• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1376-1378
• /
• 2002

Compare and examined Full Auto Line of PV module Manufacture Equipment and PV module Manufacture Equipment in the Korea. Full Auto Line has been constructed with Cell Selection. Tabbing & Stringing. Module Setting, Lamination, Curing and Module Testing, and Module Manufacture Line in the Korea has been constructed with Tabbing & Stringing. Module Setting, Lamination and Module Testing. Laminator's temperature Control is the most important Variable in Manufacture of PV module. Temperature Transformation of Center part of PV module is most high at Lamination, and Edge part is most low.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.85-92
• /
• 2009

본 논문은 차동식스포트형열감지기 현장점검용 표준화기기 개발에 관한 연구이다. 현재 소방점검 시 차동식스포트형열감지기의 성능확인을 위해 사용되는 점검기기(4 Type)들을 실험대상으로 선정하여 문제점을 찾고, 도출된 문제점을 바탕으로 차동식스포트형열감지기 형식승인 시 감도시험기준과 동일한 온도조건인 실온보다 $30^{\circ}C$ 높은 온도로 자동설정 할 수 있고 설정된 온도를 계속 유지할 수 있는 기능과 풍속 조건인 풍속 85cm/s를 유지할 수 있는 차동식스포트형열감지기 현장점검용 표준화기기의 회로를 설계하고 시제품을 제작하였다. 개발된 시제품의 성능확인 결과 차동식스포트형열감지기의 형식승인시험 시 감도시험조건과 동일한 성능이 나타나는 것을 확인하였다.

• 핵의학기술
• /
• 제13권3호
• /
• pp.147-151
• /
• 2009

Purpose: 2-[$^{18}F$]Fluoro-2-deoxy-D-glucose ([$^{18}F$]FDG) particularly plays as a important role in Positron Emission Tomography (PET) imaging in nuclear medicine. Domestic [$^{18}F$]FDG auto synthesizers are installed in Seoul National University Bundang Hospital (SNUBH) at June 2008, these modules were known that it's synthetic yields were guaranteed in average $45{\pm}5%$ so far. To improve yields and convenience of domestic [$^{18}F$]FDG auto synthesizer, numerous trials in reaction time, base concentration, pressure and temperature were performed to increase [$^{18}F$]FDG yields. Materials and Methods: Several synthetic factors (temperature, time and pressure) and shortcoming were corrected based on many evaporation test. Syringe dispensing of tetra-butylammonium bicarbonate (TBAB) was replaced with micro pipette to prepare tetrabutyl ammonium fluoride salt ([$^{18}F$]TBAF). Troublesome refill of liquid nitrogen every 2 hours which was used to protect vacuum system was changed to charcoal cartridge, base guard filter. To monitor the volume of delivered $[^{18}O]OH_2$ from cyclotron by surveillance camera, we set up the volumetric vial on the cover of the module. In addition to, the recovery vial was added in [$^{18}F$]FDG production system to recover [$^{18}F$]FDG loss due to the leak of valve ($V_{13,14}$) in [$^{18}F$]FDG purification process. Results: When we used micro pipette for adding TBAB ($30\;{\mu}L$ in 12% $H_2O$ in acetonitrile), this quantitative dispensation has enabled to improve $5.5{\pm}1.7%$ residual fluorine-18 activity in fluorine separation cartridge compared to syringe adding. Besides, the synthetic yields of [$^{18}F$]FDG has increased $58{\pm}2.6%$ (n=19), $58{\pm}2.9%$ (n=14), $60%{\pm}2.5%$ (n=17) for 3 months. The life cycle of charcoal cartridge and base vacuum was 3 months prior to filling liquid nitrogen every 2 hours and additional side separator can prevent pump corrosion by organic solvent. After setting of volumetric indicator vial, the operator can easily monitor the total volume of irradiated $[^{18}O]OH_2$ from cyclotron. The recovery vial can be used for the stabilizer when an irregular [$^{18}F$]FDG loss was generated by the leak of valves ($V_{13,14}$). Conclusions: We has optimized appropriate synthetic conditions (temperature, time, pressure) in domestic [$^{18}F$]FDG auto synthesizer. In addition to, the remodeling with several accessories improve yields of domestic [$^{18}F$]FDG auto synthesizer with reliable reproducibility.

• 한국수자원학회논문집
• /
• 제57권9호
• /
• pp.615-626
• /
• 2024

본 연구에서는 우리나라 전역에 대해 정확하고 시간 및 비용 효율적으로 토양수분 모니터링을 수행하기 위해 클라우드 컴퓨팅 플랫폼 Google Earth Engine (GEE)와 자동화기계학습(Automated Machine Learning, AutoML)을 결합한 토양수분 산정모형을 개발하였다. Terra MODIS (Moderate Resolution Imaging Spectroradiometer), 전구 강수 관측 위성 GPM (Global Precipitation Measurement)을 기반으로 다양한 공간정보를 활용해 최적의 입력 자료 조합을 테스트하였다. 그 결과, GPM 기반의 무강우누적일수 및 5일 평균강수량, NDVI (Normalized Difference Vegetation Index)와 밤 및 낮시간에 촬영된 LST (Land Surface Temperature)의 합계, 토양특성(사토 및 점토 함량, 용적밀도), 지형자료(고도 및 경사도), 계절 구분이 변수중요도(Feature importance)가 높은 것으로 나타났다. 상기 자료의 조합을 AutoML 통해 목적함수 (Determination of coefficient, R² ; Root Mean Square Error, RMSE; Mean Absolute Percent Error, MAPE)를 설정 후 기계학습 기법별 비교평가를 수행한 결과, Tree 계열의 모형이 높은 성능을 보였으며, 그 중, Random Forest의 성능이 가장 우수하였다(R² : 0.72, RMSE: 2.70 vol%, MAPE: 0.14).

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.155-158
• /
• 2003

Orbital GTA welding is used in the pressure pipe line of auto-mobile, LNG and plant piping. To weld the pipe line safely, to some extent, the back bead must be formed in the root pass. In the plate welding the back bead can be observed, but in the pipe welding, the back bead can not be observed directly. In the welding around circumference, the parameters such as gravity, surface tension and arc force are different at each position. And then D/B for welding condition at each position are required. We also studied about the setting of the optimum orbital welding condition by controlling heat input.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.397-398
• /
• 2006

In late years, from a trend for ecology of auto motive engine, low emission and low fuel consumption of engine become a social assignment. At the same time, the high output (high efficiency) is required, too. In order to meet those requirements, in comparison with conventional engines, lean A/F (Air fuel ratio) setting is becoming popular for the high performance engines of late years. Exhaust valve seat (sintered material) used in these engines has a problem in wear resistance, because it is exposed to the surroundings that is clean and a high temperature in comparison with the conventional engines. Therefore, wear mechanism with lean A/F of engine was analyzed.The exhaust valve seat (sintered material), that was superior in wear resistance, was developed.

• 농업생명과학연구
• /
• 제46권1호
• /
• pp.195-206
• /
• 2012

본 연구는 주간동안 온실 내에서 발생되는 잉여 태양에너지의 적정 축열 시스템 설계에 필요한 기초자료를 제공할 목적으로 확보한 표준기상년 데이터를 이용하여 설정온도별로 잉여 태양에너지를 분석하였다. 주야간 설정온도를 단계별로 증가($15{\sim}19^{\circ}C$)시킨 경우, 온실형태와 지역별로 잉여 태양에너지는 0.2~6.9%정도 증가하여 그 증가폭은 미미하지만 다소 완만히 증가함을 알 수 있었다. 그리고 소요 난방에너지는 29.7~50.0%정도 증가하여 잉여 태양에너지의 증가율 보다 훨씬 큰 폭으로 증가하는 것을 알 수 있었다. 환기 설정온도를 단계별로 증가 (저속 $25{\sim}29^{\circ}C$, 고속 $27{\sim}31^{\circ}C$)시킨 경우, 자동화 온실은 지역별로 잉여 태양에너지는 9.9~35.6%정도로 감소하는 것으로 나타났다. 그리고 단동형 온실은 지역별로 5.1~13.4%정도로 감소하는 것으로 나타나 자동화 온실에 비해 감소의 폭이 상대적으로 작았다. 또한 소요 난방에너지는 온실형태 및 지역별로 다소 증가하거나 감소하는 경우도 있었지만, 그 영향은 아주 미미한 것으로 나타났다.