304 재질을 이용하였다. 측정대상을 올려놓은 상태에서 녹색 버튼을 누루면 작동되도록 되어 있다. 그림 8은 측정결과를 나타낸 것이다. 측정기는 국내업체인 데바의 모델명 EA-20N의 Air Micrometer을 사용하였으며 측정핀의 위치는 조정이 가능하도록 하였다. 평면도 측정 중 설정치수와 같이 않으면 NG 명령과 함께 부저가 울리도록 프로그램하였다. 불량이 발생하면 그림 8과 같이 나타났다. 불량 측정을 위해 측정부의 결과 값이 나타나며 불량이 발생하면 어느 위치에서 불량이 발생했는지를 알 수 있도록 하였다. 또한 결과 값은 자동으로 저장되도록 하였다. 품질확보를 위해 100EA를 측정한 결과 0.00258, 0.00259, 0.00259, 0.00263, 0.00251, 0.00286, 0.00275의 평균값을 나타냈다. 측정값의 검증은 하이트게이지로 측정한 결과 0.002 이내의 결과를 나타냈다. 따라서 본 평면도 측정기를 이용한다면 생산성 향상이 가능하여 가격경쟁력이 있다고 판단된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.149-149
• /
• 2017

본 논문은 생산라인 자동화를 위한 로봇으로 제조업 시장 확대에 가장 큰 걸림돌이 되는 가격 경쟁력 및 인력난 해소를 위해 설계하였으며 다양한 소재에 대응하기 위해 그리퍼를 교체하여 적용이 되도록 하였다. 자동화를 위한 로봇은 소재의 내외경 가공 및 검사까지 모든 공정이 일괄적으로 이루어 져야하며 LCD 모니터에 생산수량 및 불량률 등의 정보를 실시간으로 나타내어 효율적인 생산계획을 수립할 수 있도록 하였다. 생산라인 자동화를 위해 로봇의 설계는 Auto CAD를 이용하였다. 부품의 가공은 CNC에 적용하기 위해 자동공급장치를 설계하였다. 가공이 완료된 후 측정한 값을 LCD모니터를 통하여 작업자가 알아볼 수 있게 나타냈다. 외경 1은 40.405, 외경2는 32.201, 내경 1은 23.346, 내경 2는 34.302로 나타났다. 측정결과 불량 측정을 위해 측정부의 결과 값이 나타나며 불량이 발생하면 그래프를 이용하여 어떤 부위에서 발생했는지를 알 수 있도록 하였다. 또한 결과 값은 자동으로 저장되도록 하였다. 생산라인 자동화를 위해 100EA를 측정한 결과 외경 1은 40.40438, 외경2는 32.20164, 내경 1은 23.34830 내경 2는 34.30033의 평균값을 나타냈다. 측정값의 검증은 하이트게이지로 측정한 결과 0.003 이내의 결과를 나타냈다. 따라서 본 로봇 자동화 시스템을 적용한다면 생산성 향상 및 불량률 감소가 가능하여 인력대체 및 가격경쟁력이 가능하다고 판단된다.

• 생물정신의학
• /
• 제2권1호
• /
• pp.107-114
• /
• 1995

This study was to investigate the anatomical evidence of anxiety. MRI was used to study 11 patients with panic disorder and 15 patients with complex partial seizure, and 21 controls. The regions of interest in the MRI were measured with computer-assisted planimetry using the AutoCad and digitizer. The following results were obtained ; 1) The mean age was 49.7(12.4) years in patients with panic disorder and 30.1(7.5) years in patients with complex partial seizure. 2) There were na signi ficant differences between 3 groups in the values of cerebral area, temporal lobe, caudate nucleus, hippocampus, parahippocampus, amygdala, third ventricle and VBR. The right parahippocampal region which attracted most attention in neurobiological studies regarding anxiety, tended to be larger in both study groups compared to the control group, but with no statistical significance. 3) There was lett-right reversal of temporal lobes in both study groups. And these are mainly due to asymmetrical increase in area of the temporal lobe on right side. These results suggest that temporal lobe, especially right temporal, is the anatomical correspondence of anxiety and functional activation of temporo-limbic system may be accompanied by the structural change of temporal lobe.

• 한국의류학회지
• /
• 제31권5호
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• 생물정신의학
• /
• 제4권1호
• /
• pp.74-83
• /
• 1997

With increasing tendency of incidence and interest for the late onset schzophrenia, concerns about whether this disorder is etiologically or phenomenogically distinctive entity or not have increased also. To clarify the disease entity of the late onset schzophrenia and the role of structural brain changes in its etiology, authors tried to prove following hypothesis : Are there any evidences of structural brain changes in the lateonset schizophrenia? ; If present, are they not different from those of the early-onset schizophrenia or progressive schizophrenia? ; And are they not different from those of senile dementia? Subjects were 6 patients with the late-onset schizophrenia, 6 patients with the early-onset schizophrenia, 6 patients with progressive schizophrenia, 6 patients with Alzheimer's dementia, and 6 controls. We measured regions of interest of the magnetic resonance images by computer assisted planimetry using the AutoCad and digitizer. Our study results may suggest that the third ventricular enlargement and a reversal of normal difference between left and right temporal lobe and left-right difference in posterior lateral ventricle are common brain pathology for all types of schizophrenia including the late onset schzophrenia. And also suggest that brain structural changes of the late onset schizophrenia are related with neurodevelopmental abnormality rather than degenerative change.

• 한국주거학회논문집
• /
• 제22권1호
• /
• pp.95-104
• /
• 2011

The drawings that currently possessing by the Jangseogak Library, The Academy of Korean Studies is the material which were drawn the figure of house in Seoul (Hanseong-bu), during from the middle part of 17th Century to the end of 19th Century. Since these drawings were drawn in the form of Gangado (間架圖), the layout and floor plan, the function of room of each houses can be examined. Focusing on drawings on which the room name was written among those drawings, this Study has researched about the scale and space composition by each domains of the upper-class housing in Seoul, during the latter part of the Joseon Dynasty. Based on the originals, all of the drawings were redrawn using AutoCAD 2008, and the scale of site and building, the occupying area by domains were also analyzed, compared. As the result, it was investigated that the most part of upper-class housing in Seoul had far exceeded over the control limitation about the site size and the building scale in accordance with the status. Furthermore, in this Study, by means of concretely research on the space and room composition of each ranges of the upper-class housing in Seoul, it was quite examinable on the architectural figure of the upper-class housing in Seoul, During the latter part of the Joseon Dynasty, which was not known well in the meanwhile.

• 한국조경학회지
• /
• 제33권4호
• /
• pp.33-44
• /
• 2005

In order to reveal the geographical landscape's features of the East Sea-gateway(東海口), which has existed only in the era of Shilla as unique east path, we have carried out analysis of the old maps(邑誌圖) and satellite imagery, and geographical features analysis in the application of digital maps, and the result is as follows. 1. Analysis of materials from the Chosun dynasty describes landscapes called sea gates(海口) (note that this should not be capitalized); a place where the river meets the sea and the sea comes far into the land. Sea gate landscapes may have an island, but this is not a prerequisite. 2. According to the satellite imagery, the capital city of Shilla Dynasty had five passages. four or them are broad corridors, but one of them is narrow. The east side of the capital city is blocked by mountains and there was an important path which leads into the East Sea. 3. According to the cross section of the mountains, there is the only rule East-path. There was no alternative way. There was only one way-out to the east side from the capital city. This is the unique path which reaches a length of 28km. Judging from this, it seems that this path was called the East Sea-gateway. 4. The landscape of the East Sea-gateway was shaped like the letter 'V' and reached to the landscape of the sea gate. However, the route was blocked - part by the mountains, and also the part in the crisis of loss of path-landscape which has lost its own character of closure as several valleys are merged together.