• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.37-47
• /
• 2005

Recently, the malicious e-mail worm-viruses have been widely spreaded over the Internet. If the recipient opens the e-mail attachment or an e-mail itself that contains the worm-virus, the worm-virus can be activated and then cause a tremendous damage to the system by propagating itself to everyone on the mailing list in the user's e-mail package. In this paper, we have designed and implemented two methods blocking e-mail worm-viruses. In the fist method, each e-mail is transmitted only by sender activity such as the click of button on a mail client application. In the second one, we insert the two modules into the sender side, where the one module transforms a recipient's address depending on a predefined rule only in time of pushing button and the other converts the address reversely with the former module whenever an e-mail is sent. The lader method also supports a polymorphism model in order to cope with the new types of e-mail worm-virus attacks. The two methods are designed not to work for the e-mail viruses. There is no additional fraction on the receiver's side of the e-mail system. Experimental results show that the proposed methods can screen the e-mail worm-viruses efficiently with a low overhead.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.957-966
• /
• 2018

Recently, the demand for remote patient monitoring based on IoT has been increased due to aging population and an increase in single-person household. A non-contact biological signal measurement system using multiple IR-UWB radars for remote patient monitoring is proposed in this paper. To reduce error signals, a multilayer Subtraction algorithm is applied because when the background subtraction algorithm was applied to the biological signal processing, errors occurred such as voltage noise and staircase phenomenon. Therefore, a multilayer background subtraction algorithm is applied to reduce error occurrence. The multilayer background subtraction algorithm extracts the signal by calculating the amount of change between the previous clutter and the current clutter. In this study, the SVD algorithm is used. We applied the improved multilayer background subtraction algorithm to biological signal measurement and computed the respiration rate through Fast Fourier Transform (FFT). To verify the proposed system using IR-UWB radars and multilayer background subtraction algorithm, the respiration rate was measured. The validity of this study was verified by obtaining a precision of 97.36% as a result of a control experiment with Neulog's attachment type breathing apparatus. The implemented algorithm improves the inconvenience of the existing contact wearable method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.54-63
• /
• 2024

The long-term use of an implant overdenture shows problems, such as wear of attachment, concentrated occlusal forces on the anterior teeth, fracture of artificial teeth and rotation of denture. By transitioning to an Implant-assisted removable partial denture (IARPD) using additional implant placement, the problems can be solved. In this case report, a transition was made from implant overdenture to IARPD utilizing surveyed crowns to distribute occlusal forces concentrated on anterior teeth and to prevent denture rotation in a skeletal Class III patient. Design of definitive prosthesis with appropriate function and aesthetics was determined through several stages of provisional restorations. In this case, appropriate posterior occlusion and maintenance of peri-implant bone level of definitive prosthesis were observed.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.191-202
• /
• 2007

In these days, open signboard system is controlled by administrative policy and law, but there is no consideration for different types of building. As such, this study aims to propose planning criteria for streetside commercial buildings, such as elevation and mass design of buildings, layout of signboard attached to the building elevation with consideration for streetscape. In mass planning for streetside commercial buildings, the building type with front open space keeps lower open signboard density than the building type directly leading to the street. It is desirable that open signboard of lower floor part is attached by a horizontal type, open signboard of low medium floor part by a projected vertical type, open signboard of high medium floor part and roof part with a minumum attachment of open signboard. As for elevation planning relative to open signboard, it is desirable that an irregular wall type is more useful than a regular wall type to control open signboard. And in all cases, horizontal element facade has a handicap to control the quantity of signboard. If the building has a corner, the piloti should be used in the corner of lower story for smooth circulation of pedestrians and emphasizing the transparency of elevation. Specially, in the case of a round corner, the corner should be emphasized by the composition of high transparent mass.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.117-128
• /
• 2005

The French Belle Epoque is a period where the literary and artistic movement was very activated. The birth of the cubism reflects this atmosphere of the times and the change of paradigm in all fields. The Bergsonism is often designated as one of the important backgrounds of cubism. The problem consists in knowing if Bergsonian ideas gave real influence on the cubist movement and up to what point. Our analysis will show that it is not homogenous and very variable according to painters. In the case of Picasso and Braques it seems be a simple inspiration of Zeitgeist. But the influence upon Metzinger and Gleizes is explicit. The text of 1912, Du cubism, prove their attachment to his thought. The key concept of cubist theory, influenced by Bergsonian philosophy, is the concept of simultaneity. Cubist simultaneity is in one hand a reflection of an artist's psychological experience and the other hand a synthesis of multiple views for grasping the object in itself by the way of conceptual representation. The temporal simultaneity could be identified with the notion of memory, which is a temporal continuity connecting the past to dynamic present. The spatial simultaneity is a juxtaposition of multiple views obtained by the movement around the object. But the dose reading of Bergson's text shows that there is a divergence between the notion of cubist simultaneity and his ideas. The biased interpretation is often, as well as the strict understanding, like the history shows us well, a great source of inspiration and creativity. The cubist mouvement is not far from this case.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.599-610
• /
• 2016

This paper reports the results of a systematic review (SR) and meta-analysis research to compare the effect of Kangaroo care, targeting mothers and premature infants. A randomized clinical trial study was performed until February 2015. The domestic literature contained the non-randomized clinical trial research without restriction according to the level of the study design. A search of the Ovid-Medline, CINAHL, PubMed and KoreaMed, the National Library of KOREA, the National Assembly Library, NDSL, KISS and RISS. Through the KMbase we searched and combined the main term ((kangaroo OR KC OR skin-to-skin) AND (care OR contact)) AND (infant OR preterm OR Low Birth Weight OR LBW), ((kangaroo OR kangaroo OR kangaroo) AND (care OR nursing care OR management OR skin contact)) was made; these were all combined with a keywords search through the selection process. They were excluded in the final 25 studies (n=3051). A methodology checklist for randomized controlled trials (RCTs) designed by SIGN (Scottish Intercollegiate Guidelines Network) was utilized to assess the risk of bias. The overall risk of bias was regarded as low. In 16 studies that were evaluated as a grade of "++", 9 studies were evaluated as a grade of "+". As a result of meta-analysis, kangaroo care regarding the effects of premature mortality, severe infection/sepsis had an insignificant effect. Hyperthermia incidence, growth and development (height and weight), mother-infant attachment, hypothermia incidence, length of hospital days, breast feeding rate, sleeping, anxiety, confidence, and gratification of mothering role were considered significant. In satisfaction of the role performance, depression and stress presented contradictory research results for individual studies showing overall significant difference. This study has some limitations due to the few RCTs comparing kangaroo care in the country. Therefore, further RCTs comparing kangaroo care should be conducted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.2
• /
• pp.37-51
• /
• 2018

Recently, urban parks are required to actively participate with residents in order to strengthen social functions and maintain sustainable management. This study analyzed the formation process of volunteer resident groups (Chamsamo) in the neighborhood parks in which local residents can participate in an ongoing basis based on the solidarity of a daily living space. The important factors in the activation of resident activity are derived from 5 aspects including resources, local area, resident group capacity, resident group role, and public support. The results of the study are as follows. 1) Life-friendly resources: It was important to find life-friendly resources such as 'Chamsaem' in the park. The combined resources of continuous human activities provided various benefits to the residents. This has led to stronger attachment and community activities to continue to utilize attractive resources in the park. 2) Sharing Common Daily Spaces and Expansion: As the Chamsamo activities were centered around the neighborhood, the network of activists in the local community expanded. This led to continued resident interest and favorable participation as well as to the regional expansion of Chamsamo activities. 3) Park management as part of everyday life: Park management became a part of everyday life, and pleasant park management was facilitated by utilizing the talents of the residents, who carried out diverse activities and constantly streamlined their hard labor. 4) Chamsamo's Leadership Linking Residents and the Public Sector through Leading Park Management Activities: Chamsamo served as a middle leader in linking the public sector and its users. 5) Role and Support of the Public Sector: In order to be able to sustain the activities of residents, the government's willingness to support the resident-led activities of the park in planning and operating the public sector was required. In the public management system of the park, support for residents' activities such as financing, education, and consulting was necessary.