• Strategy21
• /
• 통권40호
• /
• pp.190-215
• /
• 2016

As North Korea's asymmetric threats are growing, there have been numerous discussions to find out effective counter-measures and many official plans and procurements efforts have been established. However, discussions on ROK Navy's roles in countering North Korea's asymmetric threats have been taken place very limitedly. Decision makers and military planners put enormous efforts in getting counter-measures, however, most of the options on the table are systems of Army and Air Force. This is true if one looks at components of Kill-Chain, KAMD, and KMPR. With worsening security environment of the Korean peninsula, it has been said by many commentators that ROK Navy needs to consider expanding its roles in countering against North Korea's asymmetric military threats. They asked ROK Navy to go beyond the mind-set that has confined Navy's roles in deterring North Korean naval threats. That is, ROK Navy should fight 'from the sea' as well as fight 'on the sea.' If ROK Navy begins to think about fight 'from the sea,' there would be many possibilities for the Navy to be a part of countering North Korea's asymmetric military threats. In order to pursue proactive roles in countering North Korea's asymmetric threat, ROK Navy needs to consider various options. Massive missile forces, nuclear-propelled submarines, naval special forces may be some of them. With those measures, ROK Navy would launch massive and decisive attacks from the sea without risking survivability of our forces. Considering North Korean Navy's weakness, it is very probable that sea would be safer place than ground or sky. Expanding ROK Navy's roles and being a proactive deterrent forces against North Korean asymmetric threats would provide very reliable counter-measures to South Korean military. Thus, military planners should think how to take the best advantage of expanded ROK Navy's roles and capabilities against North Korean asymmetric threats.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.226-240
• /
• 2020

This paper presents an experimental investigation of asymmetric impact effects on hydroelastic responses. A 1:64 scaled segmented ship model with U-shape open cross-section backbone was newly designed to meet elastic similarity conditions of vertical, horizontal and torsional stiffness simultaneously. Different wave heading angles and wavelengths were adopted in regular wave test. In head wave condition, parametric rolling phenomena happened along with asymmetric slamming forces, the relationship between them was disclosed at first time. The impact forces on starboard and port sides showed alternating asymmetric periodic changes. In oblique wave condition, nonlinear springing and whipping responses were found. Since slamming phenomena occurred, high-frequency bending moments became an important part in total bending moments and whipping responses were found in small wavelength. The wavelength and head angle are varied to elucidate the relationship of springing/whipping loads and asymmetric impact. The distributions of peaks of horizontal and torsional loads show highly asymmetric property.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.22-27
• /
• 2006

Flow around a guided missile in high maneuver, i.e. at a high angle of attack, shows complex phenomena. It is well known that even in geometrically symmetric conditions the flow around a missile at high angles of attack can generate unexpected large side forces and yaw moments due to asymmetric vortices. In this paper, a CFD code (FLUENT) based on the Navier-Stokes equations was used for the numerical analysis to find a suitable numerical mechanism for generation of asymmetric vortices. It is shown that a numerical technique of applying different surface roughness to a specific area of the missile nose surface gives the best fit in comparison with the experimental results. In addition, a numerical investigation of variations of side forces and pressure distributions with angle of attack and roll angle was conducted for the purpose of identifying the source of vortex asymmetries.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.33-38
• /
• 2008

Numerical investigation of asymmetric vortices at high angles of attack subsonic flow is performed using three-dimensional Navier-Stokes equations. A small bump has been carefully selected and attached near the nose of an ogive cylinder to simulate symmetric vortices. Selected bump shape does develop asymmetric vortices and is verified using Lamont's experimental results. By changing the angle of attack, Reynolds numbers, and Mach numbers, the characteristics of asymmetric vortices are observed. The angle of attack which contributes significantly to the generation of asymmetric vortices are over 30 degrees. By increasing Mach number and Reynolds number asymmetric vortices, hence the side forces show decreasing trend..

• 소음진동
• /
• 제10권6호
• /
• pp.977-984
• /
• 2000

Vibration of disk drive spindle is one of the major limiting factors in achieving higher track densities in hard disk drives. Vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and magnetic origins through the motor air-gap. In this paper, radial magnetic forces for symmetric and asymmetric BLDC motor are calculated with respect to the various rotor eccentricity using analytic method. Based on the results of the radial magnetic forces, transient whirl responses of the spindle motor are analyzed using finite element and transfer matrices. Results show that an asymmetric motor has a worse effects on unbalanced magnetic forces and vibration when mechanical and magnetic coupling exists.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.61-67
• /
• 2018

This study proposes a new vibration control approach for adjacent twin structures, which is termed as viscous damper asymmetric coupling system in this paper. The proposed system takes a concept that the diagonal bracing viscous dampers are asymmetrically distributed in two buildings to break the behavior symmetry of the twin buildings and then the coupling viscous damper is additionally installed at the top floor of the two buildings to couple both buildings and interactively transfer the asymmetric behavior-caused damping forces into both buildings. These asymmetric damping distributions and interacting damping forces of the connection damper efficiently suppress the overall vibration of the damper-coupled adjacent twin buildings efficiently. Genetic algorithm (GA) based multi-objective optimization technique is adopted for optimal design of the proposed system. In the numerical example of adjacent twin 10-story building structures, the conventional control approach, that is, uniform damping distribution system (UDS) is also taken into account for comparison purpose. The optimization results verify that the proposed system either can improve the control performance over the UDS with the same damping capacity, or can save the damping capacity significantly while maintaining the similar level of control performance to the UDS.

• 대한치과교정학회지
• /
• 제31권1호
• /
• pp.25-38
• /
• 2001

편측성 II급 부정 교합 환자를 만나는 것은 임상에서는 흔한 일이지만, 치료 방법은 제한적 인 것이 사실이다. 그 중에서도 asymmetric head-gear는 그 사용의 횟수에 비해 정확하고 완전한 이해가 부족한 실정이며, 효과를 극대화시키기 위한 장치의 디자인에 대한 정보 역시 아직도 논란이 많고, 그 동안의 연구들도 확실한 해답을 주지는 못하고 있다. 더욱이 asymmetric iace-bow를 유한요소법을 통해 해석한 것은 그 예를 찾아볼 수 없었기에 본 연구를 시행하게 되었다. 발치나 교정치료의 경험이 없는 정상교합자를 대상으로 유한요소법을 사용하여 편측성 II급 부정교합의 상악 치열궁을 모델링하고, RMO사의 Face-Bow($Penta-Form^{TM}$/Medium size)를 기본 모델로 오른쪽의 outer-bow가 15mm, 25mm, 35mm씩 짧은, 세 개의 asymmetric face-bow를 모델링한 후, 편측성 II급 부정교합 상악 치열궁 모델의 좌,우측 상악 제 1대구치에 세 종류의 asymmetric face-bow를 적용, 편측당 0.3kgf의 힘으로 견인하여 비교한 결과, 다음의 결론을 얻었다. 1. 양쪽 제 1 대구치가 받는 힘의 총합은 세 경우 모두에서 거의 차이가 없었으나, outer-bow의 길이가 짧아질수록 근심위치된 치아가 받는 힘의 크기는 증가하였고, 정상 위치된 치아가 받는 힘의 크기는 감소하는 결과를 보였다. 2. 양쪽 제 1 대구치가 받는 측방력은, 정상 위치된 치아에서는 outer-bow의 길이가 짧아질수록 협측으로의 힘이 커졌고, 근심 위치된 치아에서는 협측으로의 힘이 작아지는 경향을 보여, outer-bow의 길이가 짧아질수록 전체적인 측방력이 정상 위치된 치아의 협측으로 이동되는 경향을 보이긴 했지만, 양쪽 제 1 대구치 모두 협측으로 힘을 받는 것으로 나타나 "Archial Expansion Effect"를 보였다. 3. 양쪽 제 1 대구치가 받는 원심력과 정출력, 그리고 distal tipping의 양은, 정상 위치된 치아에서는 outer-bow의 길이가 짧아질수록 감소하였고, 근심 위치된 치아에서는 outer-bow의 길이가 짧아질수록 증가하는 경향을 보였다. 4. 양쪽 제 1 대구치의 rotation은, 정상 위치된 치아에서는 distal-in의 rotation을 보였으며 outer-bow의 길이가 짧아질수록 그 양이 증가하였고, 근심 위치된 치아에서는 두 가지의 결과를 나타냈는데, outer-bow가 15mm 짧은 경우에는 distal-in의 rotation을 보였으나, 25mm와 35mm 짧은 경우에는 distal-out의 rotation을 보여 15mm와 25mm 사이에 변환점이 존재하는 것으로 나타났다. 5. 치근 분지부 직하방에서 치근막의 초기 응력분포를 관찰한 결과, 정상 위치된 치아의 원심협측 치근에서 outer-bow의 길이가 짧아짐에 따라 압축응력이 구개측에서 원심측으로, 그리고 협측으로 이동하는 양상을 나타내었다. 6. 치근 분지부 직하방에서 치근막의 초기 응력분포를 관찰한 결과, 정상 위치된 치아의 원심협측 치근을 제외한 근심협측 치근과 구개측 치근, 그리고 근심 위치된 치아의 세 개의 치근 모두는, outer-bow의 길이가 짧아질수록 응력의 크기만 변할 뿐 전체적인 응력분포의 양상에는 변화가 없었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.229-236
• /
• 2004

In this paper, the effect of permanent magnet overhang structure on the characteristics in Brushless DC motor has analyzed quantitatively. We classified the overhang structure as symmetric and asymmetric. 3D equivalent magnetic circuit network (EMCN) method which uses the permeance as the distributive variable is used for the efficient analysis of magnetic field. The overhang effect which increases the linkage flux at the stator is verified by comparison between overhang and no overhang structure. In addition, it is known that no load back electro motive force (EMF) is also increased due to the overhang effect. In case of asymmetric overhang structure, the ratio effect of the upper to lower overhang length on the magnetic forces is analyzed. Form the analysis results, the variation of the asymmetric overhang ratio has a significant effect on the axial magnetic force except the radial and tangential magnetic forces. The validity of the analysis results is also clarified by comparison between calculated results and measured ones such as back EMF and cogging torque.

• Structural Engineering and Mechanics
• /
• 제45권3호
• /
• pp.373-389
• /
• 2013

This paper presents the influence of incident angles of earthquakes on inelastic dynamic responses of asymmetry single story buildings under seismic ground motions. The dynamic responses such as internal forces and rotational ductility factor are used to evaluate the importance of the incident angles of ground motions in the inelastic range of structural behavior. The base shear and torque (BST) response histories of the resisting elements and of the building are used to prove that the shape of the BST surface of the building can be a practical tool to represent those of all resisting elements. This paper also shows that the different global forces which produce the maximum demands in the resisting elements tend to converge toward a single distribution in a definable intensity range, and this single distribution is related to the resistance distribution of the building.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.866-875
• /
• 2001

The complex modal testing methods developed for asymmetric rotors are briefly discussed and their performances are experimentally evaluated. For the experiments, a laboratory test rotor is excited by using a newly developed, cost effective magnetic exciter equipped with Hall sensors, which measure the excitation forces. It is concluded that the exciter system is characterized by a wide bandwidth and a high resolution for both the excitation and force measurement, and that the one-exciter/two-sensor technique for complex modal testing of asymmetric rotors is superior to the standard two-exciter/two-sensor technique in terms of practicality and realization.