• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1215-1220
• /
• 2004

Cell adhesion to any material surface is considered to be fundamental and important phenomenon in the fields of tissue engineering. Cell adhesion molecules, mechanism, and attachment force have been studied and described a lot. However, the effects of mechanical stimuli on the adhesive forces still have been left much to be investigated. In this study, to investigate the changes in cell adhesive force due to resting time period during the intermittent hydrostatic pressurizing (IHP), cells were cultured under the IHP with various resting times. Then the cell adhesive forces were measured quantitatively utilizing a cell detachment test system and immunofluorescent staining was performed using fluorescent microscopy. In the results, immediately after mechanical stimuli (150 minutes after seeding) and one hour later (210 minutes after seeding), the average adhesive force of experimental group 5 (resting time: 15min) compared with that of control group at same culture time was increased significantly (p<0.05). The results indicated that IHP can contribute in improving cell adhesive force and some of time intervals were required for the expression of cell response.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.125-129
• /
• 2002

Authors had developed the model for the fatigue life assessment of welded details considering residual stress and its relaxation. The model consists of three ingredients; a hot-spot stress approach, a residual stress relaxation, and an equivalent stress. The equivalent stress is induced by stress ranges and the ratios between the applied mean stresses and the ultimate stress of material. Once being tuned with two specific fatigue tests by using load carrying cruciform joint, this model can be applied to many kinds of welded details which structural stress concentration factors are different from each other. This paper reports the application of the proposed model for various welded details including cover plate, longitudinal stiffener, gusset and side attachment. From the investigation of predicted results by using the proposed model it was shown that the ambiguous fatigue characteristics of the various details influenced widely by the welding residual stress are clarified, and also the model could be applied to assess fatigue life of general welded structures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.714-720
• /
• 2003

Due to the electric power shortage in summer season and regulation of freon refrigerant, the application of gas absorption refrigeration and hot water systems are considerably increasing trend. But, this system consists of condenser, heat exchanger, supply pipe and radiator etc. which are easily corroded by acidity and dissolved oxygen and gases. In result, this system occurs scale attachment and corrosion damage like pitting and crevice corrosion. In this study, electrochemical polarization test of heat exchanger tubing material (copper, aluminium brass, 30% cupronickel(30% Cu-Ni)) was carried out in 60% lithium bromide solution at $95^{\circ}C$. As a result of polarization test, corrosion behavior by impressed potential and local corrosion. such as galvanic corrosion, pitting corrosion behavior, of tubing materials was investigated. The main results obtained are as follows: (1) The effect of pitting and crevice corrosion control of 30% cupronickel in 60% LiBr solution at $95^{\circ}C$ is very excellent. (2) Dissimilar metal corrosion of 30% cupronickel coupling to aluminium bronze is the most sensitive. (3) Current density behavior of tube materials by impressed potential is high in order of copper > aluminium brass > 30% cupronickel.

• 교육시설
• /
• 제10권1호
• /
• pp.5-14
• /
• 2003

This study is performed to improve the elevation design of schools by the tools of color. Color is a very powerful design tool, one that is capable of altering the perception of a building or a space. The present form and material of elevations of schools are very monotonous and uniform. Therefore students do not have attachment for schools. And also in neighborhood, schools do not function as a good landmark. This study aims to develop good sample of exterior color design for schools and verify the guideline of color design for schools which was went ahead of this study. Through the survey of color preference and color image preference of the students of Seoul High School, the attitude of students to color were considered in design. The exterior color design for Seoul High School was realized. The result of this study suggests that the exterior color design can improve the image and plasticity of present schools. But within the monotonous character of present elevation, the effect of color design will be limited. Therefore to make a effective project, exterior color design should be accompanied with the alteration of elevation to make a plastic element of elevation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.243-244
• /
• 2010

철근콘크리트 보의 휨 보강을 위하여 활용되는 재료는 매우 다양하다. FRP의 경우 우수한 무게-강성비 및 시공성을 바탕으로 최근 활발히 활용되어지고 있다. 그러나 이들 FRP 휨 보강재의 활용에 있어 취성적 재료특성은 실제 현장적용에 있어 콘크리트 박리파괴 유발 및 단부 부착파괴의 주요 원인으로 고려되어지고 있다. 따라서 본 연구에서는 이들 FRP 휨 보강재의 연성적 거동을 개선하기위하여 복합재료 구성요소 중 Fiber의 적층면적 중 일부분을 알루미늄 재료로 대체하여 휨 보강재로서의 구조적 성능을 조사하였다. 연성보강 fiber로는 얇은 두께의 알루미늄이 고려되었으며 다양한 배합설계 조건이 본 연구에서 수행되었다. 최종적으로 알루미늄 삽입 보강재 제작에 따른 연성개선 및 에너지 저장효과에 대한 결과들을 실험을 통하여 연구하였다.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.9-15
• /
• 2016

Due to material-specific vulnerabilities, the surfaces of the liquid crystal glasses used in mobile phones can crack easily, with even the smallest cracks undergoing propagation. To protect the glass surfaces, films are attached to the surfaces during the mobile phone production process. However, after machining the liquid crystal, removal of the film on the liquid crystal surface using chemical and mechanical methods is required. In this research, a peeling apparatus was developed for removing the films attached to liquid crystal surfaces during the production process. Mechanical attachment and design automation through experimentation and finite element modelling were performed to confirm the validity of the design.

• 복식
• /
• 제62권3호
• /
• pp.73-83
• /
• 2012

The purpose of this study is to contribute in developing guidebooks that can be used in the courses of needlework study by comparing and analyzing the contents and organizations of needlework-related teaching resources available at the present university and fashion-related educational institutions. This research could help us train technical human resources to be highly adaptable in industrial settings. The results of this study showed that the overall organization of contents is mostly divided into such categories as needlework kits, basic hand sewing, seam finishing, partial needlework and decorative needlework. The study results also indicated that such content organization must be considered in basic needlework/sewing processes and that each content needs to provide more various and detailed information by reflecting recent trends in design. Partial needlework has different applications in terms of interlining attachment, subsidiary materials, or sewing techniques; therefore, consistent descriptions and standard guidelines should be given according to what material is used and which design is planned. This study found that most teaching resources covered only needlework or sewing techniques without giving specific descriptions of types of materials, lining and interlining that can have great influence on sewing methods and instructions on how to use the materials. These findings suggest that the teaching resources need to add further technical instructions for the proper use of materials especially in response to the recent release of brand-new materials and sewing machines in the market.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.791-797
• /
• 2014

Abstract Scaffold used as a carrier of the cell has been actively conducted using plenty of technology in tissue engineering. ${\beta}$-tricalcium phosphate (${\beta}$-TCP) material has shown good biocompatibility and osteoconductive ability when it was implanted as a bone graft substitute in osseous defect in human and animal studies for bone regeneration. In this study, we fabricated the blended polycaprolactone (PCL) and ${\beta}$-TCP scaffold by the polymer deposition system (PDS). The PCL/${\beta}$-TCP scaffold was fabricated at a temperature of $110^{\circ}C$, pressure of 650 kPa, and scan velocity of 100 mm/sec. The Overall geometry and size of the scaffold were fixed circle type with a diameter of 10 mm and a height of 4 mm. PCL/${\beta}$-TCP scaffold was observed by scanning electron microscopy. Cell attachment and proliferation of the scaffold containing 30 wt% ${\beta}$-TCP was superior to those containing 10 wt% and 20 wt% ${\beta}$-TCP.

• Structural Engineering and Mechanics
• /
• 제57권6호
• /
• pp.989-1014
• /
• 2016

This paper deals with the analysis of the natural frequencies, mode shapes of an axially loaded beam system carrying ends consisting of non-concentrated tip masses and three spring-two mass sub-systems. The influence of system design and sub-system parameters on the combined system characteristics is the major part of this investigation. The effect of material properties, rotary inertia and shear deformation of the beam system is included. The end masses are elastically supported against rotation and translation at an offset point from the point of attachment. Sub-systems are attached to center of gravity eccentric points out of the beam span. The boundary conditions of the ordinary differential equation governing the lateral deflections and slope due to bending of the beam system including developed shear force frequency dependent terms, due to the sub.system suspension, have been formulated. Exact formulae for the modal frequencies and the modal shapes have been derived. Based on these formulae, detailed parametric studies are carried out. The geometrical and mechanical parameters of the system under study have been presented in non-dimensional analysis. The applied mathematical model is presented to cover wide range of mechanical, naval and structural engineering applications.

• Animal cells and systems
• /
• 제13권2호
• /
• pp.161-167
• /
• 2009

The cuticle of spider's exoskeleton is a hydrophobic and non-adhesive material, but the jumping spiders have the distinctive attachment apparatus for adhesion on smooth dry surface without sticky fluids. We have examined the whole tarsal appendages of the jumping spider, Plexippus setipes with using scanning electron microscope to reveal the fine structural characteristics of the dry adhesion system. All eight legs have the scopulae with a pair of claws on the tip of feet. Each scopula is composed of two groups of setae that are capable of dry adhesion on smooth surface, and the hook structure of the claw is advanced to move on the rough surface. The setae toward the bottom of the tarsal segment are densely covered by numerous setules on the underside which broadened from middle to distal portion. It has been revealed by this research that the contact area of the setule is always a triangular shape, and these cuticular surfaces are connected by the elongated stalks from the underlying setae. It is likely that the nano-scale structures including a triangular depression and a longitudinal groove on each setule could functionate when the spider detach its feet from the substrate.