• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.2
• /
• pp.211-220
• /
• 1997

This study was investigated about preparation of ice at home and developing points which met consumer's demand that was focused on auto icemaker. According to purposive quota sampling method, residences in Seoul and Kyunggi-do area were selected and interviewed by trained interviewer at August 1995. The results were as follows: 66.3% of respondent usually prepared ice in ice-making container of refrigerator and used when they needed. 85% of them used ice in summer and seldomly used in other seasons. Boiling water with barley was major drinking water(45.6%), and broiled or purified tap water was used to make ice(38.6%) commonly. Numbers of ice-making container were two(66.0%). Above 50% of respondents replied that they felt off-flavor in ice usually. After felt off-flavor, 54.7% of respondent threw away the ice, some of them used off-flavored ice after treatment to washing with water. 64.9% of respondents thought that the origins of off-flavor was the flavor of refrigerator itself. The consumer's expectation of developing points were as follows. The most priority of developing points was to make ice quickly, the next was to develop auto ice maker and ice storage container, to make different size of ice. Less expected points were to make more clear ice and large volume of ice in one time. The recognition about auto ice maker was slightly low(35% of respondents), but 67% of them wanted to develop auto ice maker.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.141-148
• /
• 2013

The CT examination sometimes fail to localize the cerebral hemorrhage part depending on the seriousness and may embarrass the pathologist if he/she is not trained enough for emergencies. Therefore, an assisting role is necessary for examination, automatic and quick detection of the cerebral hemorrhage part, and supply of the quantitative information in emergencies. the computer based automatic detection and recognition system may be of a great service to the bleeding part detection. As a result of this research, we succeeded not only in automatic detection of the cerebral hemorrhage part by grafting threshold value handling, morphological operation, and roundness calculation onto the bleeding part but also in development of the PCA based classifier to screen any wrong choice in the detection candidate group. We think if we apply the new developed system to the cerebral hemorrhage patient in his critical condition, it will be very valuable data to the medical team for operation planning.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.35-43
• /
• 2023

Emotion recognition while driving is an essential task to prevent accidents. Furthermore, in the era of autonomous driving, automobiles are the subject of mobility, requiring more emotional communication with drivers, and the emotion recognition market is gradually spreading. Accordingly, in this research plan, the driver's emotions are classified into seven categories using psychological and behavioral data, which are relatively easy to collect. The latent vectors extracted through the auto-encoder model were also used as features in this classification model, confirming that this affected performance improvement. Furthermore, it also confirmed that the performance was improved when using the framework presented in this paper compared to when the existing EEG data were included. Finally, 81% of the driver's emotion classification accuracy and 80% of F1-Score were achieved only through psychological, personal information, and behavioral data.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1147-1154
• /
• 2011

Auto exposure (AE) in image signal processor (ISP) controls brightness of input image to the proper brightness when it is too dark or bright. But conventional AEs often fail to get proper brightness since AE controls only average brightness of image. Especially in applications that require object recognition, it cannot be solved the problem by AE of ISP. In this paper proposes Histogram Equalization (HE) processes that is the alternative of AE. It also proposes proper method to realize hardware and compensate HE problems conventional by using simple calculation.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.151-160
• /
• 2024

Artificial Neural Networks that enabled Artificial Intelligence are being used in many fields. However, the application to mechanical structures has several problems and research is incomplete. One of the problems is that it is difficult to secure a large amount of data necessary for learning Artificial Neural Networks. In particular, it is important to detect and recognize external forces and forces for safety working and accident prevention of mechanical structures. This study examined the possibility by applying the Current Neural Network of Artificial Neural Networks to detect and recognize the load on the machine. Tens of thousands of data are required for general learning of Recurrent Neural Networks, and to secure large amounts of data, this paper derives load data from ANSYS structural analysis results and applies a stacked auto-encoder technique to secure the amount of data that can be learned. The usefulness of Stacked Auto-Encoder data was examined by comparing Stacked Auto-Encoder data and ANSYS data. In addition, in order to improve the accuracy of detection and recognition of load data with a Recurrent Neural Network, the optimal conditions are proposed by investigating the effects of related functions.

• Journal of Korea Multimedia Society
• /
• v.12 no.6
• /
• pp.794-803
• /
• 2009

In this paper, we will present a container auto-landing system, the system use the stereo camera to measure the container depth information. And the container region can be detected by using its hough line feature. In the line feature detection algorithm, we will detect the parallel lines and perpendicular lines which compose the rectangle region. Among all the candidate regions, we can select the region with the same aspect-ratio to the container. The region will be the detected container region. After having the object on both left and right images, we can estimate the distance from camera to object and container dimension. Then all the detect dimension information and depth inform will be applied to reconstruct the virtual environment of crane which will be introduce in this paper. Through the simulation result, we can know that, the container detection rate achieve to 97% with simple background. And the estimation algorithm can get a more accuracy result with a far distance than the near distance.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.27-32
• /
• 2012

Recently, in order to reduce traffic accident related fatalities, increasing number of studies are conducted regarding the vehicle safety enhancement devices. But very few studies about test procedures and requirements for vehicle safety systems are being carried out. Since BSD, as one of the most important safety features, is installed on a new vehicle, its performance test method has to be evaluated. Independent factors irrelevant to the device types including collision position, vehicle speed and closing speed are used to calculate test distance away from the current vehicle. Effect of roadway geometry as radius of curvature is introduced to propose possible misjudgement of following vehicle as adjacent one. The study results would be utilized to enhance the test procedure of BSD performance.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.114-125
• /
• 1997

This paper presents a method that automatically recognizes dimension sets from the mechanical drawings, and that classifies 6 types dimension sets according to functional purpose. In the proposed method, the object and closed-loop symbols are separated from the character-free drawings. Then object lines and interpretation lines are vectorized. And, after recognizing dimension sets(consistings of arrowhead, shape line, tail lines, extension lines, text-string, and feature control frame), we classify recognized dimension sets as horizontal, vertical, angular, diametral, radial, and leader dimension sets. Finally the proposed method converts classified dimension sets into AutoCAD data by using AutoLisp language. By using the methods of geometric modeling, the proposed method readily recognized and classifies dimension sets from complex drawings. Experimetnal results are presented, which are obtained by applying the proposed method to drawings drawn in compliance with the KS drafting standard.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.527-532
• /
• 2001

In this paper, we will propose the new method that estimates the sensing ability of HH smart sensor. We have developed a new signal processing method that can distinguish among different materials relatively. The HH smart sensor was developed for recognition of materials. We made the HH smart sensor in our experiment. Then, we estimated the ability to recognize objects according to acceleration value. We estimated the sensing ability of HH smart sensor with the $R_{SAI}$ method. Experiments and analysis were executed to estimate the ability to recognize objects according to acceleration value changing. Dynamic characteristics of HH smart sensor were evaluated relatively through a new $R_{SAI}$ method that uses the power spectrum density. Applications of this method are for finding abnormal conditions of objects (auto-manufacturing), feeling of objects (medical product), robotics, safety diagnosis of structure, etc.