• The Korean Journal of Zoology
• /
• v.31 no.4
• /
• pp.273-282
• /
• 1988

생쥐에 PMSG와 hOG를 주사한 후 난자-난구복합체의 미세구조의 변화를 환찰함으로세 난구세포의 분산현상을 규명하고자 본 실험을 행하였다. 난자는 PMSG 주사후 48시간까지 별 다른 변화가 없었고 다만 표면막에 miGrOVilli와 Coaled pit의 수가 감소하는 경향을 보였다. 그러나 PMSG-hCG주사 12시간 후에 배란된 난자의 표면은 microvilli와 coated pit가 사라져서 평평하게 되었다. 방사관세포는 PMSG주사 48시간 후메 밀착해 있던 투명대와 간격이 생기기 시작하였고, 투명대를 통관하여 난자의 표면막과 desmosome으로 연결되어 있던 세포질돌기도 퇴화의 징후를 보였다. PMSG-hCG주사 후에는 급속히 격리, 분산되고 세포질돌기는 퇴화하였으며 dermo-some도 사라겼다. 난구세포들은 대조군에서 밀집되어 있었고 거의 gap junction으로 연결되어 있었는데, PMSG주사 24시간 후에는 모양이 등글게 되고 더욱 밀집되었으며, 48시간 후에는 거의 loose junction으로 연결되었고 분산되기 시작하였다. 결국 PMSG-hCG주사 If시간 후에는 완전히 분산되었고 거의 모두 핵응축과 괴사현상을 보였다. 난자- 난구 복합체의 분산은 배란전에 PMSG에 의하여 시작되고 hCG에 의하여 촉진 완결된다는 것이 확실하다. The ultrastructural changes of the oocyte-cumulus complexes of mouse alter injection of PMSG and hOG have been investigated in order to elucidate expansion phenomenon of the cumulus cells. The oocytes until 48 hours after PMSC injection showed no change except a tendency of decrease in numbers of microvilli and the coated pelts on surface membrane. However, surface membrane of the ovulated oocytes 12 hours after PMSC-hCC injection changed to be smooth due to disapperance of microvilli and coated pits. Corona radiate cells tightly attaching to zona pe]lucida 48 hours after PMSC injection began to be detached and their cytoplasmic processes connected by desmosome to oocyte surface membrane showed a degeneration symptom. Thereafter the detachment and degeneration were accelerated by hCG injection and followed by disappearence of desmosome. The cumulus cells in control group were compacted and connected by almost 9aP junction each another. Ite cumulus cells 24 hours after PMSG injection were changed to be round form and more tightly compacted. However, the cumulus cells 48 hours after PMSG injection were connected by almost loose junction and showed the beginning of expansion. Eventuallv, the cumulus cells 12 hours a%or PMSG-hCG injection were completely expanded, and became pvknotic and necrotic in most It is clear that the expansion of oocyte-cumulus complex were initiated by PMSC, then accelerated and completed by hCG before ovulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.263-269
• /
• 2017

A piezoelectric cantilever energy harvester (PCEH) driven in longitudinal (3-3) vibration mode was fabricated, and its electrical properties were evaluated by varying the resistive load. A commercial PZT piezoelectric ceramic with a high piezoelectric charge constant ($d_{33}$) of 520 pC/N and the interdigitated (IDT) electrode pattern was used to fabricate the PCEH driven in longitudinal vibration. The IDT Ag electrode embedded piezoelectric laminates were co-fired at $850^{\circ}C$ for 2 h. The 3-3 mode PCEH was successfully fabricated by attaching the piezoelectric laminates to a SUS304 elastic substrate. The PCEH exhibited a high output power of 3.8 mW across the resistive load of $100k{\Omega}$ at 100 Hz and 1.5 G. This corresponds to a power density of $10.3mW/cm^3$ and a normalized global power factor of $4.56mW/g^2{\cdot}cm^3$. Given the other PCEH driven in transverse (3-1) vibration mode, the 3-3 mode PCEH could be better for vibration energy harvesting applications.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.2 s.115
• /
• pp.80-98
• /
• 2006

This study originated from following questions. What can we understand the conception of deconstruction, which has been the core idea of new discourses developed in various ways since modernism? How can this question be interpreted in landscape design? What is the conceptional frame of integration the prominent hybrid post-genre movements and phenomena? The frame can be epitomized with the deconstruction phenomenon. 'Deconstruction' is the core conception appeared in late or post-modern ages in the embodiment of modernity and can be viewed as an integrating or a hybrid phenomenon between areas or genres in formative arts. Therefore, the author regards the hybrid movements widely witnessed in the post contemporary formative arts as one of the most important indicators of de-constructive signs. It is safe to say that the phenomenon of this integration or hybridism, of course, does not threaten the identity of landscape design but serves as an opportunity to extend the areas of landscape design. One of the consequences of this integration or hybridism is the voluntary participation of users who have been alienated in the production of the meanings of design works and hybrid landscape design with the hybridization of genres that is characterized with transformation in forms. This view is based on the distinction between hybridization of interactions between the designer (the subject) and the user (the object), and hybridization of synesthesia. Generally speaking, this is an act of destroying boundaries of the daily life and arts. At the same time, it corresponds to vanishing of modern aesthetics and emerging of post-contemporary aesthetics which is a new aesthetic category like sublimeness. This types of landscape design tries to restore humans' sensibility and perceptions restrained by rationality and recognition in previous approach and to express non-materialistic characteristics with precaution against excessive materialism in the modern era. In light of these backgrounds, the study aims to suggest the hybrid concept and to explorer a new landscape design approach with this concept, in order to change the design structure from 'completed' or 'closed' toward 'opened' and to understand the characteristics of interactions between users and designs. This new approach is expected to create an open-space integrating complexity and dynamics of users. At the same time, it emphasizes senses of user' body with synesthesia and non-determination. The focus is placed on user participation and sublimity rather than on aesthetic beauty, which kind of experience is called simulacre. By attaching importance to user participation, the work got free from the material characteristics, and acceptance from the old practice of simple perception and contemplation. The boundaries between the subject and object and the beautiful and ordinary, from the perspective of this approach, are vanished. Now everything ordinary can become an artistic work. Western dichotomy and discrimination is not effective any more. And there is 'de-construction' where there is perfect equality between ordinary daily life and beautiful arts. Thus today's landscape design pays attention to the user and uses newly perceived sensitivity by pursing obscure and unfamiliar things rather than aesthetic beauty. Space is accordingly defined to take place accidentally as happening and event, not as volume of shape. It's the true way to express spatiality of landscape design. That's an attempt to reject conventional concepts about forms and space, which served as the basis for landscape design, and to search for new things.

• Korean Institute of Interior Design Journal
• /
• no.14
• /
• pp.82-89
• /
• 1998

During the boom of museum building in the 1970s-80s two museum wee erected in Germany. They are James Stirling's Neue Stattsgalerie Stuttgart and hans Hollein's Stadtisches Museum Abteiberg Monchengladbach, These two museums share the folowing point of similarity : Stirling's Neue Stattsgalerie Stuttgart and Hollein's Staditisches Museum Abetiberg Monchenbladbach both manifest the conditions of the times in light of their respective cities' local characters and historical contexts without being bound to traditional formality. Stirling and Hollein attempted to grasp the meaning of the 기nuseum as a city in miniature." Taking into account the t two museums’s territorial characteristics of being situated on a slope, both Stirling and Hollein made the walker to pass t through their building complex and introduced the concept of a public square within them. As a result, the museums are not j just two large buildings but are architecture composed of a collage of various structures. S Stirling’s architecture employs the method of attaching additional elements on top of basic constituents, which is suggestive '||'&'||'#61551; of the historical fragment from Shinkel's Altes Museum. On the other hand, Hollein applies a collage-style method as if he w were doing urban planning, maintaining the distinctiveness of each of the various forms and materials of buildings. T The object style buildings of the two museums actively demonstrate the contrast of double meaning to represent the a ambiguous and multifarious characteristics of the modern times. Stirling explores the theme of opposition and coexistence in h his Neue Stattsgalerie Stuttgart by placing a series of opposing concepts, such as the past and present and histor${\gamma}$ and t technology, in one space. Thereby, the contradiction and its appeal are manifested. Hollein made use of the visual illusion and c contradiction in alluding to the irony of the modern reality induced by nature and culture and history and technology. F For the above reasons and methods, James Stirling ’ s Neue Stattsgalerie Stuttgart allowed the penetration of art into daily l life and became the general public’s favored museum for its free and unrestrained environment. Likewise, Hans Hollein’s S Stadtisches Museum Abteiberg Moncbengladbach contribute to the development of museum function as it an expression of art i in the form of a complex piece of scupture on its own.ts own.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.979-986
• /
• 2019

The purpose of this study devised a method for the examination of the images of the first and second rib fractures of the axillary using Rib Rando Phantom. The position of the phantom and the angle of the X-ray tube were changed to vertical, head 5° and foot 5°. The Radiological Technologists subjectively evaluated the acquired images and the evaluation data were analyzed by SPSS 3.0 ver. The signal to noise ratio(SNR) was calculated using the ImageJ Program. As a result, the cronbach alpha value was significantly higher at 0.789. The SNR was highest at 6.038 when the X-ray tube was tilted 5° toward the head in the front of the ribs and highest at 7.860 when the X-ray tube was tilted 5° toward the foot. Radiographic Techniques proposed axillary ribs this study are as follows. The anterior rib scan is examined by elevating the fractured area and changing the X-ray tube angle by 5° towards the head. The posterior ribs scan is examined by attaching the fractured area and changing to the X-ray tube angle by 5° towards the foot. It is considered that such an inspection method can obtain a sharp image.

• Journal of Science Education
• /
• v.38 no.1
• /
• pp.41-56
• /
• 2014

This study has developed STEAM educational program designed to cultivate topophilia using Jeonbuk educational resources and applied the program to a science camp. Topophilia is a sense of attachment and nostalgia towards one's birth place and specific objects, which can create positive affection and act as motivations for learning to the students. We developed a 32-hour STEAM program which consisted of 8 experiential activities and 2 travel programs including Gochujang, Hanok Village, a reverse ice spikes in Mai Mountain, and art works by Choi Book. In particular, we emphasized the fun of class, voluntary learning, and process of attaching significance by providing aesthetic and emotional experience of synesthesia. As a result of application, the students' level of confidence(Likert scale level 4, 2.5 points) in science and the level of interests(3.3 points) have improved. The pleasant experience of voluntary learning and active participation in class provided meaningful memories through value recognition and significance ascription. 93.3% of the students participated said they would recommend the Topophilia science camp to their peers. The level of satisfaction overall was 3.8 points(Likert scale level 5) and the program received positive evaluations that the class was fun and interesting(4.1 points).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.692-696
• /
• 2017

The shape of press components is becoming increasingly complex due to customer demands, process shortening and cost savings. In addition, the stability of the pressing process frequently varies during mass production due to the influence of many factors. In order to ensure the process stability, it is necessary to establish a process in which reproducibility is realized in tolerance, which is sufficient for advance study of shape, material, press, mold and lubrication. However, unforeseen changes in process parameters cause disruptions in production line shutdowns and production planning. In this paper, we introduce a method to monitor a real time process by applying a sensor to a press mold. A non-contact type sensor for measuring the flow of a sheet material and an example of an experiment using the optical sensor which is highly applicable to mass production are presented. An optical sensor was installed in a cylindrical drawing mold to test its potential application while changing the material, blank holder force, and drawing ratio. We also quantitatively determined that the flow of other sheet materials was quantified locally using a square drawing die and that the measured value was always smaller than the drawing depth due to the material elongation. Finally, we propose a field that can be used by attaching the sensor to the press mold. We hope that the consequent cost reduction will contribute to increasing global mold competitiveness.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.533-549
• /
• 2017

In this study, drainage systems were proposed to drain the leakage of groundwater in the existing underground concrete structures. The system consists of drainage board, wire mesh, fixed nail, and mortar with mineral. In order to increase constructability, the drainage board and wire mesh were attached on the surface of cement concrete using the air nailer and fixed nail. The mortar with 30% of blast furnace slag was sprayed on the drainage board and wire mesh using the spray mortar equipment. The field test construction was carried out in a conventional concrete lining tunnel and concrete retaining wall for performance verification of the drainage system in the field. There was no problem with performance degradation in the drainage system for three years after construction. The bond strength tests were performed on the sprayed mortar at 14 days and about 3 years after field test construction. In case of attaching the wire mesh on the drainage board, the bond strengths of the sprayed mortar were 1.04 MPa at 14 days and 1.46 MPa about 3 years. In case of the drainage board without the wire mesh, the bond strengths of the sprayed mortar were 1.13 MPa at 14 days and 0.89 MPa, less than 1 MPa of bond strength criteria, about 3 years.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.666-671
• /
• 2018

A honeycomb panel is a plate made by attaching two surface plateson eitherside of a honeycomb core. The honeycomb plate hasexcellent specific strength and energy absorption and is suitable for use in regions where good impact resistance is required. Recently, with the increasing the need for a lightweight design to facilitate transportation, numerous studies have been conducted using aluminum honeycomb plates as body materials for vehicles such as automobiles and high-speed trains. In addition, honeycomb plates have excellent sound deadening properties, as well as excellent heat insulation and durability. Savings in weight using lightweight materials such as aluminum alloy for honeycomb panel's skin can lead to increase fuel economy and reduction in air pollution. In this study, in order to improve the design technology of the honeycomb plate material, the manufacturing technology of the aluminum honeycomb core and honeycomb plate material and various mechanical properties of the honeycomb plate were evaluated. From the results, it was found that the design of the manufacturing process of the aluminum honeycomb plate, as well as itsproduction and characteristics, were improved. The resulting excellent energy absorption capability of the honeycomb plate was due to the repetitive core buckling, indicating that the higher the compressive strength, the higher the strength per bonded area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.493-503
• /
• 2018

Recently, as living standards have improved, many people are becoming more interested in health, and self-training is increasing through exercise to prevent and manage pre-illness. In general, an imbalance of muscles causes asymmetry of posture, which can cause various diseases by accompanying an adjustment force, circulation action, displacement of internal organs, etc.. In this study, the development of fitness software that can be self - training among smart wears has attracted considerable attention in recent years. In this study, a technology was proposed for the commercialization of self - trainer fitness wear by a simulation through Android - based applications. Self - trainer fitness software was developed by combining a conductive polymer, fashion design, sewing, and electric and electronic technology to monitor the unbalance of the muscles during exercise and make smart wear that can calibrate the asymmetry by oneself. In particular, a polymer sensor was fabricated by deriving the optimal MWCNT concentration, and the electrode signal was collected by attaching the electrode to the optimal position, where the electrode signal line using the conductive fiber was designed and attached to collect the signal. A signal module that converts the bio-signals collected through electrical signal conversion and transmits them using Bluetooth communication was designed and manufactured. Self-trainer fitness software that can be commercialized was developed by combining noise cancellation with Android-based self-training application using a software algorithm method.