• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.93-98
• /
• 2004

Serial ATA interface Is inexpensive comparatively and performance is superior. So it is suitable technology in demand that now require data transmission and throughput of high speed. This paper describes a design and implementation of Serial ATA Link layer about error detection and 8b/10b encoder/decoder for DC balance in frequency 150MHz. The 8b/10b Encoder is partitioned into a 5b/6b plus a 3b/4b coder. The logical model of the block is described by using Verilog HDL at register transistor level and the verified HDL is synthesized using standard cell libraries. And it is fabricated with $0.35{\mu}m$ Standard CMOS Cell library and the chip size is about $1500{\mu}m\;*\;1500{\mu}m$. The function of this chip has been verified and tested using testboard with FPGA equipment and IDEC ATS2 test equipment. It is used to frequency of 100MHz in verification processes and supply voltage 3.3V. The result of testing is well on the system clock 100MHz. The designed and verified each blocks may be used IP in the field of high speed serial data communication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4736-4741
• /
• 2014

This study examined PCB component cleaning on a PCB component surface, which has defects of precipitation type washing (existing rinse method), sealant and foreign material formed in the adhesive process that could not be removed easily. The spin jig was developed for PCB component cleaning, in which the PCB component settled down, to solve the conventional problem of the removal of foreign material with the centrifugal force by high speed rotation. The results are as follows. With decreasing fraction defect in PCB component washing, the development and substrate damage decreased by more than 80% according to the abstergent in the rotary type using the centrifugal force in the existing precipitation type. When the base plate showed a large difference with the time to include the process after washing the design using the existing method, easy attachment and separation of the PCB component could be possible. The washing time was enhanced 90% compared to the existing time. The reliability of the security and washing collaboration of the design and stability of the cleaning process could be secured so that there was no phenomenon of secession, the PCB component fixed for a cleansing rotation jig could maintain a fixed force by the centrifugal force. The stability and reliability of the washing process and the defective rate could be improved to less than 1%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.98-106
• /
• 2011

The deck of steel box girder bridges is composed of deck plate, longitudinal rib, and transverse ribs. The orthotropic steel decks have high possibility to fatigue damage due to numbers of welded connection part, the heavy contact loadings, and the increase of repeated loadings. Generally, the local stress by the repeated loadings of heavy vehicles causes the orthotropic steel deck bridge to fatigue cracks. The increase of traffic volume and heavy vehicle loadings are promoted the possibility of fatigue cracks. Thus, it is important to exactly evaluate the structural behavior of bridge considering the contact loading area of heavy vehicles and real load patterns of heavy trucks which have effects on the bridge. This study estimated the effect of contact area of design loads and real traffic vehicles through the finite element analysis considering the real loading conditions. The finite element analysis carried out 4 cases of loading patterns in the orthotropic steel deck bridge. Also, analysis estimated the influence of contact area of real truck loadings by the existence of diaphragm plate. The result of finite element analysis indicated that single tire loadings of real trucks occurred higher local stress than one of design loadings, and especially the deck plate got the most influence by the single tire loading. It was found that the diaphragm attachment at joint part of longitudinal ribs and transverse ribs had no effects on the improvement of structural performance against fatigue resistance in elastic analysis.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.326-332
• /
• 2011

Carbon, Aramid, Boron and Glass fibers are used as fibrous materials to promote structural bearing strength. Of these fiber types, carbon fiber is the most commonly used material, and is characterized by having a one-way direction, which is strengthened by tensile strength due to the attached direction only, while other types of fibers are two-way. Therefore, when applied in the field, the attachment direction of fiber is a very important factor. However, when fiber direction is not mentioned in the design drawing, there sometimes is no improvement in structural strength, as the fiber is being installed by a site engineer or workers who lack structural knowledge. The purpose of this study was to propose an optimal direction of carbon fiber through a comparison & analysis of reinforcing efficiency with reinforced experimental columns that used carbon fibers in each of the inclined, horizontal and vertical directions. According to the results, horizontal direction in the reinforced column was improved by 153.43%, but vertical direction was 104.61% only, and it was understood this was due to increased tensile strength along the fiber direction. For this reason, it is necessary to include information regarding fiber direction in design and site management.

• Korean Institute of Interior Design Journal
• /
• v.18 no.3
• /
• pp.114-121
• /
• 2009

The number of the disabled is increasing every year. Growing interest in social welfare, but still the disabled person in places is restricted on the activities are due to obstacles. This study proposes an improvement direction through an research and analysis of installation status of convenient facilities in social welfare halls was planned after that the law of increase of convenience for the disabled person is enforced in 1998. This study analyzed nine social welfare halls of seoul including Yongsan-gu(GW), Guro-gu(GD, HW), Yeongdeungpo-gu(SG), Seodaemun-gu(SD), Dobong-gu(DB), Nowon-gu(NS), Seongbuk-gu(WG) and Dongdaemun-gu(JG). The evaluation criteria for the installation of convenient facilities for the disabled person in each social welfare hall based on the law of increase of convenience for the disabled person, and referred to other data. Also, review the criteria for the installation of convenient facilities, and grasp the present situation through the survey of convenient facilities in social welfare halls, and provides the installation standards of convenient facilities. The result are as followings. There were many problems to be improved in approach of the intermediate space, parking lot, entrance of the inside space and corridor that must be installed for the convenience of the disabled. In the intermediate space, the slope of the ramp, curb, induction handle etc. for a safety must be installed. Parking spaces for the disabled must be located closest to the main entrance, an induction marker or the handle, and the attachment of a directional sign etc. must be improved. In the inside space, it is convenient for the disabled person use to install an automatic door and swing door simultaneously at the main entrance. And, the height of the door handle, an induction block, a braille display panels of the appropriate height in the entrance, a braille display in start and end of the stairs handle, the handle of the side wall, the stairs to prevent slippage etc. must be improved in the corridors. The case of the sanitation which is a recommendation item is equipped formally with disabled toilets are difficult to use. Information and other convenience facilities for the disabled person in all the social welfare halls were not considered.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.633-642
• /
• 2013

This study has attempted to investigate correlations among variables against 366 college students from cosmetology-related departments in Busan and figure out the effects of the variables which have an effect on adaptation to college life. First, in terms of 'college life stress', a positive correlation was observed with 'depression' while a negative correlation was found with 'adaptation to college life'. As 'social support' increased, 'self-efficacy' and 'adaptation to college life' were high as well. However, 'depression' was low. On the contrary, 'self-efficacy' revealed a negative correlation with 'depression' but a positive correlation with 'adaptation to college life'. Second, as peer support and professor support increased, and academic performance and value-related problems and depression decreased, 'adaptation to college life' was satisfying. Third, in terms of the effect of 'adaptation to academic achievements', 'academic matters' was the highest. In terms of the effect of social adaptation, 'peer support' was the highest. In terms of the effect of emotional and physical adaptations, 'depression' was the highest. In terms of the effect of attachment to college, 'professor issues' were the highest.

• Design Convergence Study
• /
• v.16 no.5
• /
• pp.1-20
• /
• 2017

Cardio-cerebrovascular disease is one of the chronic diseases that often attack people in Korea, and in fact, it ranks second in terms of death rate. This disease can be prevented by improving lifestyle, usual health care is important. But, in Korea most of the prevention or management programs adopt passive methods like using guide books or giving lectures, so it is not very effective in preventing the disease. Presently, the smart health care market is being developed in Korea and overseas. As an example, quantified self is being spread through wearable devices which are intended to measure each individual's health conditions and quantify body data into numbers for bettering habits. Accordingly, this author will explore and discuss wearable health care devices so as to prevent and manage cardio-cerebrovascular disease in a more active way. First, this study has classified wearable health care devices presently commercialized or related with cardio-cerebrovascular disease into wrist, clothes, or attaching types by the way of their attachment and analyzed them. After that, summing that up, this author performed cross-tabulations with other ways of preventing cardio-cerebrovascular disease. This will contribute to improving one's health care behavior about disease more actively and also work as an active interdisciplinary mechanism in research dealing with how to prevent disease afterwards.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.37-45
• /
• 2024

This paper presents a design approach for passive vibration control to reduce vertical vibrations transmitted to the control unit during hovering flight of a quadrotor drone. Ground vibration test simulation based on finite element model was performed for forced vibration analysis of the quadrotor drone. First, modal analysis was performed to evaluate dynamic characteristics. Forced vibration response analysis was then performed to obtain the steady-state response within the operating frequency range under the hovering flight condition. Furthermore, to obtain the vibration reduction effect, a viscous damping tape was applied at positions that could induce vibrations transmitted to the control unit under the same conditions. Such a passive vibration control approach was investigated. Relevant vibration reduction effect was assessed with respect to the application of damping materials and the attachment position.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.293-302
• /
• 2006

clay cups with handles made in studios in Korea and the United States were selected and analyzed. The shape of cup were fixed to ensure proper comparison between handle size of the cup and position. The variable factors were the thickness of the handle, the number of fingers required to hold the cup, the relationship between the handle's shape and the position of its attachment to the cup, the effect of the handle's setter, the change in shape of the handle's thickness, and the relationship between the cup's weight center and handle. Preference test were designed and tested to the users, and the results were analyzed. The results showed that to make a comfortable handle, it is important to incorporate the shape of the resting hand in the design of the handle. Specifically, the design should be such that the cup can be held comfortably. This is possible if the weight of the cup is spread evenly when several fingers are inside the handle's curve and if such factors as the hand size, the curve of the fingers, and the position that best controls the cup's weight center are carefully considered. At this time, if there is a setter for the thumb, a cup of the same weight can be lifted more lightly. In the design of such a cup, the oval line is drawn by extending the cup's handle toward the direction of the cup's body. If the cup's weight center is located on the oval line, the cup's handle may be said to be effective. In such a case, the nearer the handle is to the cup's body weight center, the less power is needed to lift the cup efficiently. Our test results can be applied as a powerful tools in design and manufacturing cups with handle in terms of artistry and functionality.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.34-64
• /
• 1989

Corner block with anchor bolt(CBA) joint method used in knock-down type table furniture manufacturing can reduce the packing and transporting cost. Unfortunately. it also has the disastrous defect to be loosend and unstable during the service life mainly due to fatigue and creep(repeated and prolonged loading). So 22 joint groups constructed were tested to evaluate the effect of some design factors related to the size of side rail(apron). block attachment to side rail. and the number of anchor bolt as well as the effect of the type of corner block(mitered type vs. rectangular type) Usable strength from the stiffness coefficients of each joint group were analysed with SPSS /PC+ and described as the criteria of CBA joint construction. The conclusions were as follows: The height of side rail(50, 75 and 100 mm) and the addition of polyvinyl acetate(PVAc) emulsion in the corner block attactment to side rail had the effect on raising the usable strength of CBA joint with remarkable high significance. And the effect of 2 - anchor bolts was also superior to that of 1 - bolt significantly. However. the thickness of side rail(22 mm vs. 25 mm) had no effect on the strengthening the table joint rigidity. Mitered type corner block joint appeared to he recommendable for CBA jointed table construction rather than the rectangular type one regardless of the method of block attachment to side rail. The best result identified from Duncan's multiple comparison was in the construction with 25 mm thick and 100 mm height of side rail fastened using 2 - anchor bolts in mitered type corner block. But it would be reasonable to use 22 mm thick & 75 mm high side rail and mitered corner block with PVAc emulsion & 2 bolts considering the productivity and production cost down in the MDF furniture manufacturing industries.