• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1533_1534
• /
• 2009

This paper presents an atmospheric micro glow plasma-jet device. The device consists of four components; a thin Ni anode, a porous alumina insulater, a stainless steel cathode and an aluminum case. The Ni anode is fabricated using micromachining technology. The anode has 10 holes, of which the hole diameter and the depth are $250{\mu}m$ and $60{\mu}m$, respectively. The discharge test is performed in nitrogen gas at atmospheric pressure for 20 kHz AC bias. The breakdown voltage is 3.5 kV at gas flow rate of 4 L/min and the the plasma-jet is blown out to ambient at 5.5 kV. In order to verify the characteristics of plasma, the current and the voltage of device are measured. The maximum temperature of plasma is $37^{\circ}C$. The plasma is well generated and stable at high voltage.

• 한국대기환경학회지
• /
• 제24권3호
• /
• pp.329-335
• /
• 2008

Volatile organic compounds emitted to the atmosphere can cause adverse effects on human health and participate in photochemical smog formation reactions. The destruction of a series of VOCs has been carried out by non-thermal plasma in other researches. And the characteristic of non-thermal plasma was operated at atmospheric pressure and low temperature. A new type non-thermal plasma reactor was investigated combined Glidarc plasma with water jet in this research. Also, it was found that the water-jet had an significant effect on the toluene removal efficiency. But too much water content does not favor toluene decomposition by decreasing of reaction temperature. The input toluene concentration, gas flow rate, water flow rate and specific energy input were used as experiment variables. The toluene removal efficiency, energy efficiency and specific energy input were 75.3%, 146.6 g/kWh and $1.12kWh/m^3$ at a water flow rate of 100 mL/min.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.9-17
• /
• 2020

In this study, the surface changes of titanium alloy using laser surface treatment and the surface analysis using laser-induced plasma spectroscopy were carried out. The laser surface treatment induced changes in surface roughness and the diffusion of atmospheric elements. Excessive melting or less melting caused roughness changes, but when moderate levels of energy were applied, a smoother surface could be obtained than the initial surface. In the process, the diffusion of atmospheric elements took place. To analyze the diffusion of atmospheric elements with respect to surface morphology, the surfaces were re-shaped with grinding. In this experimental conditions, the effect of plasma formation by surface roughness was identified. Compensated plasma signals for the material properties were obtained and analysed by removing the background plasma signal.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1869-1873
• /
• 2008

In this work, to make it possible to generate glow discharge in atmospheric pressure condition with relatively high and wide electric field, micro channel reactor is proposed. Si DRIE and Cr deposition by Ebeam evaporation is used to make channel and bottom electrode layer. Upper electrode is made from ITO glass to visualize discharge within micro channel. Fabricated reactor is verified by generating uniform glow plasma with N2 / He gases each as working fluid. The range of gas electric field to generate glow plasma is from about 200 V/cm and upper limit is not observed in tested condition of up to 150 kV/cm. This data shows that micro channel plasma reactor is more versatile. Indirect estimation of electron temperature in this reactor can be inferred that the electron temperature within glow discharge in micro reactor lies $0{\sim}2eV$. This research demonstrates that the reactor is appropriate in application that needs to maintain low temperature condition during chemical process.

• International Journal of Oral Biology
• /
• 제40권4호
• /
• pp.167-173
• /
• 2015

The purpose of this study was to investigate the antibacterial effect of the low temperature atmospheric plasma device with needle tip designed for easy approach to the oral cavity and root canal against Streptococcus mutans, Enterococcus faecalis and Candida albicans. The antibacterial activities evaluated by measuring clear zone of agar plate smeared with each bacteria after plasma treatment. To quantify antibacterial effects, dilution plate method was used. In addition, scanning electron microscope (SEM) was used for observation of changes in bacterial morphology. As treatment time of plasma increased, the clear zone was enlarged. The death rate was more than 99%. The SEM results showed that the globular shape of bacteria was distorted. These results suggest that needle tip plasma could be an innovative device for prevention of dental caries, and treatment of apical infection and soft tissue diseases.

• Journal of Microbiology and Biotechnology
• /
• 제14권1호
• /
• pp.188-192
• /
• 2004

The main aim of this study was to investigate the sterilization effects of microwave-induced argon plasma at atmospheric pressure on paper materials contaminated with fungi. Plasma-treated filter papers showed no evidence to an unaided eye of burning or paper discoloration due to the plasma treatment. All fungi were perfectly sterilized in less than 1 sec, regardless of strains. These results indicate that this sterilization method for paper materials is easy to use, requires significantly less time than other traditional methods and different plasma sterilization methods, and is also nontoxic.

• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.624-632
• /
• 2010

Perfluorocarbons (PFCs) are widely used in semiconductor industry. These gases need to be removed efficiently because of their strong absorption of infrared radiation and long atmospheric lifetimes which cause the global warming effect. To destruct $CF_4$, a waterjet gliding arc plasma was designed and manufactured. The highest $CF_4$ destruction showed at waterjet plasma case, compared to plasma discharge only or water scrubber only, respectively. In addition, it could be known that the $CF_4$ destruction should be associated with the electron and OH radicals. The operating conditions such as waterjet flow rate, initial $CF_4$ concentration, total gas flow rate, specific energy input were investigated experimentally using a plasma waterjet scrubber. Through the parametric studies, the highest $CF_4$ destruction of 94.5% was achieved at 0.2% $CF_4$, 2.1 kJ/L SEI, 20 L/min total gas flow rate and 18.5 mL/min waterjet flow rate.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.835-839
• /
• 2011

토치형 상압 플라즈마 반응기를 통한 방전 및 플라즈마 flame에 대한 분석과 발생된 플라즈마 현상을 이용하여 E. coli에 대한 살균효과를 측정하였다. 상압 플라즈마 반응기를 통해 나오는 플라즈마 flame의 길이는 입력전압, 반응기의 유량 그리고 아르곤/산소 혼합기체에서의 산소비율에 영향을 크게 받았다. 플라즈마 flame에 의한 가열효과는 10분 조사 후에도 $43^{\circ}C$ 미만으로 저온처리가 가능했다. E. coli에 대한 살균처리에서 입력전압의 증가, 아르곤/산소 혼합기체에서의 산소비율 증가 그리고 플라즈마 flame에 대한 노출시간의 증가에 따라 전체적인 살균효과를 향상되었다. 플라즈마 처리 시에 오존농도가 높은 공정조건에서 플라즈마 flame의 직접적인 접촉시간을 증가시키면 살균효과를 극대화할 수 있다.

• 한국진공학회지
• /
• 제10권4호
• /
• pp.411-415
• /
• 2001

대기압 저온 플라스마를 사용하여 산화아연 박막의 건식 식각 가능성을 연구했다. 플라스마로부터 $H_\alpha^*$과 $CH_^*$ 라디컬 발생을 확인하였고, 라디컬 발생 능력은 광학 발광 스펙트럼 및 플라스마 임피던스 분석에 의해 캐소드 전극에 의존하는 것을 알았다. 식각능력은 플라스마 I-V커브에 의한 임피던스와 발광강도에 의해 계산되었다.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.113-120
• /
• 2005

Helium-oxygen plasma treatments were conducted to modify poly(trimethylene terephthalate) (PIT) and poly(ethylene terephthalate) (PET) warp knitted fabrics under atmospheric pressure. Lubricant and contamination removals by plasma etching effect were examined by weight loss $(\%)$ measurements and scanning electron microscopy (SEM) analysis. Surface oxidation by plasma treatments was revealed by x-ray photoelectron spectroscopy (XPS) analyses, resulting in formation of hydrophilic groups and moisture regain $(\%)$ enhancement. Low-stress mechanical properties (evaluated by Kawabata evaluation system) and bulk properties (air permeability and bust strength) were enhanced by plasma treatment. Increasing interfiber and interyarn frictions might play important roles in enhancing surface property changes by plasma etching effect, and then changing low-stress mechanical properties and bulk properties for both fabrics.