• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.262-267
• /
• 2009

Selective laser sintering is a kind of rapid prototyping process whereby a three-dimensional part is built layer wise by laser scanning the powder. This process is highly influenced by powder and laser parameters such as laser power, scan rate, fill spacing and layer thickness. Therefore a study on fabricating Fe-Ni-Cr powder by selective laser sintering has been performed. In this study, fabrication was performed by experimental facilities consisting of a 200W fiber laser which can be focused to 0.08mm and atmospheric chamber which can control atmospheric pressure with argon. With power increase or energy density decrease, line width was decreased and line surface quality was improved with energy density increase. Surface quality of quadrangle structure was improved with fill spacing optimization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.476-476
• /
• 2012

Although plasma is an efficient means of microbial sterilization, mechanism of plasma effect on microorganisms still needs to be clarified. In addition, a limited number of studies are available on eukaryotic microorganisms such as yeast and fungi in relation to plasma application. Thus, we investigated cellular and molecular aspects of plasma effects on a filamentous fungus, Neurospora crassa by making use of argon plasma jet at atmospheric pressure. The viability and cell morphology of N. crassa spores exposed to plasma were both significantly reduced depending on the exposure time when treated in water. The intracellular genomic DNA content was dramatically reduced in fungal tissues after a plasma treatment and the transcription factor tah-3 was found to be required for fungal tolerance to a harsh plasma environment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.665-674
• /
• 2000

A major source of the hazardous waste generated is from chemical industries producing plastics, herbicides, pesticides and chlorinated solvents. All of these processes produce a class if hazardous waste termed the chlorinated hydrocarbons(CHCs), either directly or from undesirable side reactions. In this study, we investigated the destruction characteristics of hazardous waste through incineration. A nonequilibrium combustion model was used to describe the effect of the chemical kinetics due to the flame inhibition characteristics of $CCl_4$ which was used as the surrogate of hazardous waste. A parametric screening studies was made in a dump incinerator proposed in this study. The dump incinerator showed high $CCl_4$ DRE(Destruction and Removal Efficiency) as 5 nines. $CCl_4$/CH$_4$ ratio appeared to be most important in the destruction of $CCl_4$ through incineration.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.261-266
• /
• 1998

Recently, air pollution is increased according to increase of vehicle. So many countries are studying about DOC for diesel emission decrease. However, there are many difficulty in applying to DOC . In this study, SOx exhaust gas equipped with DOC was studied and we obtained several test results as following. First, in diesel oxidation catalyst, additives such as Pt is very effective for 503 and sulfate. Second, the oxidative activity for 502 has decreased to add such as Pt and the decrease of 502 is effect for the reduction of PM in high temperature . And finally, in high temperature, concentration of SOx is increased and temperature is affected by process from SOB to 503, whereas engine performance and fuel consumption are not affected by equipped DOC.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.4
• /
• pp.297-305
• /
• 1997

The experimental study by use of SPCP was fulfilled to remove toluene emitted from various industrial processes. First of all, discharge characteristic was experimented as the change of applied voltage and frequency. Then toluene removal characteristic was tested with the analysis of by-products. As a result, optimum electrical discharge condition was from 20.0 kHz to 25.0 kHz of frequency and from 3.5 kV to 4.0 kV of voltage range. The variation of applied voltage had a more important effect on the removal characteristic of toluene than the frequency variation. The toluene removal efficiency was proportioned to ozone concentration and retention time on discharge plate. It was dropped as increase of toluene concentration, but total treated volume of tolene per power consumption was high. The decomposed toluene was transformed to $CO, CO_2$ and particulates, and the rate of transformation to particulates was higher than CO and $CO_2$ at high toluene concentration. Particulates were increased from 0.017 $\mum$ to 0.3 $\mum$ range of size distribution.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.201-210
• /
• 1999

Cyclones have been extensively used in the industry for removing fine particles from the gaseous streams, based on simplicity in design and construction in association with low cost and flexibility to operate in extreme and harsh environments. However, industrial cyclones are typically not very efficient for particles smaller than 10μm. In this work, in order to improve the separation efficiency of reverse flow cyclones, a simple device named Post Cyclone(Poc) in installed on the top of an existing cyclone. Thereby the residual swirl present at the outlet (vortex finder) of a conventional cyclone has been used to capture the escaped dust from the cyclone in the PoC. The performance of PoC was closely evaluated by changing configuration of the PoC and operation condition. In addition, the dust behaviour in th PoC was investigated based on the hypothesis of residual vortex.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.2
• /
• pp.128-137
• /
• 1992

Sulfur dioxide distributions in the Seoul area in 1988 were reproduced by using ISCLT which was the most versatile model among the preferred models recommended by USEPA. Modeling was performed season by season in order to take into account distinct four seasons in Korea. Predicted concentrations were close to the observed ones in most regions, but were different from the observed ones in such regions where the effect of sources outside the Seoul area was important. For better results of the modeling, the modeling domain should be chosen after a careful examination of principal wind directions.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.3
• /
• pp.272-283
• /
• 2003

Mild steel and zinc specimens were tested in five atmospheric testing sites of Vietnam in order to collect the corrosion databank as well as to study the corrosion mechanism in tropical conditions, in period of 1997-2000. The results obtained showed that the corrosion rate of steel is in the range of $10-50\;{\mu}m/year$ and of zinc is of $1-5\;{\mu}m/year$. They are interpretable in the comparison with the data obtained in different countries in the South East Asian as well as previous reports of Vietnamese nation project In atmospheric corrosion. The main factors affecting the corrosion in Vietnam tropical conditions are TOW (time of wetness) and salinity. The relationship between sulfur dioxide and corrosion of metals, particularly, zinc was not found clearly. An explanation was suggested about the complex effect of different pieces present in tropical atmosphere and about the alternative of the dominant factors such as humidity, salinity or temperature.

• Journal of The Korean Astronomical Society
• /
• v.26 no.1
• /
• pp.65-72
• /
• 1993

Using the Daeduk Radio Telescope, we have observed $J=1\rightarrow0$ transitions of 1$^{12}CO,\;^{13}CO\;and\;C^{18}O$ toward OMC-l. The column densities of $1\~5\times10^{17}\;cm^{-2}\;and\;1\~3\times10^{16}\;cm^{-2}$ have been derived, for $^{13}CO$ and $C^{18}O$, respectively, in the $11'\times11'$ region centered at Orion - KL. The double isotope ratio $[^{13}CO]/[C^{18}O]$ was found to be larger than the cosmic abundance ratio by factors of $2\~10$ which may result from the chemical fractionation effect.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E3
• /
• pp.117-124
• /
• 2001

The present paper examined the kinetics of photocatalytic degradation of volatile organic compounds (VOCs) including gaseous trichloroethylene (TCE) and acetone. In this study, we examined the effects of the initial concentration of VOCs and the light intensity of ultra-violet (UV). A batch photo-reactor was specifically designed for this work. The photocatalytic degradation rate increased with the initial concentration of VOCs but remained almost constant beyond a certain concentration. It matched well with the Langmuir-Hinshelwood (L-H) kinetic model. When the effect of light intensity was concerned, it was found that photocatalytic degradation occurs in two regimes with respect to light intensity.