• 무역학회지
• /
• 제44권2호
• /
• pp.83-94
• /
• 2019

Article 17 of the Marine Insurance Act (MIA) states that "A contract of marine insurance is a contract based upon the utmost good faith, and if the utmost good faith be not observed by either party, the contract may be avoided by the other party." In the Carter v. Boehm case, Lord Mansfield was the first to provide a comprehensive description of the duty of utmost good faith, which is analyzed here. This judgement not only laid the foundation for the Modern English Insurance Act, but it also influenced the draft of the English Insurance Act of 2015, which aimed at correcting distortions that occurred during the application of statue law and common law thereafter. The duty of utmost good faith, applied between Lord Mansfield's insured and insurer presents the context of information asymmetry of the insured and insurer entering contracts. In the absence of information asymmetry, in contrast to the effects of being in both sides of the duty of utmost good faith, alleviating the duty of disclosure of the insured, and it is also clear that the warning of the severity of the retrospective avoidance of the breach of duty of disclosure and the need for its limited application have already been pointed out. Furthermore, considering the principle of retrospective avoidance, the duty of utmost good faith should be understood as a concept limited to the duty of disclosure before a contract is concluded

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.81-85
• /
• 2008

본 연구에서는 소방제품인 유도등의 안정성 분석을 위하여 일반조명기기의 기준과 유도등의 형식승인 및 검정기술기준을 비교하였다. 유도등의 형식승인 및 검정기술기준에는 없는 시험항목을 도출하였다. 또한 도출된 시험항목으로 유도등을 대상으로 실험을 수행하였다. 역률을 보상하기 위하여 역률보상회로를 설계하였고 역률, 파고율, 비대칭율, 휘도의 변화를 분석하였다. 설계된 회로의 타당성을 검증하기 위하여 전압과 전류의 파형을 측정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1422-1423
• /
• 2006

In our study, the PTFE nozzle ablation in the high-voltage self-blast type $SF_6$ gas circuit breaker was investigated. The test circuit breaker has the structure that the pin electrode is moving and the pressure reservoir volume and the dimension is almost same as commercial 145kv 40kA circuit breaker for similar result in real circuit breaker. The variation of current and arcing time was the range of $36kA_{rms}$(symmetry) - $40kA_{rms}$(asymmetry) and 10-16 ms. From the measured data the tendecy of the mass loss of the nozzle to current load and arc energy was estimated. In this process, the distance from the arc to nozzle(PTFE) surface, area which was exposed to arc and stroke contour was considered. These results will be used to enhance the accuracy of the computational fluid dynamics analysis in circuit breaker and estimate the residual life time of a circuit breaker.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.144-149
• /
• 2011

Currently, switched reluctance motors are studied to increase energy efficient. The switched reluctance motor is possible to control higher speed and torque than the induction motors and composition is simple. Current and rotor speed are considered to install the switched reluctance motor. In this paper, Simulink model of the switched reluctance motor is suggested and the adaptive controller is applied to the model for the speed control. Asymmetry converter including the IGBT is concerned with real-time control and the speed of switched reluctance motor is controlled by installing adaptive controller.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.273-276
• /
• 2001

The origin of image-slicking in metal-insulator-metal type thin-film-diode(TFD) LCDs is the asymmetric current-voltage(I-V) characteristic of TFD element. we developed that MIM-LCDs have reduced-image-sticking and perfect symmetry characteristic. One-Time Post-Annealing (OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and uuper metal are annealed at one time. The treatment temperatures and fabricated process of TFD element were under foot. Also, this low temperature fabricated process allows the application of plastic substrates.

• 전기학회논문지P
• /
• 제61권1호
• /
• pp.55-58
• /
• 2012

By using EEG and HRV, subjects were estimated on their psychological and physiological reaction when reading psychrometric chart in 7 point century font, in an environmental test room in the condition of temperature 25[$^{\circ}C$], relative humidity 50[RH%], air current speed 0.02[m/sec], giving variation in illuminance to 0.1, 300, 600, 1000, 1300 and 1600[lux]. As a result, it was at 1300[lux] that absolute ${\alpha}$ wave, SMR, SDNN were most vitalized, and also both sides ${\alpha}$ wave asymmetry index, SEF50, HRT, stress and fatigue degree were at the lowest. It was found that a certain illuminance which minimizes psychological stress and fatigue degree while enhancing concentration and task achievement stably does exist.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.202-206
• /
• 2006

In this paper, an auto detection method of stator winding fault of small induction motor is suggested. The Park's vector pattern which is obtained from 3-phase current signal by d-q transforming, is very good to detect winding fault. Comparing the Park's vector pattern of testing motor with its of healthy motor, the Park's vector pattern of fault motor is became an ellipse and the asymmetry is increased by the winding fault series. So for detecting the dis-symmetry, id-filtered function, Min-value, and Max-value are suggested for auto detecting. Using LabVIEW programing, 3-phase healthy motor and several kind of winding fault motors are tested and the test results are shown that the suggested method can gives us a possibility of an auto detecting winding fault.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.924-926
• /
• 1997

A high impedance fault(HIF) in a power system could be due to a downed conductor, and is a dangerous situation because the current may be too small to be detected by conventional means. In this paper, HIF(High impedance fault) and LIF(Low impedance fault) detection methods were reviewed. No single defection method can detect all electrical conditions resulting from downed conductor faults, because high impedance fault have arc phenomena, asymmetry and randomness. Neural network are well-suited for solving difficult signal processing and pattern recognition problem. This paper presents the application of artificial neural network(ANN) to detect the HIF and LIF. Test results show that the neural network was able to identify the high impedance fault by real-time operation. Furthermore, neural network was able to discriminate the HIF from the LIF.

• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.240-249
• /
• 1993

여러 종류의 다양한 외력조건에 의해서 형성되는 부유사농도에 대한 종합적 해석을 수행하고, 부유사양 Flux의 산정에 있어서 매우 중요한 역할을 차지하는 확산계수와 기준점농도에 관한 실용적 평가식을 제안하였다. 부유사농도의 연직확산계수는 사연형상을 고려한 저부마찰속도 및 조도요소를 사용하여 계산되는 과동점성계수에 대해 명확한 비예관계가 성립됨이 확인되었다. 또한, 흐름이 파에 부가되었을 경우 발생하는 기준점농도의 저하현상은 파와 흐름의 공존영역에서 형성되는 사연의 비대칭성에 기인됨이 확인되었다.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.215-220
• /
• 2018

A novel porous-core hexagonal lattice photonic crystal fiber (PCF) is designed and analyzed for efficient terahertz (THz) wave propagation. The finite element method based Comsol v4.2 software is used for numerical analysis of the proposed fiber. A perfectly matched layer boundary condition is used to characterize the guiding properties. Rectangular air-holes are used inside the core to introduce asymmetry for attaining high birefringence. By intentionally rotating the rectangular air holes of porous core structure, an ultrahigh birefringence of 0.045 and low effective material loss of $0.086cm^{-1}$ can be obtained at the operating frequency of 0.85 THz. Moreover, single-mode properties, power fraction in air core and confinement loss of the proposed PCF are also analyzed. This is expected to be useful for wideband imaging and telecom applications.