• 대한가정학회지
• /
• 제30권3호
• /
• pp.101-117
• /
• 1992

Effects of gamma irradiation(2.5∼20kGy) on water absorption property was studied for a local variety of black soybeans. In water absorption patterns of black soybeans, the time to reach a fixed moisture content was reduced depending on the increment of water soaking temperature and irradiation dose. Irradiation at 2.5∼10kGy resulted in the reduction of soaking time of black soybeans by about 1∼3 hours and the increase of hydration capacity by 10∼20%, respectively, compared to the nonirradiated control black soybean. The water uptake rate constant of the irradiated black soybean difinitely increased with the increase of dose levels and water soaking temperature. The activation energy for water absorption and z-value were lower in the irradiated black soybeans than in the nonirradiated control black soybean. The efficacy of water absorption property in the irradiated black soybeans was also recognized after one year of storage at room temperature.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.36-36
• /
• 2002

To Establish of standard technique of length measurent in 2D plane, we develope AFM system. The XY scanner scans the sample only in XY plane, while the Z scanner scans the specimen only in Z-direction. Cantilever tip is controlled to has constant height relative to speciman surface by feedback of PSPD signal. To acquire high accuracy, Z-axis measuring sensor will be added.(COXI or others). In this paper we design XYZ stage suitable for this AEM system. For XY stage, single module parallel-kinnematic flexure stage is used which has high orthogonality and minimum out-of-plane motion. To obtain best performance optimal design is performed. For XY stage, to be robust about parasitic motion optimal design of maximizing Z and tilt stiffness is performed under the constraint of motion range and stage size. And for Z stage, optimal design of maximizing 1st resonant frequency is performed. Because if resonant frequency is get higher, scan speed is improved. So it makes reduce the error by sensor drift. Resultly XYZ stage each have 1st natural frequency of 115㎐, 201㎐, 2.66㎑ and range 109㎛, 110㎛, 12㎛.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.52-52
• /
• 2002

Recently, nanoporous low-k materials using porogen (pore generating material) template method have gained much attraction due to the feasible advantage of dielectric constant decrease with the increase of porogen content, which is burning out and making air void by thermal curing. In nanoporous thin films, further, control of pore size and its distribution is very important to retain suitable thermal, mechanical and electrical properties. In this study, nanoporous low-k films were prepared with MTMS-BTMSE copolymer and porogen. The effect of interaction of copolymer matrix and porogen on pore size and distribution was comparatively to investigate with molecular structure and end functional group. The characterization of nanoporous thin film prepared was also performed using various techniques including NMR, GPC, Ellipsometer, FE-SEM, TGA, and FT-IR.

• 자동차안전학회지
• /
• 제12권2호
• /
• pp.14-20
• /
• 2020

This paper presents a vehicle mass and road grade estimator for developing an automated bus. To consider the dynamic characteristics of a bus varying with the number of passengers, the longitudinal controller needs the estimation of the vehicle's mass and road grade in real-time and utilizes the information to adjust the control gains. Discrete Kalman filter is applied to estimate the time-varying road grade, and the recursive least squares algorithm is adopted to account for the constant mass estimation. After being implemented in MATLAB/Simulink, the estimators are evaluated with the dynamic model and experimental data of the target bus. The proposed estimators will be applied to complement the algorithm of the longitudinal controller and proceed with algorithm verification.

• 한국과학교육학회지
• /
• 제5권1호
• /
• pp.11-17
• /
• 1985

This study had its objective to indentify the basic biological concepts as recommended by scholars in biology and by high school biology teachers for inclussion in the high school biology curriculum and to determine the importance levels of the concepts. The scholars for this study were selected to insure that their majors are evenly distributed across the biological areas. The final concept list contains 137 biological concepts along with their importance level judged by the scholars and high school biology teachers. The biological concepts are categorized into 12 biological areas. This study suggests that the concepts in the final list can not refect the conceptual hierarchy or inclusiveness, goals or objectives of biology education in the high school, and difficulty levels of the concepts. This study also claims that the concept list like the one produced by this study should be successively' checked and revised due to the continuous development of biological knowledge system and the constant change in the meanings of the knowledge system.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.43-46
• /
• 1998

The effect of dopant and stoichiometry on the optical properties of LiNbO3 were studies. We prepared three samples, which are undoped, MgO doped LiNbO3 and near-stoichiometric LiNbO3 dielectric constant and transmittance in UV/VIS/IR light range were measured. The results showed that the features for high [Li]/[Nb] were similar to those for low [Li]/[Nb] but with high [Mg].

• Bulletin of the Korean Chemical Society
• /
• 제6권1호
• /
• pp.37-40
• /
• 1985

The electrical conductance and UV absorbance of 4,N-dimethyl Pridinium Iodide (NDMPI) were measured in the ethanol volume percentage, 95, 90, 80 and 60 of an ethanol-water mixture at 15, 25, 35 and $45^{\circ}C$. Ionic association constants(K) of NDMPI were evaluated in accordance with a combined method of conductance UV absorbance. The ion size parameter (${\gamma}_{\pm}$) and dipole momemt (${\mu}_{A+D-}$) of NDMPI were obtained from the values of K and dielectric constant. The ${\mu}_{A+D-}$- values were in good agreement with the values of transition moment(${\mu}_{mn}$) which is calculated form the UV peak values. The large negative values of the electrical enthalpy (${\Delta}H_{el}^{\circ}$) and entropy (${\Delta}H_{el}^{\circ}$ ) have proved that NDMPI had a positive hydration. The positive values of entropy (${\Delta}S^{\circ}$) means the formation of NDMPI ion goes with dehydration.

• 한국임상보건과학회지
• /
• 제2권1호
• /
• pp.59-71
• /
• 2014

Purpose. Medical tourism is recently becoming a new industry with great growth potential. The South Korean government is shifting medical tourism from simple cultural tourism to a high value-added industry with a new paradigm. Methods. The government has been providing positive support and marketing policies since the introduction of the article concerning foreign patient attraction to the medical law in 2009, and various types of medical institutions around the country has participated actively in medical tourism by themselves or in cooperation of government bodies and made increasingly greater performance. Results. This study obtained the following results. The medical institutions in Korea have been making efforts to see more development and profitability in diverse ways, including medical tourism for foreign patients and the advance of the Korean medical institutions into foreign markets. However, many local governing bodies and medical institutions participating in medical tourism around the country have primarily focused on examination and treatment on the basis of foreign patients' visit to South Korea and rarely built a medical network with other countries directly for medical tourism. This study presents a case of building a local medical network and a network for international medical tourism successfully on the basis of the local medical association, CMP, which has been formed naturally in Busan. The success factors for CMP included 1) enthusiasm of the official in charge; 2) the medical level, the service level, and open-mindedness of participant medical institutions; 3) cost efficiency due to executive office management with no costs, no conflicts, and constant partnership; 4) security of non-competitive expertise for participants; 5) local factors of CMP; 6) participation of good agencies; 7) reinforcement of participation networks; and 8) post facto management and local doctor management. Conclusions. Its positive effects included patient introduction and greater profitability on an internal basis as well as construction of the collaboration system with the institutions related to medical tourism and confidence. However, there are some limitations: it is still difficult to predict performance due to the short period of their activities, and it is necessary to continue to observe their constant activities since a single medical association was involved.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.160-168
• /
• 2006

The conductances of trimethyltetradecylammonium bromide (TTAB) plus triphenyltetradecyl phosphonium bromide (TTPB) and TTAB plus trimethylhexadecylammonium bromide (HTAB) over the entire mole fraction range of TTAB were measured in water and in cyclodextrin plus water mixtures at fixed 4 and 8 mM of cyclodextrin at $30^{\circ}C$. The conductivity plot for both binary mixtures shows a single break from which the mixed critical micelle concentration and degree of micelle ionization were computed. From the slope of the conductivity curve, the equivalent ionic conductivities of the monomeric, associated, and the micelle states were calculated and discussed with respect to the surfactant-cyclodextrin complexation in the whole mole fraction range of both surfactant binary mixtures. The association constant K between the respective monomeric surfactant and cyclodextrin cavity of fixed 4 mM cyclodextrin was computed by considering 1:1 association from the surface tension measurement. A comparison among the K values for HTAB-cyclodetrin, TTAB-cyclodextrin, and TTPB-cyclodextrin shows that the former complexation is significantly stronger in comparison to the other ones due to the longer hydrophobic tail.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권7호
• /
• pp.1013-1018
• /
• 2014

In this study, we developed kinetic models to predict the growth of pathogenic Escherichia coli on cheeses during storage at constant and changing temperatures. A five-strain mixture of pathogenic E. coli was inoculated onto natural cheeses (Brie and Camembert) and processed cheeses (sliced Mozzarella and sliced Cheddar) at 3 to 4 log CFU/g. The inoculated cheeses were stored at 4, 10, 15, 25, and $30^{\circ}C$ for 1 to 320 h, with a different storage time being used for each temperature. Total bacteria and E. coli cells were enumerated on tryptic soy agar and MacConkey sorbitol agar, respectively. E. coli growth data were fitted to the Baranyi model to calculate the maximum specific growth rate (${\mu}_{max}$; log CFU/g/h), lag phase duration (LPD; h), lower asymptote (log CFU/g), and upper asymptote (log CFU/g). The kinetic parameters were then analyzed as a function of storage temperature, using the square root model, polynomial equation, and linear equation. A dynamic model was also developed for varying temperature. The model performance was evaluated against observed data, and the root mean square error (RMSE) was calculated. At $4^{\circ}C$, E. coli cell growth was not observed on any cheese. However, E. coli growth was observed at $10{\circ}C$ to $30^{\circ}C$C with a ${\mu}_{max}$ of 0.01 to 1.03 log CFU/g/h, depending on the cheese. The ${\mu}_{max}$ values increased as temperature increased, while LPD values decreased, and ${\mu}_{max}$ and LPD values were different among the four types of cheese. The developed models showed adequate performance (RMSE = 0.176-0.337), indicating that these models should be useful for describing the growth kinetics of E. coli on various cheeses.