• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.70-75
• /
• 2015

With the development of communication technologies and smartphone, requirements of positioning accuracy for LBS (Location Based Service) are becoming increasingly important. LBS is a service which offers the information or entertainment based on a location to users. Therefore, positioning is very important for LBS. Among many positioning methods, IEEE 802.11 WLAN positioning measures the distance using the RSSI (Received Signal Strength Indicator) attenuation log model. Thus in order to enhance positioning, we modify the IEEE 802.11 RSSI attenuation log model by adaptive weighting method. In this paper, we propose improved IEEE 802.11 RSSI attenuation log model for enhanced indoor positioning.

• 한국음향학회지
• /
• 제7권2호
• /
• pp.20-25
• /
• 1988

본 연구는 소음전파에 대한 옥외실험과 축적 음향모형실험에 의해서 지표면에 의한 초과감쇠 특징을 밝힌 것으로써, 옥외실험에 의한 소음전파감쇠는 음향출력이 큰 소형엔진을 사용하여, 거리감쇠로부터 산출한 실측의 초과감쇠와 Log(D/(Hs+Hr))의 관계를 확인했다. 그 결과 소음전파감쇠는 풍향, 주파수에 따라 다르며 직선회귀 된다는 것을 알 수 있었다. 그리고, 지표면상의 초과감쇠치는 통기저항을 이용해서 Log(D/Hs+Hr))을 파라미터로써 구할 수 있었고, 가장 적당한 통기저항$\sigma$는 실측의 초과감쇠치와 임의의 $\sigma$에 대한 $L=-20Log\mid1+(r_1/r_2)Qexp(ik, \bigtriangleup r)\mid$ 식의 평균자승 오차가 가장 적어질 때 결정된다. 모형의 지표로써 축척 1/40의 모형실험으로, 큰 무향실내에서 거리감쇠의 측정을 한 결과, 실측치와의 대응이 충분하다는 것을 확인했다.

• 한국지진공학회논문집
• /
• 제17권2호
• /
• pp.71-77
• /
• 2013

The uniform hazard spectra for seven major cities in Korea, Seoul, Daejeon, Daegu, Busan, Gwangju, Ulsan, and Inchon are suggested. Probabilistic seismic hazard analyses were performed using the attenuation equations derived from seismology research in Korea since 2000 and the seismotectonic models selected by expert assessment. For the estimation of the uniform hazard spectra, the seismic hazard curves for several frequencies and PGAs were calculated by using the spectral attenuation equations. The seismic hazards (annual exceedance probability) calculated for the 7 metropolises ranged from about $1.4305{\times}0^{-4}/yr$ to $1.7523{\times}10^{-4}/yr$ and averaged out at about $1.5902{\times}10^{-4}/yr$ with a log standard deviation of about 0.085 at 0.2 g. The uniform hazard spectra with recurrence intervals of 500, 1000, and 2500 years estimated by using the calculated mean seismic hazard on the frequencies presented peak values at 10.0 Hz, and the log standard deviations of the difference between metropolises ranged from about 0.013 to 0.209. In view of the insignificant difference between the estimated uniform hazard spectra obtained for the considered metropolises, the mean uniform hazard spectrum was estimated. This mean uniform hazard spectrum is expected to be used as input seismic response spectrum for rock sites in Korea.

• 지구물리와물리탐사
• /
• 제8권1호
• /
• pp.41-49
• /
• 2005

이 연구에서는 메탄 하이드레이트 부존 지역의 속도 분포를 구하기 위해서 무작위 불균질 모델을 개발하였다. P 파 물리검층 자료는 von Karman 유형의 자기상관함수와 비가우스 확률 분포를 가진다. 속도 분포는 수백 m/s의 차이가 나는 두 개의 정점(peak)들을 갖는다. 이중모드 속도 분포를 가진 무작위 불균질 매질의 모델은 normal spectral-based generation 방법에 의해 만들어진, 가우스 속도 분포를 갖는 매질의 사상을 통해 만들어졌다. 또한 타원 자기상관 함수를 이용하여 무작위 매질에 자기상관 길이의 이방성을 첨가하였다. 유사 P 파 속도 검층기록은 현장자료의 특징을 잘 구현해냈다. 이 모델을 두 개의 탄성파 전파 수치 모형에 적용하였다. 두 개의 다른 주파수 대역의 송신신호들에 의해 만들어진 합성 반사 단면도들을 통해 이중모드 분포를 가진 무작위 모델의 속도 변화가 파의 산란에 영향을 줌으로써 BSR의 주파수 의존성의 원인이 됨을 알 수 있다. 합성 시추공간 단면도는 현장자료에서 보여지는 심한 감쇠가 산란에 의한 부가적인 진폭 감쇠에 의한 것임을 보여주고 있다. 결론적으로 이중모드 분포를 가진 무작위 불균질성은 하이드레이트 부존층 모델링의 핵심이고, 이를 통해 하이드레이트 부존 지역의 탄성파 단면도들에서 관찰되는 주파수 의존성과 산란현상에 대해 설명할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.883-887
• /
• 2011

Location-based service (LBS) is becoming an important part of the information technology (IT) business. Localization is a core technology for LBS because LBS is based on the position of each device or user. In case of outdoor, GPS - which is used to determine the position of a moving user - is the dominant technology. As satellite signal cannot reach indoor, GPS cannot be used in indoor environment. Therefore, research and study about indoor localization technology, which has the same accuracy as an outdoor GPS, is needed for "seamless LBS". For indoor localization, we consider the IEEE802.11 WLAN environment. Generally, received signal strength indicator (RSSI) is used to obtain a specific position of the user under the WLAN environment. RSSI has a characteristic that is decreased over distance. To use RSSI at indoor localization, a mathematical model of RSSI, which reflects its characteristic, is used. However, this RSSI of the mathematical model is different from a real RSSI, which, in reality, has a sensitive parameter that is much affected by the propagation environment. This difference causes the occurrence of localization error. Thus, it is necessary to set a proper RSSI model in order to obtain an accurate localization result. We propose a method in which the parameters of the propagation environment are determined using only RSSI measurements obtained during localization.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.37-45
• /
• 2015

본 논문에서는 음향 불안정 해석 기법을 이용하여 알루미늄 입자가 내포된 고체로켓 모터의 연소 불안정 현상을 예측하였다. 특히, 알루미늄 입자들의 로그정규분포 대비 단일 크기의 입자 분포가 연소 불안정 감쇠에 미치는 영향을 비교하여 각각의 민감도를 분석하였으며 고체로켓 모터의 길이 스케일 변화에 따른 음향 감쇠 효과를 단일 입자 크기를 가정한 경우와 비교하였다. 입자에 의한 감쇠는 불안정 모드 주파수 대역이 상대적으로 고주파인 작은 스케일 모터에서 효과적이었으며, 실제 포집장치를 통해 도출된 입자 크기 분포도를 고려한 연소 불안정 예측이 단일 입자 크기로 가정한 예측 결과보다 큰 불안정 감쇠를 보였다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.79-91
• /
• 2013

PURPOSES : The methods of measuring the sound from the noise source are Pass-by method and NCPX (Noble Close Proximity) method. These measuring methods were used to determine the linkage of TAPL (Total Acoustic Pressure Level) and SPL (Sound Pressure Level) in terms of frequencies. METHODS : The frequency analysis methods are DFT (Discrete Fourier Transform) and FFT (Fast Fourier Transform), CPB (Constant Percentage Bandwidth). The CPB analysis was used in this study, based on the 1/3 octave band option configured for the frequency analysis. Furthermore, the regression analysis was used at the condition related to the sound attenuation effect. The MPE (Mean Percentage Error) and RMSE (Root Mean Squared Error) were utilized for calculating the error. RESULTS : From the results of the CPB frequency analysis, the predicted SPL along the frequency has 99.1% maximum precision with the measured SPL, resulting in roughly 1 dB(A) error. The TAPL results have precision by 99.37% with the measured TAPL. The predicted TAPL results at this study by using the SPL prediction model along the frequency have the maximum precision of 98.37% with the vehicle velocity. CONCLUSIONS : The Predicted SPL model along the frequency and the TAPL result by using the predicted SPL model have a high level of accuracy through this study. But the vehicle velocity-TAPL prediction model from the previous study by using the log regression analysis cannot be consistent with the TAPL result by using the predicted SPL model.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.18-25
• /
• 2005

Stochastic ground-motion method is adopted to simulate horizontal PGA values for the offshore Uljin earthquake recorded at nationwide seismic stations. For this purpose, the Fourier spectra are calculated at every stations based on comprehensive results of wave propagation and site effect which were previously revealed through inversion process applied to large accumulated spectral D/B. In addition, the apparent source spectrum of the offshore Uljin earthquake is estimated by removing the path and site response from the observed spectra. The distance dependent time-duration model is revised by iteratively fitting the PGA values generated by using the raw spectra data to the observed PGA data. The stochastic ground-motion method predicts the observed PGA values within a error of ${\sigma}_{log10}=0.1$. Transfer functions of a site relative to another site are estimated based on the error residual of the inversion results and used to convert PGA values at multiple stations to expected PGA values at a reference station of TJN. The converted PGA values can be used as basic data to evaluate the ground-motion attenuation relations developed for seismic hazard analysis that concerns the large damaging earthquakes.