• Title/Summary/Keyword: Atmospheric Effect

Search Result 1,587, Processing Time 0.03 seconds

Effect of Soil Moisture and Weather (atmospheric) Conditions on the Fruiting of Sarcodon aspratus in Oak Stand (토양수분과 가상인자가 참나무림내 능이의 발생에 미치는 영향)

  • Lee, Sang-Hee;Kim, Je-Su;Kim, Hong-Eun;Koo, Chang-Duck;Park, Jae-In;Shin, Chang-Sop;Shin, Won-Sop
    • Journal of Korean Society of Forest Science
    • /
    • v.94 no.6
    • /
    • pp.370-376
    • /
    • 2005
  • Sarcodon aspratus is well known as a natural edible mushroom and a symbiotic mycorrhizal fungus with oaks. This study was conducted to clarify the effects of environmental conditions on the fruiting of S. aspratus on the hillslope of Wolak Mt., Jecheon city, Chungbuk, South Korea. Soil moisture and soil temperature in S. aspratus colony were measured hourly and compared with those in the non-colony soil. The mean soil moisture during the mushroom development was 14.3% in the colony soil and 16.4% in the non-colony soil. The S. aspratus colony soils showed 2.1% less soil moisture. The mean soil temperature was $16.8^{\circ}C$ in the colony soil and $16.5^{\circ}C$ in the non-colony soil. The S. asprauts colony soils showed slightly higher temperature. It is considered that more soil water was consumed and more energy was emitted during the mycelial elongation and the mushroom development. The development of S. aspratus seems similar to that of T. matsutake which is known to be considerably affected by soil moisture, daily maximum air temperature, daily minimum air temperature and daily minimum soil temperature. The season of S. aspratus development ranges from the end of August to the beginning of October. And Ellino phenomenon and its unusual change in the weather seems to affect primodia and fruiting body development. Especially if daily minimum soil temperature continues to become higher than $20^{\circ}C$, the damage of primodia and its fruiting body was frequently observed in the field plots during the last few years recently.

Simulation of the Ocean Circulation Around Ulleungdo and Dokdo Using a Numerical Model of High-Resolution Nested Grid (초고해상도 둥지격자 수치모델을 이용한 울릉도-독도 해역 해양순환 모의)

  • Kim, Daehyuk;Shin, Hong-Ryeol;Choi, Min-bum;Choi, Young-Jin;Choi, Byoung-Ju;Seo, Gwang-Ho;Kwon, Seok-Jae;Kang, Boonsoon
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.32 no.6
    • /
    • pp.587-601
    • /
    • 2020
  • The ocean circulation was simulated in the East Sea and Ulleungdo-Dokdo region using ROMS (Regional Ocean Modeling System) model. By adopting the East Sea 3 km model and the HYCOM 9 km data, Ulleungdo 1 km model and Ulleungdo-Dokdo 300 m model were constructed with one-way grid nesting method. During the model development, a correction method was proposed for the distortion of the open boundary data which may be caused by the bathymetry data difference between the mother and child models and the interpolation/extrapolation method. Using this model, a super-high resolution ocean circulation with a horizontal resolution of 300 m near the Ulleungdo and Dokdo region was simulated for year 2018. In spite of applying the same conditions except for the initial and boundary data, the numerical models result indicated significantly different characteristics in the study area. Therefore, these results were compared and verified by using the surface current data estimated by satellites altimeter data and temperature data from NIFS (National Institute of Fisheries Science). They suggest that in general, the improvement of the one-way grid nesting with the HYCOM data on RMSE, Mean Bias, Pattern correlation and Vector correlation is greater in 300 m model than in the 1 km model. However, the nesting results of using East Sea 3 km model showed that simulations of the 1 km model were better than 300 m model. The models better resolved distinct ridge/trough structures of isotherms in the vertical sections of water temperature when using the higher horizontal resolution. Furthermore, Karman vortex street was simulated in Ulleungdo-Dokdo 300 m model due to the terrain effect of th islands that was not shown in the Ulleungdo 1 km model.

1H Solid-state NMR Methodology Study for the Quantification of Water Content of Amorphous Silica Nanoparticles Depending on Relative Humidity (상대습도에 따른 비정질 규산염 나노입자의 함수량 정량 분석을 위한 1H 고상 핵자기 공명 분광분석 방법론 연구)

  • Oh, Sol Bi;Kim, Hyun Na
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.34 no.1
    • /
    • pp.31-40
    • /
    • 2021
  • The hydrogen in nominally anhydrous mineral is known to be associated with lattice defects, but it also can exist in the form of water and hydroxyl groups on the large surface of the nanoscale particles. In this study, we investigate the effectiveness of 1H solid-state nuclear magnetic resonance (NMR) spectroscopy as a robust experimental method to quantify the hydrogen atomic environments of amorphous silica nanoparticles with varying relative humidity. Amorphous silica nanoparticles were packed into NMR rotors in a temperature-humidity controlled glove box, then stored in different atmospheric conditions with 25% and 70% relative humidity for 2~10 days until 1H NMR experiments, and a slight difference was observed in 1H NMR spectra. These results indicate that amount of hydrous species in the sample packed in the NMR rotor is rarely changed by the external atmosphere. The amount of hydrogen atom, especially the amount of physisorbed water may vary in the range of ~10% due to the temporal and spatial inhomogeneity of relative humidity in the glove box. The quantitative analysis of 1H NMR spectra shows that the amount of hydrogen atom in amorphous silica nanoparticles linearly increases as the relative humidity increases. These results imply that the sample sealing capability of the NMR rotor is sufficient to preserve the hydrous environments of samples, and is suitable for the quantitative measurement of water content of ultrafine nominally anhydrous minerals depending on the atmospheric relative humidity. We expect that 1H solid-state NMR method is suitable to investigate systematically the effect of surface area and crystallinity on the water content of diverse nano-sized nominally anhydrous minerals with varying relative humidity.

An Economic Value for the First Precipitation Event during Changma Period (장마철 첫 강수의 경제적 가치)

  • Seo, Kyong-Hwan;Choi, Jin-Ho
    • Atmosphere
    • /
    • v.32 no.1
    • /
    • pp.61-70
    • /
    • 2022
  • This study evaluates the economic values for the several first precipitation events during Changma period. The selected three years are 2015, 2019, and 2020, where average precipitation amounts across the 58 Korean stations are 12.8, 20.1 and 13.3 mm, respectively. The four categories are used to assess the values including air quality improvement, water resource acquisition/accumulation, drought mitigation, and forest fire prevention/recovery. Economic values for these three years are estimated 50~150 billion won. Among the four factors considered, the effect of air quality improvement is most highly valued, amounting to 70 to 90% of the total economic values. Wet decomposition of air pollution (PM10, NO2, CO, and SO2) is the primary reason. The next valuable element is water resource acquisition, which is estimated 9~15 billion won. Effects of drought mitigation and fire prevention are deemed relatively small. This study is the first to estimate the value of the precipitation events during Changma onset. An analysis for more Changma years will be performed to achieve a more reliable estimate.

Impact of East Asian Summer Atmospheric Warming on PM2.5 Aerosols (동아시아 지역의 여름철 온난화가 PM2.5 에어로졸에 미치는 영향)

  • So-Jeong Kim;Jae-Hee Cho;Hak-Sung Kim
    • Journal of the Korean earth science society
    • /
    • v.45 no.1
    • /
    • pp.1-18
    • /
    • 2024
  • This study analyzed the effect of warming on PM2.5 aerosol production in mid-latitude East Asia during June 2020 using PM2.5 aerosol anomalies, which were identified by incorporating meteorological and climate data into the Weather Research Forecasting model coupled with Chemistry (WRF-Chem) model. The decadal temperature change trend over a 30-year period (1991-2020) in East Asia showed that recent warming has been greater in summer than in winter. Summer warming in East Asia generated low and high pressure in the lower and upper troposphere, respectively, over China. The boundary between the lower tropospheric low and upper tropospheric high pressure sloped along the terrain from the Tibetan Plateau to Korea. The eastern China, Yellow Sea, and Korean regions experienced a convergence of warm and humid southwesterly airflows originating from the East China Sea with the development of a northwesterly Pacific high pressure. In June 2020, the highest temperatures were observed since 1973 in Korea. Meanwhile, enhanced warming in East Asia increased the production of PM2.5 aerosols that travelled long distances from eastern China to Korea. PM2.5 anomalies, which were derived solely by inputting meteorological and climatic data (1991-2020) into the WRF-Chem model and excluding emission variations, showed a positive distribution extending from eastern China to South Korea across the Yellow Sea as well as over the Pacific Northwest. Thus, the contribution of warming to PM2.5 aerosols in East Asia during June 2020 was more than 50%. In particular, PM2.5 aerosols were transported from eastern China to Korea through the Yellow Sea, where the warm and humid southwesterly airflows implied wet scavenging of sulfate but promoted nitrate production.

A Study on the Timing of Spring Onset over the Republic of Korea Using Ensemble Empirical Mode Decomposition (앙상블 경험적 모드 분해법을 이용한 우리나라 봄 시작일에 관한 연구)

  • Kwon, Jaeil;Choi, Youngeun
    • Journal of the Korean Geographical Society
    • /
    • v.49 no.5
    • /
    • pp.675-689
    • /
    • 2014
  • This study applied Ensemble Empirical Mode Decomposition(EEMD), a new methodology to define the timing of spring onset over the Republic of Korea and to examine its spatio-temporal change. Also this study identified the relationship between spring onet timing and some atmospheric variations, and figured out synoptic factors which affect the timing of spring onset. The averaged spring onset timing for the period of 1974-2011 was 11th, March in Republic of Korea. In general, the spring onset timing was later with higher latitude and altitude regions, and it was later in inland regions than in costal ones. The correlation analysis has been carried out to find out the factors which affect spring onset timing, and global annual mean temperature, Arctic Oscillation(AO), Siberian High had a significant correlation with spring onset timing. The multiple regression analysis was conducted with three indices which were related to spring onset timing, and the model explained 64.7%. As a result of multiple regression analysis, the effect of annual mean temperature was the greatest and that of AO was the second. To find out synoptic factors affecting spring onset timing, the synoptic analysis has been carried out. As a result the intensity of meridional circulation represented as the major factor affect spring onset timing.

  • PDF

Utility of Climate Model Information For Water Resources Management in Korea

  • Jeong, Chang-Sam
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.6
    • /
    • pp.37-45
    • /
    • 2008
  • It is expected that conditions of water resources will be changed in Korea in accordance with world wide climate change. In order to deal with this problem and find a way of minimizing the effect of future climate change, the usefulness of climate model simulation information is examined in this study. The objective of this study is to assess the applicability of GCM (General Circulation Model) information for Korean water resources management through uncertainty analysis. The methods are based on probabilistic measures of the effectiveness of GCM simulations of an indicator variable for discriminating high versus low regional observations of a target variable. The formulation uses the significance probability of the Kolmogorov-Smirnov test for detecting differences between two variables. An estimator that accounts for climate model simulation and spatial association between the GCM data and observed data is used. Atmospheric general circulation model (AGCM) simulations done by ECMWF (European Centre for Medium-Range Weather Forecasts) with a resolution of $2^{\circ}{\times}2^{\circ}$, and METRI (Meteorological Research Institute, Korea) with resolutions of $2^{\circ}{\times}2^{\circ}$ and $4^{\circ}{\times}5^{\circ}$, were used for indicator variables, while observed mean areal precipitation (MAP) data, discharge data and mean areal temperature data on the seven major river basins in Korea were used for target variables. The results show that GCM simulations are useful in discriminating the high from the low of the observed precipitation, discharge, and temperature values. Temperature especially can be useful regardless of model and season.

Effect of Atmospheric Hydrogen Pressure on Mg2NiHx synthesis (Mg2NiHx 수소저장합금 합성에 미치는 분위기 수소압의 영향)

  • Hong, Tae Whan;Lim, Jae Won;Kim, Shae Kwang;Kim, Young Jig;Park, Hyun Soon
    • Journal of Hydrogen and New Energy
    • /
    • v.10 no.1
    • /
    • pp.27-40
    • /
    • 1999
  • By hydrogen induced planetary ball milling process, $Mg_2NiH_x$ hydrogen absorbing materials were successfully alloyed mechanically at room temperature, using pure Mg and Ni chips. The Mg & Ni chips were mixed by 45:55 weight ratio and Mechanical Alloying(M.A.) was carried out : the hydrogen pressure induced in the jar was varied from 1 to 20 bars and the M.A. times were 24 and 48 hours. The XRD results revealed that the homogeneous $Mg_2NiH_x$ was incresed with the hydrogen pressure increasing, and that $MgH_x$ was detected by unalloyed Ni chips. The shape and size of the mechanically alloyed particles didn't depend on the induced hydrogen pressure. The results of TGA showed that the hydrogen quantities of $Mg_2NiH_x$ has 1.1~3.9 wt%.

  • PDF

Effect of Surfactant Solution pH on Surfactant-Assisted Remediation (계면활성제를 이용한 오염복원에 있어서 계면 활성제 용액 pH의 효과)

  • Dal-Heui Lee;Rovert D. Cody
    • Economic and Environmental Geology
    • /
    • v.34 no.3
    • /
    • pp.301-306
    • /
    • 2001
  • Column tests were conducted to investigate the optimal condition of surfactant solution pH that can affect the removal efficiency in surfactant-assisted remediation. Toluene and 1,2,4-trichlorobenzene were chosen as the model hydrophobic substances. Two Iowa soils, Fruitfield sand and Webster clay loam, were leached with solutions of 4%(v/v) sodium diphenyl oxide disulfonate (DOSL, trade name Dowfax 8390), or 4%(v/v) trideceth-19-carboxylic acid (TDCA, trade name Sandopan JA36), or 4% (v/v) octylphenoxypoly ethoxyethanol (OPEE, trade name Triton X100). The test results revealed that a maximum removal of toluene and 1,2,4-trichlorobenzene was obtained at pH 10 of surfactant solution, and maximum recoveries of added toluene (94%) or 1 ,2,4- trichlorobenzene (97 %) were obtained for DOSL surfactant solution in Fruitfield sandy soil column. Increased removal efficiency by pH control of both toluene and 1,2,4trichlorobenzene was 16% and 20% for DOSL with Fruitfild sandy soil, respectively. In addition, the maximum recoveries of added toluene or I ,2,4-trichlorobenzene were 89% and 93% for DOSL surfactant solution in Webster clay loam soil column. The maximum increase of toluene and 1,2,4-trichlorobenzene removal was 26% and 19% for DOSL with Webster clay loam soil, respectively. These experimental results indicate that maintaining a high pH surfactant solution in surfactant-assisted remediation is desirable for efficient removal of NAPLs from contminated soils.

  • PDF

Effect of Heat, Pressure, and Acid Treatments on DNA and Protein Stability in GM Soybean (GM 콩 DNA와 단백질의 안정성에 대한 열, 압력 및 산 처리의 영향)

  • Pack, In-Soon;Jeong, Soon-Chun;Yoon, Won-Kee;Park, Sang-Kyu;Youk, Eun-Soo;Kim, Hwan-Mook
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.4
    • /
    • pp.677-682
    • /
    • 2004
  • Debates on safety of genetically modified (GM) crops have led to mandatory-labeling legislation of GM foods in many countries including Korea. Effects of heat, pressure, and acid treatments on degradation of DNAs or proteins in GM soybean at levels below detection limits of qualitative PCR and lateral flow strip test (LFST) methods were examined. Results showed that genomic DNAs and proteins were degraded into fragment sizes no longer possible for detection of inserted gene depending on thermal, or thermal and pressure treatment period. Detectaability of LFST for toasted meal increased in weakly treated soybean. DNA and protein detection methods were barely effective for detection of GM ingredient after $121^{\circ}C$ and 1.5 atmospheric treatment for 20 min. These results will be useful in determining GM labeling requirements of processed foods.