• Journal of ILASS-Korea
• /
• v.12 no.3
• /
• pp.154-159
• /
• 2007

Spray tip penetration and spray angle for one main injection were measured at the atmospheric condition with the fuel injection pressure of 270 bar and 540 bar. It investigates an effect of different nozzle hole geometry of conventional cylindrical one and those of elliptical ones. Injection period represented by injector pulse drive was fixed at 1ms. From the result of this study, it is shown that spray tip penetration becomes shorter and spray angle becomes wider with the elliptical nozzle hole geometry due to fast break-up of a fuel liquid column.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.107-107
• /
• 1999

Direct-contact condensation experiments of atmospheric steam and steam/air mixture on subcooled water flowing co-currently in a rectangular channel are carried out uszng an infrared thermal camera system to develop a temperature measurement method. The inframetrics Model 760 Infrared Thermal Imaging Radiometer is used for the measurement of the temperature field of the water film for various flow conditions. The local heat transfer coefficient is calculated using the bulk temperature gradient along the (low direction. It is also found that the temperature profiles can be used to understand the interfacial condensation heat transfer characteristics according to the flow conditions such as noncondensable gas effects, inclination effect, and flow rates.

• Corrosion Science and Technology
• /
• v.5 no.6
• /
• pp.206-212
• /
• 2006

The effects of sub-ppm levels of $H_2S$ and the adsorbed water on the atmospheric corrosion of silver were studied with In situ weight balance to study the effect of the adsorbed water on the kinetic behavior and to determine the rate-controlling step, with XPS to analyze the tarnish film, and with calculation of phase equilibrium to predict the stable solid phase, the concentrations of dissolved species ($Ag^-$, $H^+$, $S^{2-}$, $HS^-$) and the equilibrium potentials ($E_{Ag^+/Ag}$, $E_{H^+/H_2}$, $E_{O_2/O^{2-}$). The results of weight measurements showed that oxygen was required for the sulfidation of silver in 100 ppb $H_2S$ and humidified environments enhanced the tarnished rate and oxidizing power. In addition, the rate determining step for tarnishing silver was shown to be changed to transport though the tarnish film.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.78-79
• /
• 2001

노광 후 지연(Post Exposure Delay： PED) 효과는 그림 1과 같이 노광 후 지연 시간에 따른 감광제의 Profile에 thinning, T-top, foot, undercut 를 보여주는 현상으로 화학 증폭형 감광제(Chemically Amplified Resist, CAR) 개발에 있어 PED의 안정성은 중요한 요소이다(1). 따라서 노광후 지연 효과에 대한 모델링은 연구와 개발을 위한 시뮬레이션 tool에 있어 매우 의미 있는 일이다. T-top 이나 undercut 를 형성하는 Surface inhibition layer(SIL) 은 노광 후 지연시 발생되는 environmental base contamination, acid evaporation 이 주요 원인이며 다른 원인으로는 감광제 속에서 acid migration, spin coating 동안에 photoacid generator (PAG)의 고갈, internal basic impurities 이며 그 외에 nonbsic atmospheric contamination, high power laser source의 영향 등이 있다. (중략)

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.585-595
• /
• 2001

A series of experiments have been carried out to investigate the effects of non-condensable gas on the direct contact film condensation of vapor mixture under an adiabatic wall condition. The average heat transfer coefficient of the direct contact condensation was obtained at the atmospheric pressure with four main parameters ; air-mass fraction, mixture velocity, film Reynolds number, and the degree of water film subcooling having an influence on the condensation heat transfer coefficient. With the analysis of 88 experiments, a correlation of the average Nusselt number for direct contact film condensation of steam/air mixture at an adiabatic vertical wall was proposed as functions of film Reynolds number, mixture Reynolds number, air mass fraction, and Jacob number. The average heat transfer coefficient for steam/air mixture condensation decreased significantly while air mass fraction increased. The average heat transfer coefficients also decreased as the Jacob number increased, and were scarcely affected by the film Reynolds number below a mixture Reynolds number of about 245,000.

• Environmental and Resource Economics Review
• /
• v.11 no.4
• /
• pp.557-579
• /
• 2002

In recent days, it has been significantly suggested that the promotion of sustainable forest management will play an important role in ameliorating atmospheric carbon. In this respect, we intend to investigate the dynamic impact of the global timber market on carbon flux of forest through net carbon release into the atmosphere. For this purpose, we integrated the TSM 2000 with TCM to simulate the projection of net carbon release of the global timber market over 90 years, starting 1995. As a result, we identified that the global timber market increases the carbon dioxide concentration about l.9% over next 90 years; hence results in a positive effect on global warming. For sensitivity analysis, we performed these procedures under three different timber demand growth scenarios.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.981-986
• /
• 2002

ACSR of the catenary wires is corrosion degradation progressed by the effect of atmospheric pollution. ACSR which consists of galvanized steel stranded aluminum. The inside of Steel Reinforced is hot-dipped zinc coating steel wire and it takes charge of tension. If ACSR is exposed in atmosphere, the galvanic corrosion is occurred because it is contacted with aluminum. It is occurred the chemical reaction rapidly so that the local a defect is also occurred. If the catenary wires are exposed in atmosphere of pollution conditions, it may cause to reduce the mechanical strength by corrosion degradation and may cause to damage the wires by micro cracks. Accordingly, this study presents the effects of mechanical properties through the corrosion of ACSR.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.47.1-47.1
• /
• 2014

We examine the effect of environment on star formation activity of a sample of galaxy group catalogue given in Tempel et al.(2012) constructed from the Sloan Digital Sky Survey Data Release 8. In order to compare galaxies in different environment, we classify galaxies into two groups: galaxies in low density environment and galaxies in high density environment. After matching colors and apparent magnitudes of the galaxies, we are left with 5912 galaxies in each of the environment category. The fraction of star-forming galaxies in low-density environment is ~34%, higher than ~15% in high-density environment. Star-forming galaxies in low density environment have a higher average SFR value than those in high density environment. The bulge-to-disk ratio for galaxies in two different environment shows bimodal distribution. Regardless of the environment, we find galaxies with high star formation rate despite their red (g-r) color, for which the origin enhancing their star formation rate is investigated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1169-1174
• /
• 2000

Since the cement-water reaction in exothermic by nature, the temperature rise within a large concrete mass. Significant tensile stresses may develop from the volume change associated with the increase and decrease of the temperature with the mass concrete. There thermal stresses will cause temperature-related cracking in mass concrete structure. These typical type of mass concrete include mat foundation, bridge piers, thick wall, box type walls, tunnel linings, etc. Crack control methods can be considered at such stages as designing, selecting the materials, and detailing the construction method. Temperature and analysis was performed by taking into consideration of the cement type and content, boundary and environment conditions including the variations of atmospheric temperature and wind velocity. This is paper, the effect of separate placement of thermal crack control footing was analysed by a three dimensional finite element method. As a result, using this method, thermal crack control can be easily performed for structures such as mat structures.

• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.116-122
• /
• 2004

The purpose of this study is to investigate effects of computer animations using particulate model in elementary science classes related to air pressure. To do those, four classes of 5th grade in an elementary school located in a city were selected. As an experiment group, two classes were applied the teaching materials of computer animations developed for this study based on particulate model. The other classes as a control group were not applied these materials in science classes. The total scores of experiment group in which computer animation using particulate model was applied in science classes are higher than those of the control group in the conception test. Only in one conception related to high and low atmospheric air pressure, the scores of the two groups are not significantly different at 0.05 significance level.