• Bulletin of the Korean Chemical Society
• /
• 제22권2호
• /
• pp.137-138
• /
• 2001

• 소음진동
• /
• 제8권2호
• /
• pp.346-352
• /
• 1998

This paper presents actuating characteristics of an asymmetric high-speed optical pick-up fine actuator that can be installed in a small area such as a notebook personal computer. In the asymmetric actuator four points (mass center, actuation center, supporting point of wire suspension on a bobbin, and optical axis) are not coincident so that the proposed actuator suspension reveals undesirable suspension resonance in the pitch and yaw direction. Lumped parameter dynamic model in each direction is used to investigate the driving characteristics with respect to relative location of the four points. Some of desired design directions toward reducing resonance peaks are suggested by using sensitivity information. In order to avoid undesirable resonance, at least supporting point on the obbin must be located in the middle of the mass and actuation center of the asymmetric pick-up actuator.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.728-734
• /
• 2000

An asymmetric actuator can be used to reduce the distance between the reflective mirror and objective lens of a small optical disk drive for use in the notebook-sized personal computer data storage devices. However, this asymmetric actuator is very sensitive to the subsidiary resonance which is caused by its rigid body motion. In this paper, an analytical approach using a simple lumped parameter system model is presented with a physical insight to investigate why the subsidiary resonance occurs. The finite element method is used to figure out the force and torque characteristics of the asymmetric actuator which are essential to understand the subsidiary vibration characteristics. The frequency responses are presented to examine how the subsidiary resonance is altered for various situations of having different thickness of a yoke and permanent magnet and of having a different magnet circuit. Finally, the design guidelines to avoid the subsidiary resonance will be presented.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.40-46
• /
• 2011

This paper is to investigate the effects of the asymmetrical support stiffness on the stability of a supercritical driveshaft with asymmetrical shaft stiffness and anisotropic bearings. The equations of motion is derived for a system including a rigid disk, a massless flexible asymmetric shaft, anisotropic bearings and a support beam. The Floquet theory is applied to perform the stability analysis with the variation of the support stiffness, the shaft asymmetry, the shaft damping and the shaft speed. The results show that the asymmetric support stiffness is closely related to the stability caused by primary resonance as well as the supercritical operation. First, the stiffness variation can stabilize the system around primary resonance by weakening the parametric resonance from the shaft asymmetry. Second, it also improve the stability characteristics at a supercritical operation when the support stiffness is not so high relative to the shaft stiffness.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.712-714
• /
• 2000

Non-Lorentyian resonance is predicted to occur in two-photon photoabsorption processes due to the detuning off the intermediate levels. This type of non-Lorentzian resonance is distinct from the asymmetric resonance resulting from the effects of q uantum interference between competing indistinguishable dynamic pathways. The product distributions are shown to be constant near this type of resonance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.160-165
• /
• 1998

The sub-resonance modes can be easily excited by the assembling tolerance in the asymmetric type optical pick-up actuators, compared with the symmetric type. In this paper, we propose the novel method for reducing the vibration due to the sub-resonance modes where undesirable modes can be decreased by adding the damping, which can be achieved by increasing the flexibility of holder PCB, against to the sub-resonance modes. Using the finite element method, the change of mode shapes is investigated as the shape of holder PCB is modified. Experimental results support that the proposed method reduces remarkably the vibration of sub-resonance modes of the optical pick-up actuator.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.65-70
• /
• 2001

An investigation into asymmetric vibrations of a clamped circular place under a harmonic excitation is made. We examine a primary resonance. in which the frequency of excitation is near the natural frequency of an asymmetric mode of the plate. We found not only a response haying the form of standing wave but also one having the form of traveling wave, which was not observed by Sridhar, Mook and ${Nayfeh}^{(1)}$

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.663-669
• /
• 2016

본 논문에서는 높은 감도의 테라헤르츠 센서로 응용이 가능한 고품질 비대칭 분리고리공진기(ASLR: Asymmetric Split-Loop Resonator) 메타물질의 구조적인 비대칭 정도에 따른 ASLR의 공진특성 변화를 전자기 시뮬레이션을 통하여 분석하였다. 특히, ASLR의 구조적 비대칭성은 높은 품질인자를 갖는 파노공진을 발생시키므로 ASLR의 비대칭성 정도에 따라서 ASLR 고유공진과 파노공진의 공진주파수 변화와 투과계수 및 품질인자의 변화를 분석하였다. 또한, ASLR의 구조적 비대칭성에 따른 ASLR의 공진 특성 변화의 원인을 분석하기 위해 표면전류밀도를 계산하여 ASLR 공진의 공진주파수, 투과계수, 그리고 품질인자가 변화하는 이유를 분석하였다. 이를 통하여 ASLR 고유공진의 표면전류밀도는 이중 극자를 형성하여 높은 방사 손실을 가지게 되므로 품질인자가 낮아지게 되고, 파노공진의 표면전류밀도는 닫힌 모드 또는 사중 극자를 형성하여 이중 극자에 비하여 낮은 방사 손실을 가지므로 파노공진 상태의 ASLR이 높은 품질인자를 가지게 됨을 확인하였다. 이러한 ASLR의 파노공진 특성 분석 결과를 바탕으로 메타물질의 비대칭성을 조절하면 높은 품질인자를 가지는 테라헤르츠 고성능 필터 또는 고감도 센서 개발이 가능하다. 이러한 고감도 고성능 테라헤르츠 소자 개발은 테라헤르츠 메타물질의 실질적인 산업 응용을 유도할 것으로 기대한다.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.56-63
• /
• 2014

This paper provides a comprehensive study on the Sommerfeld phenomena in an asymmetric rotor with a nonideal power supply. An analytical approach is employed by deriving the equations of motion in a nondimensional form. The system parameters, including the asymmetry, external and internal damping, and motor power, are chosen to find their effects on the characteristics of the Sommerfeld phenomena and critical behavior around resonance. Results show that the rotor asymmetry suppresses the Sommerfeld phenomena and helps pass through resonance if the asymmetry is small. However, it is observed that the opposite effects exist in case of a large asymmetry. It is also found that the effects of external damping on the Sommerfeld phenomena are similar to those of the asymmetry, whereas internal damping has less effects than external damping and the asymmetry. By performing numerical simulations, four types of critical behavior are identified from the viewpoints of the stability and the passage through resonance.

• Bulletin of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.331-332
• /
• 2000