• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.346-346
• /
• 2015

대기압 플라즈마를 이용해 methyl methacrylate($C_5H_8O_2$) 모노머를 폴리머로 합성했으며, 그 결과를 FTIR, AFM, XRD 등으로 분석하고 특성을 평가했다. FTIR의 결과, C-O, C-H, C=O 등의 피크를 확인할 수 있었다. 그리고 XRD의 관찰결과 C 1s 및 O 1s의 각 binding energy가 reference[1]에서 제시하는 것과 일치하는 것을 확인할 수 있었다. 이렇게 확인된 시료를 AFM으로 관찰한 결과 폴리머 코팅층을 확인할 수 있었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.423-424
• /
• 2002

산성비의 원인이자 주요 대기오염물질로 규제되고 있는 질소산화물은 주로 이동오염원, 발전소 및 산업시설에서 배출되고 있으며 전 세계적으로 배출 기준이 점차 강화되고 있는 추세이다. 따라서 질소산화물을 효과적으로 제어하기 위한 기술도 다양하게 연구되고 있는데, 이중 플라즈마와 촉매를 동시에 이용할 경우 상승효과가 있음이 보고된 이후 복합공정에 관한 연구가 활발하게 진행되고 있다. (중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1515-1518
• /
• 2009

Hydrophobic treatments were conducted for different kinds of substrates, glass substrate, silicon wafer and plastic substrate. Ar-$CH_4$ gas mixture was used as a discharge gas for the hydrophobic treatment. The change of the contact angle before and after treatment was measured and compared. Time evolution of the contact angle change after hydrophobic treatment was investigated.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.233.2-233.2
• /
• 2006

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.516.1-516.1
• /
• 2006

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.540-541
• /
• 2005

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.16-17
• /
• 2007

개발한 3 D 대기압 플라즈마 헤드와 그 특성 및 장단점 및 그에 의한 표면 개질 특성을 나타낸다. 플라즈마 처리 높이가 75 mm 이상의 시편도 처리할 수 있는 3 D 대기압 플라즈마 헤드를 개발하였으며, 그에 의한 신발 재료 EVA, PU, Rubber의 표면 개질 특성을 평가하였다. 또한 반도체 및 FPD 처리용 대기압 플라즈마도 개발하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.151-152
• /
• 2012

라만(Raman) 분광법은 실리콘의 결정화도를 분석하는데 가장 유용하게 쓰이는 기법이다. 본 논문에서는 상압 플라즈마 화학기상증착법 (atmospheric pressure plasma-enhanced chemical vapor deposition, AP-PECVD)에 의해 형성된 실리콘 박막의 결정화도를 라만 분광법에 의해 분석하였다. 라만 분석 시, 조사하는 레이져의 파장에 따라서 실리콘 박막 내로의 침투깊이가 결정된다. 또한 레이져의 파워가 임계점을 넘게 되면, 레이져에 의한 실리콘의 결정화가 진행되는 것을 확인하였다.

• Composites Research
• /
• v.25 no.6
• /
• pp.198-204
• /
• 2012

The objective of this study is to improve the mechanical properties in abaca fabric/epoxy composites produced using a VARTM process. The mechanical properties were improved by increasing the surface roughness of the fabric through plasma polymerization and improving the interfacial adhesion between the epoxy and the fabric through changing its hydrophilic properties to the hydrophobic properties. Plasma polymerization at atmospheric pressure and room temperature was used, and the optimal polymerization time to improve the mechanical properties was investigated. NaOH treatment on the fabric was also carried out for the comparison. The composite fabricated using the fabric polymerized for 10 seconds shows the highest tensile strength compared to that of none-polymerized or NaOH treated. Plasma polymerization for more than 20 seconds exhibits decrease in the tensile strength. As a result, the plasma polymerization for more than 20 seconds may have caused some damages on the surface of the fabrics. Also, the hydrophilic abaca represents a tendency of presenting the hydrophobic properties in absorption and sedimentation tests.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.386-391
• /
• 2014

Atmospheric-pressure nonthermal corona discharge plasma was applied to the sterilization of biologically contaminated scoria powder. Escherichia coli (E. coli) culture solution was uniformly sprayed throughout the scoria powder for artificial inoculation, which was well mixed to ensure uniformity of the batch. The effect of the key parameters such as discharge power, treatment time, type of gas and electrode distance on the sterilization efficiency was examined and discussed. The experimental results revealed that the plasma treatment was very effective for the sterilization of scoria powder; 5-min treatment at 15 W could sterilize more than 99.9% of E. coli inoculated into the scoria powder. Increasing the discharge power, treatment time or applied voltage led to an improvement in the sterilization efficiency. The effect of type of gas on the sterilization efficiency was in order of oxygen, synthetic air (20% oxygen) and nitrogen from high to low. The inactivation of E. coli under the influence of corona discharge plasma can be explained by cell membrane erosion or etching resulting from UV and reactive oxidizing species (oxygen radical, OH radical, ozone, etc.), and the destruction of E. coli cell membrane by the physical action of numerous corona streamers.