• Journal of Acupuncture Research
• /
• v.29 no.4
• /
• pp.35-42
• /
• 2012

Objectives : This study was to observe clinical application of auto-microneedle therapy system (AMTS) in patients with peripheral facial paralysis. Methods : 27 peripheral facial paralysis patients were observed after taking AMTS at Facial Palsy Center, Kyung Hee University Oriental Medicine Hospital from March 1, 2011 to January 9, 2012. We assessed the symptoms of facial paralysis with Yanagihara unweighted grading system, Sunnybrook facial grading system(SBGS) and facial disability index(FDI), and observed adverse events and total safety of the treatment. Results : The scores of facial palsy scales increased after AMTS in Yanagihara grading system and Sunnybrook facial grading system. AMTS-related adverse events were mild pain(5.9%) and fatigue(3.5%), which needed no extra treatment. The total safety evaluation was between 'safe' and 'nearly safe' level. There were no other serious adverse events. In addition, patients were satisfied with subjective improvement including facial tingling and numbness. Conclusions : AMTS can be applied as an adjunctive treatment for patients with peripheral facial paralysis due to its safety and clinical usefulness. It is easier to stimulate wide skin area in a short time. Further clinical research is required to investigate the effectiveness of ATMS in a more rigorous RCTs.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.174-183
• /
• 2014

Purpose: A robust, efficient auto-grading computer vision system for meat carcasses is in high demand by researchers all over the world. In this paper, we discuss our study, in which we developed a system to speed up line processing and provide reliable results for pork grading, comparing the results of our algorithms with visual human subjectivity measurements. Methods: We differentiated fat and lean using an entropic correlation algorithm. We also developed a self-designed robust segmentation algorithm that successfully segmented several porkcut samples; this algorithm can help to eliminate the current issues associated with autothresholding. Results: In this study, we carefully considered the key step of autoextracting lean tissue. We introduced a self-proposed scheme and implemented it in over 200 pork-cut samples. The accuracy and computation time were acceptable, showing excellent potential for use in online commercial systems. Conclusions: This paper summarizes the main results reported in recent application studies, which include modifying and smoothing the lean area of pork-cut sections of commercial fresh pork by human experts for an auto-grading process. The developed algorithms were implemented in a prototype mobile processing unit, which can be implemented at the pork processing site.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.453-461
• /
• 1991

The purpose of this research was to develop an automatic design with dialogue function in computer for pants pattern making. AutoCAD including AutoLISP was the programable software package, so AutoCAD were used basically for this research. The conclusions were like these; 1. Dialogue functions of computer allowed the designer to choose emotional elements. 2. The coordinate points needed in drafting for women's pants pattern making were suggest-ed by numerical fomula. So, if the input data of body sizes needed were used, pants patterns for person were automatically obtained as the output. 3. The several curvature parts were presented by using exponent function and the arc drawing of AutoCAD and the degree of bends were to be selected by choosing the simple parameter of algebraic function and arc AutoCAD command. 4. The program permited pattern manipulation and pattern grading of five standard sizes were presented. Also its flow chart by AutoLISP with dialogue function were presented.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.26 no.4
• /
• pp.127-134
• /
• 2013

Objective : Acne is very common disease, it can leave permanent scars. However, there are few reports about it in oriental medicine academia. This study performed to evaluate the effect of reconstruction of skin scars and auto microneedle therapy system on acne scars. Methods : Six patients were treated by using reconstruction of skin scars and auto microneedle therapy system. We compared the degree of treatment of acne scars on pre and post case photos and Qualitative Global Acne Scarring Grading System(QGASC). Satisfaction degree were asked from the patients. Results & Conclusion : After comparing case photos and QGASC, observing patients satisfaction, it can be considered that reconstruction of skin scars and auto microneedle therapy system to be valid acne scars treatment.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1010-1019
• /
• 2006

CAD system is a very important technology in designing the products which we are using today. This CAD technology has been enlarging its area into 3D CAD systems with the development of computer graphics technologies. In particular, such advances have been realized in special area such as the CAD system for designing shoes. However, because it is difficult to design a 3D CAD system, most CAD developments except for major CAD software companies usually have employed the AutoCAD which realizes 3D concepts. Also, many shoes' designers have been skilled with 2D shoe CAD systems and then they can make high achievements. Therefore, we design a new shoe CAD system with advantages of 2D CAD system and 3D CAD system. We also implement the scheme to transfer the data between 2D CAD system and 3D CAD system and also grading technologies to get patterns of various shoes size from a basic shoe's design.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.379-385
• /
• 2018

Purpose: Postharvest handling of onions (harvesting, cleaning, grading, cooling, storing, and transport) should be performed continually to reduce costs and improve quality. The purpose of this study is to a) determine the design parameters and operating conditions of anion auto-dumping that constitutes a key component of the postharvest bulk handling machinery system, and b) to perform a performance test with the auto-dump prototype system. Methods: Kinematic analyses and computer simulations of the auto-dump mechanism were applied to analyze the operating conditions and design parameters. Results: The optimum working condition for the auto-dump was determined from kinetic analyses. In addition, the interaction between the velocity of the hydraulic cylinder and the angular velocity of the auto-dump were analyzed in order to control the bulk handling machinery system. The acting forces and optimum operating conditions of the hydraulic cylinder were determined by analyzing the forces related to the mass of inertia of the auto-dump assembly during rotation. The method of controlling the feeding rate of onions in terms of the uniformity of the stacking pattern and the control of the entire system was better than the two-stage method of controlling the rotational speed of the auto-dump. Based on the performance test with the prototype for the auto-dump, the stacking pattern and rigidity of the system were analyzed. Conclusions: These results would be of great importance in the postharvest bulk handling machinery system for onions.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.332-344
• /
• 2019

The objective of this study was to investigate slaughtering performance, carcass grade, and quantitative traits of cuts according to seasonal influence by each month in pigs slaughtered in livestock processing complex (LPC) slaughterhouse in Korea, 2017. A total of 267,990 LYD ($Landrace{\times}Yorkshire{\times}Duroc$) pig data were used in this study. Results of slaughter heads, sex distribution, carcass weight, backfat thickness, grading class, total weight, and fat and lean meat percentages of each cut predicted by AutoFom III were obtained each month. The number of slaughtered pigs was the highest in early and late fall but the lowest in midsummer. Only in midsummer that the number of females was higher than that of castrates. During 2017, carcass weight was the lowest in late summer. Backfat thickness was in the range of 21-22 mm. In mid and late spring, pigs showed high 1+ grade ratio (37.05% and 36.15%, respectively). For traits of 11 cuts predicted by AutoFom III, porkbelly showed lower total weight, lean weight, and fat weight in midsummer to early fall but higher lean meat percentage compared to other seasons. Weights of deboned neck, loin, and lean meat were the highest in midfall compared to other seasons (p<0.05). In conclusion, characteristics of slaughtering, grading, and economic traits of pigs seemed to be highly seasonal. They were influenced by seasons. Results of this study could be used as basic data to develop seasonal specified management ways to improve pork production.

• Journal of Drive and Control
• /
• v.17 no.1
• /
• pp.37-43
• /
• 2020

An intelligent excavator can be divided into Machine Guidance (MG), semi-automatic, and unmanned by technology. The MG technology excavator is equipped with a tilt sensor on each link of the excavator and a GPS is installed on the excavator body to inform the user of the position of the excavator bucket end. Machine control (MC) technology that assists the user's work can be divided into semi-automatic and fully automatic technology. The semi-automatic MC equipment has already been commercialized by Komatsu and Caterpillar. The MC excavator is equipped with an electro-hydraulic system, sensors and controllers to control the excavator bucket end according to the user's needs. In this study, the semi-automated excavator modified based on manual excavator, is equipped with an electro-hydraulic system, a controller system, multi-sensors and a control algorithm is developed to assist in excavation work such as leveling and grading. By applying the developed technology, it was possible to confirm productivity improvement compared to manual digging and leveling work. In the future, further research to improve the accuracy of the hydraulic precision control and collaborative work with heterogeneous construction equipment such as dump truck and automated collaboration tasks technology could be developed.

• Journal of the Korean Home Economics Association
• /
• v.35 no.5
• /
• pp.249-264
• /
• 1997

The purpose of this study was to provide the reference information for user and potential users of apparel CAD system is Korea. Two interviews were carried out for the study. The apparel CAD system of Assyst, Gerber and Yuka was selected for technical comparative study. The results were as follows: 1. The future development of the apparel CAD system is the transfer of the developed pattern design from a 3D design system and of CIM concept. 2. The share of data is working closely in a module function. So the Assyst system provide connectivity and communication between all apparel CAD system's module and other automation programs. This system is suitable for CIM production line. 3. The Gerber system is developed the Apparel CAD system which is given by the CAM system's technical ability. This system is given high insurance of ability to the service and data transportation with other systems from users in the Korea. 4. The Yuka system is developed pattern making by the Apparel CAD system. This system's different methods which is compared with other systems are the split grading and auto pattern making. So this system is suitable for users which want to product many items and a little amount garment by using the Apparel CAD system.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.10
• /
• pp.377-382
• /
• 2018

This study deals with internal state and tissue density analysis methods for red ginseng grade determination. For internal measurement of red ginseng, there have been various studies on nondestructive testing methods since the 1990s, It was difficult to grasp the most important inner hole and inside whites in the grading. So in this study, we developed a closed capturing device for infra-red illumination environment, and developed an internal measurement system that can detect the presence and diameter of inner hole and inside whites. Made devices consisted of infrared lights with a high transmission rate of red ginseng in 920 nanometer wave band, a infra-red camera and a Y axis actuator with a red ginseng automatically controlled focus on the camera. The proposed algorithm performs an auto-focus system on the Y-axis actuator to automatically adjust the sharp focus of the object according to the size and thickness. Then red ginseng is rotated $360^{\circ}$ at $1^{\circ}$ intervals and 360 total images are acquired, and reconstructed as a sinogram through Radon transform and Back-projection algorithm was performed to acquire internal images of red ginseng. As a result of the algorithm, it was possible to acquire internal cross-sectional image regardless of the thickness and shape of red ginseng. In the future, if more than 10,000 different shapes and sizes of red ginseng internal cross-sectional image are acquired and the classification criterion is applied, it can be used as a reliable automated ginseng grade automatic measurement method.