• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.823-831
• /
• 2016

A high-efficiency method is proposed to suppress magnetic core imbalance in phase-shifted full-bridge (PSFB) converters. Compared with conventional solutions, such as controlling peak current mode (PCM) or adding DC blocking capacitance, the proposed method has several advantages, such as lower power loss and smaller size, because the additional current sensor or blocking capacitor is removed. A time domain model of the secondary side is built to analyze the relationship between transformer core imbalance and cathode voltage of secondary side rectifiers. An approximate control algorithm is designed to achieve asymmetric phase control, which reduces the effects of imbalance. A 60 V/15 A prototype is built to verify the proposed method. Experimental results show that the numerical difference of primary side peak currents between two adjacent cycles is suppressed from 2 A to approximately 0 A. Meanwhile, compared with the PCM solution, the efficiency of the PSFB converter is slightly improved from 93% to 93.2%.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.1
• /
• pp.91-98
• /
• 2012

Climate change and other pollutions make a huge demand of environment friendly and high efficient motors especially Brushless DC (BLDC) motors. Generally, bidirectional energized BLDC motors are used widely; however, inverter devices used in the driver put fear of being effected by noise. This paper proposes unidirectional energized BLDC motor which utilizes asymmetrical H-bridge circuit as the driver circuit. The Minato motor is one of the pioneers in unidirectional energized system. The use of bar magnets in the rotor is one of the biggest disadvantages of the motor. We proposed using tabular magnets. The paper compares the power consumption and efficiency of the Minato motor and the proposed motor. During high speed rotation, undesirable armature current is generated that has a deceleration characteristic. This current lowers the motor's efficiency. In this paper, we propose the solutions and show comparison through equations of the copper loss ratio for the Minato and our proposed motors. The third motor, which has the highest efficiency, was discovered during examination of the equations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.896-915
• /
• 2023

The network function virtualization (NFV) uses virtualization technology to separate software from hardware. One of the most important challenges of NFV is the resource management of virtual network functions (VNFs). According to the dynamic nature of NFV, the resource allocation of VNFs must be changed to adapt to the variations of incoming network traffic. However, the significant delay may be happened because of the reallocation of resources. In order to balance the performance between delay and quality of service, this paper firstly made a compromise between VNF migration and energy consumption. Then, the long short-term memory (LSTM) was utilized to forecast network traffic. Also, the asymmetric loss function for LSTM (LO-LSTM) was proposed to increase the predicted value to a certain extent. Finally, an experiment was conducted to evaluate the performance of LO-LSTM. The results demonstrated that the proposed LO-LSTM can not only reduce migration times, but also make the energy consumption increment within an acceptable range.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.83-95
• /
• 2007

We are motivated by how offline and online firms compete. The Internet made many conventional offline firms build a dynamic online business as another sales channel using their advantages such as brand equity, an existing customer base with comprehensive purchasing data, integrated marketing, economies of scale, and longtime experience with the logistics of order fulfillment and customer service. Even though the hybrid selling using both offline and online channel seems to have advantages over a pure online retailer, all the conventional offline firms are not seen to create an online business. Many conventional offline firms began to launch online business since the Internet era, however, just being online business is not likely to guarantee success. According to Bizate.com's report whether the hybrid channel strategy is successful is still under investigation. For example, consider the classic case of Barnes and Noble versus Amazon.com, Barnes and Noble was already the largest chain of bookstores in the U,S., when Amazon.com was established in 1995, BarnesandNoble.com followed suit in 1997, After suffering losses in its initial years, Amazon finally turned profitable in 2003. In 2004, Amazon's net income was $588 million on revenues of $6.92 billion, while Barnes and Noble earned $143 million on revenues of $4.87 billion, which included BarnesandNoble.com's loss of $21 million on revenues of $420 million. While these examples serve to motivate our thinking, it does not explain when offline firms should venture online. It also does not provide an analytical framework that can generalized to other competitive online-offline situations. We attempt to do this in this paper and analyze a hybrid channel model where a conventional offline firm competes against online firms using its own direct online channels. We are particularly interested in an optimal channel strategy when a conventional offline firm sells its products through its own direct online channel to compete with other rival online firms. We consider two situations where its direct online channel and other online firms are symmetric and asymmetric in the brand effect. The analysis of this paper presents several findings. In the symmetric model where a hybrid firm's online channel is not differentiated from a pure online firm, (i) a conventional offline firm will not launch its online business. In the asymmetric model where a hybrid firm's online channel is differentiated from a pure online firm, (ii) a conventional offline firm can launch its online business if its brand effect is greater than a certain threshold. (iii) there is a positive relationship between its brand effect and online customer costs showing that a conventional offline firm needs more brand effect in order to launch online business as online customer costs decrease. (iv) there is a negative relationship between its brand effect and the number of customers with access to the Internet showing that a conventional offline firm tends to launch its online business when customers with access to the Internet increases.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.219-222
• /
• 2005

We present the high-resolution (2"-4") images of the molecular envelopes surrounding the evolved stars, V Hya, VY CMa, and ${\pi}^1$ Gru observed with the Submillimeter Array. The CO J=2-1 and 3-2 images of the carbon star V Hya show that the circumstellar structure of this star consists of three kinematic components; there is a flattened disk-like envelope that is expanding with a velocity of ${\~}16 km\;s^{-1}$, the second component is the medium-velocity wind having a deprojected velocity of 40-120 km $s^{-l}$ moving along the disk plane, and the third one is the bipolar molecular jet having an extreme velocity of 70-185 km $s^{-l}$. The axis of this high velocity jet is perpendicular to the plane of the disk-like envelope. We found that the circumstellar structure of the S-star ${\pi}^1$ Gru traced by the CO J =2-1 resembles that of V Hya quite closely; the star is surrounded by the expanding disk-like envelope and is driving the medium-velocity wind along the disk plane. We also obtained the excellent images of VY CMa with the CO and $^{13}CO$ J=2-1 and $SO\;6_5-5_4$ lines. The maps of three molecular lines show that the envelope has a significant velocity gradient in the east-west direction, suggesting that the envelope surrounding VY CMa is also flattened and expanding along its radial direction. The high-resolution images obtained with the SMA show that some AGB stars are associated with the asymmetric mass loss including the equatorial wind and bipolar jet.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.57-62
• /
• 2000

Sulfonated Polysulfone (SPSF) cation-exchange membranes were synthesized by introducing various ratio of chlorosulfuric acid (CSA) onto the main chain of polysulfone (PSF). Properties such as ion exchange capacity, water content, liked ion concentration, and partition coefficient were measured, respectively. Through the analysis of DSC and TGA, it has been shown that glass transition temperature increased and weight loss decreased as sulfuric acid group concentration increased. Structure of membrane measured by AFM and SEM was seen to be asymmetric. Apparent diffusion coefficient of sodium ions through SPSF membrane by AC impedance was increased as sulfuric acid group concentration increased.

• Journal of the Korean Society of Combustion
• /
• v.17 no.3
• /
• pp.17-29
• /
• 2012

The effects of strain rate and preferential diffusion of $H_2$ on flame extinction are numerically studied in interacting premixed syngas-air flames with fuel compositions of 50% $H_2$ + 50% CO and 30% $H_2$ + 70% CO. Flame stability diagrams mapping lower and upper limit fuel concentrations at flame extinction as a function of strain rate are examined. Increasing strain rate reduces the boundaries of both flammable lean and rich fuel concentrations and produces a flammable island and subsequently even a point, implying that there exists a limit strain rate over which interacting flame cannot be sustained anymore. Even if effective Lewis numbers are slightly larger than unity on extinction boundaries, the shape of the lean extinction boundary is slanted even at low strain rate, i.e. $a_g=30s^{-1}$ and is more slanted in further increase of strain rate, implying that flame interaction on lean extinction boundary is strong and thus hydrogen (as a deficient reactant) Lewis number much less than unity plays an important role of flame interaction. It is also shown that effects of preferential diffusion of $H_2$ cause flame interaction to be stronger on lean extinction boundaries and weaker on rich extinction boundaries. Detailed analyses are made through the comparison between flame structures with and without the restriction of the diffusivities of $H_2$ and H in symmetric and asymmetric fuel compositions. The reduction of flammable fuel compositions in increase of strain rate suggests that the mechanism of flame extinction is significant conductive heat loss from the stronger flame to ambience.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.63-70
• /
• 2006

This paper presents the results of Ka band qualification model multiplexers for COMS Payload to be launched in 2008. These are the input and output multiplexers of the satellite transponder to use available frequency resources effectively and the diplexer of the satellite antenna to use the same reflector for both transmitting and receiving frequency bands, respectively. The input multiplexer with four frequency channels has four(4) independent channel filters which consist of an 8-pole elliptic band-pass filter for high frequency selectivity and a 2-pole equalizer for group delay equalization. For low insertion loss, mass and volume reduction, manifold type os employed for output multiplexer. E-plane T-junction is used for either splitting or combining a frequency band into two sub-bands. Asymmetric inductive irises are used to tune the receiving filter easily. The electrical performance and environmental test such as vibration test, mechanical shock test, thermal vacuum test and EMC test are performed and the results of all qualification model multiplexers are compliant to the requirement of each multiplexer. Followed by this qualification, the flight model equipment will be developed.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1611-1625
• /
• 2020

We propose a scaled-down experimental model of vertical air-natural convection channels by applying the modified Ishii-Kataoka scaling method with the assistance of numerical analyses to the Reactor Vault Cooling System (RVCS) of the Proto-type Gen-IV Sodium-cooled fast reactor (PGSFR) being developed in Korea. Two major non-dimensional numbers (modified Richardson and Friction number) from the momentum equation and Stanton number from the energy balance equation were identified to design the scaled-down experimental model to assimilate thermal-hydraulic behaviors of the natural convective air-cooling channel of RVCS. The ratios of the design parameters in the PGSFR RVCS between the prototype and the scaled-down model were determined by setting Richardson and Stanton number to be unity. The friction number which cannot be determined by the Ishii-Kataoka method was estimated by numerical analyses using the MARS-KS system code. The numerical analyses showed that the friction number with the form loss coefficient of 2.0 in the scale-down model would result in an acceptable prediction of the thermal-hydraulic behavior in RVCS. We also performed experimental benchmarking using the scaled-down model with the MARS-KS simulations to verify the appropriateness of the scale-down model, which demonstrated that the temperature rises and the average air flow velocity measured in the scale-down model.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.54-64
• /
• 2010

A firm decides to go to the project based on its investment analysis. However, the cash flows generated from the real project can not be always coincident with what expected as it follows uncertain behavior and the asymmetric payoff caused by the managerial flexibilities involved in the real asset affects the project value. Amongst various managerial flexibilities entailed in most of the real assets, although investment delay has been known to enhance the project value thanks to its ability to provide new market information to management, the related research to select the time to invest have been just few. Therefore, this research aims to show the theoretical framework to decide when to invest reflecting the behaviors of increasing project value and loss recovery cost due to investment delay with option pricing, related financial economic, and variational theories.