• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.6
• /
• pp.626-629
• /
• 1991

The negative wire of an electrolytic ozone generator, proposed by authors, has been contaminated by attaching the impurity particulate in tap water, which is called BUILD-UP phenomenon. The higher applied voltage and the larger wire diameter have shown the higher build-up rate, which makes the current reducing largely and concurrently the ozone production smaller. It is found that the positive electrode of the ozone generator has a strong SELF-CLEANING effect by detaching the impurity particulate from its surface, which, however, is used us a novel means of solving the build-up problem. As a result, the build-up problem can be solved effectively by applying an alternate square wave pulse voltage to the electrodes so as to get the self-cleaning ability on the both electrodes during each of the half pulse duration time.

• Journal of architectural history
• /
• v.5 no.1 s.9
• /
• pp.18-38
• /
• 1996

Dosan Sedans was built in 1560, when Toege I Whang(1500-1571) was 60, as a place in which to study and teach disciples. The building was built to a humble 3-kan system which was a popular form of sodang in the 16th century, There found an enlargement of space by attaching outer walls around three sides which was designed by Toege himself. Minimum in space, moderation in form, conrol of embellishment, hermit scholar's aethetics became basic concept of the architecture of Dosan Sodang. After completion of sodang, Toege wrote many poems about pond, walls, flower bed and natural surroundings like sheer cliff, winding river and even rural daily life of villagers around the building. It could be sud that ,for Toege, architecture was cogniged as a whole complex of building and its surrounding natural, artificial and human circumstances.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.46-49
• /
• 1999

By attaching two metals with different thermal expansion coefficients to a fiber Bragg grating, we show that the temperature sensitivity is successfully improved to 3.3 times that of bare fiber Bragg grating and controlled by changing the metal length.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.184-189
• /
• 2000

Two types of fiber-optic sensors, EFPI(extrinsic Fabry-Perot interferometer) and FBG(fiber Bragg grating), have been investigated for measurement of thermal strain and temperature. The EFPI sensor is only for measurement of thermal strain and the FBG sensor is for simultaneous measurement of thermal strain and temperature. FBG temperature sensor was developed to measure strain-independent temperature. This sensor configuration consists of a single-fiber Bragg grating and capillary tube which makes it isolated from external strain. This sensor can then be used to compensate for the temperature cross sensitivity of a FBG strain sensor. These sensors are demonstrated by embedding them into a graphite/epoxy composite plate and by attaching them on aluminum rod and unsymmetric graphitelepoxy composite plate. All the tests were conducted in a thermal chamber with the temperature range $20-100^{\circ}C$. Results of strain measurements by fiber-optic sensors are compared with that from conventional resistive foil gauge attached on the surface.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.59-66
• /
• 2011

Recently, an UAV using green energy for propulsion has been developed due to exhaustion of fossil fuel. This aircraft runs on electric motors rather than internal combustion engines, with electricity coming from fuel cells, solar cells, ultracapacitors, and/or batteries. Especially solar cells are installed in HALE UAV and flight tests are performed in the stratosphere. Although the solar powered UAV has the advantage of zero emission, its energy conversion efficiency is low and operation time is limited. Therefore, the solar powered UAV has been designed to operate with the secondary battery obtaining flexibility of energy management. In this study, we suggest the new operational concept of the solar powered UAV using directed-energy rayed from the surface of earth to UAV. An UAV is able to secure additional power through attaching solar cell to the lower surface of elevator. As a result, the additional energy supplied by directed-energy can improve the energy management and operational flexibility of the solar powered UAV.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.658-661
• /
• 2008

Vibrations transmitted through rolling tire are major sources of road noise in vehicle interior on the range of $0{\sim}500Hz$. Among various road noises, tire cavity noise makes many problems recently. Vehicle NVH performance has improved better and road surfaces are made well. But tires are changed to high inches and low series. So tire cavity noise becomes more serious. In this paper, a designed material for reducing tire cavity noise is proposed. On the surface inside tire, this material is attached at one position using double-tape. This material disperses the pressure variations inside the tire. So a spindle forces at wheel center are reduced. And tire cavity noise at vehicle interior is also reduced. Durability is verified by tire only test and vehicle test. Noise performance also compared with peak levels after attaching this material.

• Korean Journal of Poultry Science
• /
• v.24 no.2
• /
• pp.91-95
• /
• 1997

This study was conducted to establish a colostomy technique using cannulation in white Leghorn male chicks. A everted rectum method was used for colostomy from 3 to 20 months old roosters. After 2 or 3 days of operation, blood clots were taken off. At this time, a cannula was also inserted into artificisal annus to keep it open. The cannula was regularly exchanged at every 7 to 10 days. Polyethylene bag and plastic beaker were used for feces and urine collection, respect-ively. The present paper describes the methods of operation, cannulation after colostomy recturn and post-operation management. This method has succeeded in colostomising chickens that survive as long as their normal counterparts.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.171-173
• /
• 2004

Electromagnetic force is one of the most important factor that effect on metal transfer mode, short-circuit rate, spatter generation rate and mechanical properties of weld metal etc. Also, shielding gas and welding current have influence on metal transfer mode in GMAW. In this paper, different ways for external electromagnetic forces are applied by attaching cylindrically rounded conducting wire solenoid on touch tip holding. With the applied electromagnetic field, the arc transfer mode changes from normal mode to rotating mode and spatter generation decreased in electromagnetic fields(N-pole). In MIG welding, the influences of electromagnetic force on the spatter generation showed different tendency as in the $CO_2$ welding. It is possible reasons were discussed.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.609-616
• /
• 2001

The application of microwave technology to synthesis of polymer in solvent media has been shown by the synthesis of copper phthalocyanine (CUPc). The increase of synthetic yield-was demonstrated successfully in this study. A power variable microwave synthetic system has been developed with modifying cavity of domestic microwave oven and attaching microwave power controller. The properties of the specimen synthesized at various condition under the conventional thermal processing and microwave processing has been characterized by the means of chemical analysis, X-ray diffractometry (XRD), scanning electron microscopy (SEM), and particle size analysis (PSA).

• Phonetics and Speech Sciences
• /
• v.3 no.2
• /
• pp.23-28
• /
• 2011

Electromagnetometers (EMA) have been widely used in articulatory studies as their temporal resolution can capture most speech activities and the fleshpoint information allows one to readily quantify and analyze tongue shape. However, the drawback is that the data lacks details of activity in the pharyngeal region. Several studies have attempted to estimate the unknown pharyngeal shape of the tongue, but few studies are based on unimodal data containing both front and back regions of the tongue at the same time. We use Stone's ball bearing method to obtain fleshpoint data as well as tongue shape. We further introduce a novel way of connecting balls and attaching them onto the tongue to ensure accurate tracking. An Artificial Neural Network is applied to build a map between observable flesh-points, unknown tongue shape, and pharyngeal region and is optimized to efficiently address nonlinearity.