• 제목/요약/키워드: Asymmetric weight-bearing

검색결과 12건 처리시간 0.024초

편측성 운동이 축구선수의 척추 변형과 체중 지지에 미치는 영향 (Effect of asymmetric exercise to soccer player's spinal deformity and weight bearing)

  • 엄요한;박승규;양대중
    • 대한임상전기생리학회지
    • /
    • 제10권1호
    • /
    • pp.45-52
    • /
    • 2012
  • Purpose : This study is carried out to investigate the effect of asymmetric exercises on soccer players' vertebral abnormality and weight bearing. Methods : A total of 40 soccer players were divided into either a group of 20 players who use a unilateral foot or a group of 20 players who use both feet. 3-dimensional spine structure analyzer was used to analyze body inclination, pelvic inclination, pelvic torsion, turning of spinal segment, spinal curvature, thoracic kyphosis curvature, lumbar lordosis curvature, left/right weight distribution, and front/back weight distribution. Results : The result of the two groups showed that there were significant differences (p<0.05) for every item except turning of spinal segment and lumbar lordosis curvature. Conclusion : From this result, we can find that spinal and pelvic deformity and body weight are unilaterally supported for soccer players with asymmetric exercises.

뇌졸중 환자의 낙상 예방을 위한 체중부하 비대칭과 자세 동요와의 관련성 (The Relation Between Postural Sway and Asymmetric Weight-bearing for Fall Prevention in Patients with Stroke)

  • 송창호;이규창;유재호;이경진;이승원
    • 대한물리의학회지
    • /
    • 제5권1호
    • /
    • pp.81-88
    • /
    • 2010
  • Purpose : The purpose of this study was to investigate the relationship between postural sway and asymmetric weight-bearing for fall prevention in patients with stroke. Methods : Fifty-three individuals with hemiplegic stroke and 57 healthy older adults c

비대칭적 입식자세에서 상지 조립 작업 시 체간 및 둔부 근육의 좌우 근활성도 비교 (Comparison Between Right and Left Muscle Activities of Hip and Trunk During Manual Task in Asymmetric Weight-Bearing Posture)

  • 정지윤;전혜선;이충휘;이정원
    • 대한인간공학회지
    • /
    • 제29권3호
    • /
    • pp.279-286
    • /
    • 2010
  • The purpose of this study was to compare the electromyographic(EMG) activities of trunk and hip muscles between right and left sides while subjects performed prolonged manual task in asymmetric and symmetric weight-bearing posture. Fifteen healthy male college students were recruited for this study. The subjects were asked to perform bimanual upper extremity task for 6 minutes in two different standing postures. In the symmetric weight-bearing posture, the subjects were standing with evenly distributed body weights to both legs. In the asymmetric weight-bearing posture, the subjects distributed about 90% of their body weight onto their preferred(supporting) leg and 10% of their body weight onto the opposite leg while they were standing. EMG activities of the right and left internal oblique, erector spinae, gluteus maximus, and gluteus medius were measured and normalized as % MVIC. Then the EMG data were statistically analyzed using paired t-tests. The EMG activities of all measured muscles were not significantly different between the right and left side in the symmetrical weight-bearing posture(p>0.05). However, the EMG of the supporting side internal oblique was significantly lower than the opposite side(p<0.05), and the EMG of the erector spinae, gluteus maximus, and gluteus medius were significantly greater on the supporting side(p<0.05). The results of this study support that unbalanced use of right and left muscle possibly causes the changes in muscle length which results in asymmetry of trunk and hip muscles. Furthermore, the uneven weight support onto right and left legs will cause a distortion of viscoelastic ligaments around hip and sacroiliac joints in the long run. Further studies to determine the effect of various manual tasks on the trunk and hip muscles as well as the effect of asymmetrical weight-bearing standing posture on hip and back muscle fatigue may be required.

The Effect of Pelvic Inclination on Gait Elements and Weight Bearing of Healthy Adults

  • Cho, Sung-Hyoun;Kim, Cheol-Yong
    • 국제물리치료학회지
    • /
    • 제2권2호
    • /
    • pp.294-300
    • /
    • 2011
  • The purpose of this study was to investigate the influence of the static pelvic inclination and declination in the static standing position on weight bearing rate and gait elements. Fourteen healthy adults in their twenties were participated. Two groups of healthy adults were allocated in this study: above and below the average of pelvic tilt. The correlation between the pelvic inclination, weight bearing rate and gait elements were measured. There was a statistical correlation between the pelvic tilt and step. Also, there was a statistical difference when we compared anterior declination with swing period and posterior declination with step. There was an asymmetric correlation between pelvic tilt and step. However, there was no statistical difference between the groups above and below the average of pelvic tilt. This result indicates that dipper pelvic inclination doesn't affect the asymmetry of step.

Comparison of Buttock Pressure and Pelvic Tilting Angle During Typing in Subjects With and Without Unilateral Low Back Pain

  • Hwang, Ui-Jae;Kim, Si-Hyun;Choi, Houng-Sik;Kwon, Oh-Yun
    • 한국전문물리치료학회지
    • /
    • 제21권1호
    • /
    • pp.37-46
    • /
    • 2014
  • Asymmetric sitting posture may cause asymmetric buttock pressure and unilateral low back pain (LBP). The purpose of this study was to compare the differences of buttock pressure between both sides, and pelvic angle (sagittal and coronal planes) during typing in a sitting position on a pressure mat (Baltube) in individuals with and without unilateral LBP. Ten subjects with unilateral LBP and ten subjects without unilateral LBP were recruited for this study. Buttock pressure was measured using a pressure mat and pelvic angles were measured using a palpation meter. The subjects performed typing in a sitting posture for 30 minutes. Pressure data were collected and averaged at initial term (from start to first minutes) and final term (last minutes of 30 minutes). Angles of pelvic tilting were measured after 30 minutes typing. Pressure asymmetry values (difference in pressure between both sides) were calculated at the initial and final terms. A two-way analysis of variance was used to compare the differences between the initial and final pressure asymmetry values in subjects with and without unilateral LBP. An independent t-test was applied to compare the pelvic tilt angles between the two groups. To compare the change of pressure from the initial term to the final term between the symptomatic and asymptomatic sides in the unilateral LBP group, a paired t-test was applied. In the unilateral LBP group, the pressure asymmetric value at the final term was significantly greater than that of the initial term (p<.05). The angle of pelvic tilting in coronal plane was significantly greater in the unilateral back pain group compared to the without unilateral LBP group (p<.05), however, there was no significant difference in the angle of pelvic tilting in the sagittal plane between the two groups (p>.05). In the unilateral LBP group, the change of pressure from the initial term to the final term was significantly less in the symptomatic side (-6.90 mmHg) than the asymptomatic side (5.10 mmHg). This asymmetric sitting posture may contribute to unilateral LBP in the sitting position. Further studies are needed to determine if asymmetric weight bearing in sitting causes unilateral LBP or if unilateral back pain causes asymmetric weight bearing, and if the correction of asymmetric weight bearing in sitting can reduce unilateral LBP.

체중부하 훈련이 대칭적 체중지지율에 미치는 효과 (Effects of weight bearing training on symmetrical weight supporting rate)

  • 박중석;이석민
    • 대한물리치료과학회지
    • /
    • 제9권1호
    • /
    • pp.53-59
    • /
    • 2002
  • This study is research for effect of the involved lower limb weight bearing training on symmetrical weight supporting rate improvement by practicing involved lower limb weight bearing training of three weeks period to improve standing equilibrium problem with asymmetric weight supporting rate of hemiplegia. In result of the study, it has shown that P-value incase of involved supporting rate is lower than level of significance $\alpha$<.05 and mean improvement rate of experienced group is higher in comparison with controlled group and experienced group. In changing quantity of involved maximum supporting rate, P-value is .26 and higher than level of significance $\alpha$<.05, and so it did not show significant difference statistically. But in case of experienced group between pre and post-test, involved side supporting rate and involved side maximum supporting rate showed significant improvement in all. In comparison of relative characteristic training effect difference, it was shown that train-learning effect on case of 40-60 years old, hemorrhagic patient and standard body bun of patient is valuable, which showed significant improvement in case of paralytic side and disease period, it did not show significant difference on excercise learning effect in two above cases. In the above result, we can say that continuous weight bearing training on the involved lower limb for three weeks period help improve the involved side supporting rate of hemiplegia. Accordingly, the weight bearing training on the involved lower limb is training method that patient can easily train with simple guidance of therapists, without being special expensive equipment. Furthermore it can be helpful to establish home therapeutic plan for hemiplegia through education of a patron.

  • PDF

베어링 허브의 트랜스퍼 열간 단조 공정 설계에 관한 연구 (A Study on Transfer Process Design on Hot Forging of Bearing Hub)

  • 변현상;김병민;고대철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.993-996
    • /
    • 2005
  • This paper is concerned with transfer process on hot forging of bearing hub. Workers on hot forging have difficulty in working by high temperature and weight workpiece. And In conventional got forging of bearing hub, the material wasted to the flash accounts approximately 10% of the original workpiece. It is need manufacture automation and reduce the cost of forged products. Surface treatment of die and lubricant are investigated from experiment and FE-simulation for analysis of forming simulation. In order to hot forging process design considered flash thickness and blocker geometry and initial temperature of die and billet. This transfer process gave comparatively good results compared with actual products.

  • PDF

Relationship between Hip Medial Rotation Range of Motion and Weight Distribution in Patients with Low Back Pain

  • Kim, Sang-Kyu;Kim, Won-Bok;Ryu, Young-Uk
    • 대한물리의학회지
    • /
    • 제9권3호
    • /
    • pp.279-284
    • /
    • 2014
  • PURPOSE: This study intended to verify whether there was actual correlation between weight-bearing asymmetry and a limitation in hip joint rotation range in patients with low back pain. METHODS: Thirty five low back pain patients voluntarily participated this study. For each participant, hip joint medial rotation symmetry rate and the weight-bearing symmetry rate were calculated. The correlation between the two variables was investigated. RESULTS: A decrease in the left hip joint medial rotation range of motion (ROM) was observed more often than a reduction in the right hip joint medial rotation ROM. However, similar number between right and left side was observed in ground reaction force more weighted. The coefficient between the passive hip joint medial rotation symmetry rate and the weight loading symmetry ratio was -0.19 (p < 0.05). CONCLUSION: The present study demonstrated a weak correlation between the hip joint medial rotation ROM and the weight distribution of both feet. Such result suggests that careful evaluation by separating each element is needed in treating patients with low back pain. Future research should take into account asymmetric alignment and abnormal movement in different joints of the body as well as asymmetry in the bilateral hip joint rotation and the unilateral weight supporting posture.

발의 위치가 편마비 환자의 의자에서 일어서기에 미치는 영향 (The Effects of Varying Foot Placement on Sit-to-stand in Patients with Hemiplegia)

  • 김종만;노정석
    • 한국전문물리치료학회지
    • /
    • 제4권1호
    • /
    • pp.30-38
    • /
    • 1997
  • The patients with hemiplegia show different body weight distribution as compared to normal subjects. These patients load their body weight more on sound leg than affected leg. The purpose of this study was to examine the effect of foot placement under three conditions: forward, intermediate, and backward placement, on body weight distribution and time needed to rise while assuming sit-to-stand. Fourteen patients with hemiplegia participated in the study. Their body weight distributions during sit-to-stand under the three different conditions were measured by a limb loader and time needed to rise was measured by a stopwatch. The data were analysed by the repeated measure of one-way ANOVA. Statistical Analysis demonstrated that body weight distribution was less asymmetric in backward foot placement. The difference of body weight bearing rate between sound leg and affected leg was significantly decreased as foot placement moved from forward to backward. These results show that backward foot placement during sit-to-stand make patient with henuplegia distribute their body weight more evenly on the lower extremity.

  • PDF

Effects of foot pressure using the elastic band with rings during sit-to-stand in persons with stroke

  • Hwang, Young-In;Kim, Ki-Song
    • Physical Therapy Rehabilitation Science
    • /
    • 제6권4호
    • /
    • pp.159-163
    • /
    • 2017
  • Objective: Persons with stroke have a tendency to exhibit asymmetric weight-bearing during sit-to-stand because due to the attempt to support themselves with the non-paretic foot. However, there are few devices that can assist with sit-to-stand (STS) performance. This study was designed to investigate the use of the elastic band with rings (EBR) in improving weight-bearing effectively in persons with stroke during STS training. Design: Cross-sectional study. Methods: Thirteen stroke survivors participated in the study. An EBR was applied onto the patient during STS activity. The foot pressure was measured before and after wearing the EBR, with a 5-minute rest period between measurements. Subjects were asked to perform each test twice with and without the EBR. Bilateral feet pressures were measured with standing posture being divided into the forward and backward aspects. The foot contact pressure during STS activity was measured with the CONFORMat System. Results: With EBR, the forward pressure of the affected foot significantly increased while the less-affected forward foot pressure significantly decreased (p=0.015 and p=0.023, respectively). The backward foot pressure did not differ significantly in the two limbs, and there was no difference with and without the EBR in terms of the total pressure of the affected foot. There was a significant difference with and without the EBR in the total pressure of the less-affected foot (p<0.05). Conclusions: STS training with the EBR has been shown to improve weight-bearing of both feet while decreasing the total pressure of the less-affected foot in stroke survivors. Therefore, we suggest that the EBR is a useful tool for STS training for persons with stroke in the clinic.