• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.184-197
• /
• 2016

This study investigates human-robot interactions in a museum environment. Unlike robots in movies, robots in real life do not have 'personality,' but instead have a specific purpose and function. This research is primarily about the assignment of specific and appropriate personalities to robots in different contexts. Methods by which a definite personality can be imparted on a robot are discussed in this research. Previous research has addressed attempts to assign a robot personality based on the task context. However, the discussion of robot personality is incomplete. Therefore, we assumed that a robot's character was dependent on the characteristics of its location of use. We planned a $2{\times}2$ comparison of various robot personalities, i.e., introverted or extroverted paired with either a traditional museum or a process-oriented experiential experience. Based on Schmitt's (1999) strategic experiential modules, experiential factors were derived for each set of conditions. To achieve the objectives of the research, theoretical and empirical research were conducted simultaneously. The software JMP 9 was used to verify the research model and hypotheses.

• Journal of The Korean Association of Information Education
• /
• v.8 no.2
• /
• pp.167-176
• /
• 2004

Due to the development of information communication technology, educational environment has undergone much change and various types of teaching and learning methods based on information communication technology has been suggested. Recently, remote education using the internet are also spreading. However, in current classrooms, students are asked to do an teacher-centered assignment, which they are required to collect and report some information using the internet. This method does not help students use the advantages of learning using the internet, which stimulate students-students interaction and teacher-students interaction.Thus, this study focused on the problem-based learning system based on video communication technology. The researcher designed the problem-based learning system based on video communication technology and applied the system to classes at elementary school. The results were analyzed in terms of students-students interaction and teacher-students interaction in the internet. This research found that the problem-based learning system stimulates teacher and students communication and has positive effects on students' attitude and interest in learning. This research proposes that the traditional teacher-centered teaching method can be supplemented with cyber space learning, which has the merit of problem-based learning model.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2196-2203
• /
• 1999

This paper describes the bus scheduling problem and register optimization method in datapath synthesis. Scheduling is process of operation allocation to control steps in order to minimize the cost function under the given circumstances. For that purpose, we propose some formulations to minimize the cost function for bus assignment to get an optimal and minimal cost function in hardware allocations. Especially, bus and register minimization technique are fully considered which are the essential topics in hardware allocation. Register scheduling is done after the operation and bus scheduling. Experiments are done with the DFG model of fifth-order digital ware filter to show its effectiveness. Structural integer programming formulations are used to solve the scheduling problems in order to get the optimal scheduling results in the integer linear programming environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.451-457
• /
• 2006

A peer-to-peer(P2P) network is inherently vulnerable to malicious attacks from participating peers because of its open, flat, and autonomous nature. This paper addresses the problem of effectively defending from active attacks of malicious peers at bootstrapping phase and at online phase, respectively. We propose a secure membership handling protocol to protect the assignment of ID related things to a newly joining peer with the aid of a trusted entity in the network. The trusted entities are only consulted when new peers are joining and are otherwise uninvolved in the actions of the P2P networks. For the attacks in online phase, we present a novel message structure applied to each message transmitted on the P2P overlay. It facilitates the detection of message alteration, replay attack and a message with wrong information. Taken together, the proposed techniques deter malicious peers from cheating and encourage good peers to obey the protocol of the network. The techniques assume a basic P2P overlay network model, which is generic enough to encompass a large class of well-known P2P networks, either unstructured or not.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.39-45
• /
• 1993

We have examined Raman spectra of cis-peptide model complex, diketopiperazine in water and $D_2O$ with 320 nm through 218 nm excitation. Our study examines assignment of the resonance enhanced amide vibrations and characterizes their enhancement mechanism. Three resonance enhaned cis-peptide marker bands were observed in aqueous solution at 1676, 1533 and $806cm^{-1}$, which were assigned to the cis-amide I, II and S band, respectively. The $1533cm^{-1}$ amide II band, which is almost pure C-N stretching, was most dominant in water and shifted to $1520cm^{-1}$ upon N-deuteration. This band will be probably a potential probe band for cis-peptide moieties in proteins. The excitation profile data and an Albrecht A-term fit indicated that the cis-peptide vibrations derive their intensities from the 188 nm cis-peptide ${\pi}-{\pi}^*$ electronic transition. We Propose that the geometry of cis-peptide ${\pi}^*$ excited state is C-N bond displacement relative to that of electronic ground state.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.135-144
• /
• 2010

This study explores whether or not marriage and other family values operate as factors that influence the willingness of women to voluntarily remain ever-single. The study includes as variables the sub-fields of marriage and family values that consist of traditional gender role awareness, freedom in sexual attitude, open outlook on marriage, familism, an acceptance of diverse families, fear of marriage, and assignment of value to extramarital factors. Participants of this study were 259 women in their twenties to forties with no experience of marriage, which were selected from the data used in the Korean Women's Development Institute's Investigation of Single Households(2007). Upon inserting value-related variables and sociodemographic variables into a binomial logistic model for analysis, age, open outlook on marriage, assigned value on extramarital factors, and an acceptance of diverse families were shown to be factors influencing the willingness of women to remain ever-single. That is, as the age spectrum is lower, outlook on marriage is open, more values are granted on the extramarital factors, and the degree of an acceptance of diverse views on family is higher, the chances that women would remain ever-single voluntarily were shown to increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.911-918
• /
• 2008

In this paper, we propose new cell structures using multi-hop Relay Station(RS) based on IEEE802.16j in Narrow-Beam Trisector Cell (NBTC) and Wide-Beam Trisector Cell (WBTC), which are two methods for cell sectorization using 3-sector directional antennas. Then, we analyze our proposed structures compared with the existing system which does not use any RS about the numbers of optimized Base Station (BS) and multi-hop relay, the extended BS coverage, and the deployment cost according to the traffic density using optimization model. According to the results, we know the reduction of total deployment cost of the proposed systems and that WBTC is suitable when the traffic density is high and NBTC is suitable when the traffic density is low in our proposed multi-hop based NBTC and WBTC structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.431-441
• /
• 1997

In this paper, a performance evaluation method for the Trunked Land Mobile Radio System, so called TRS(Trunked Radio System), is presented. The proposed evaluation method employs LCD(Lost Call Delayed) system model and Erlang-C distribution. In this system, queues are used to hold call requests that are initally blocked. When a user attempts a call and a channel is not immediately available, the call request may be delayed until a channel becomes available. For evaluating system performance, therefore, the probability that any caller is delayed in the queue for a waiting time greater than t seconds is derived and simulated by using such parameters as total number of available channels, traffic load and average duration of a call. Furthermore, the performance of the message and the transmission trunked channel assignment strategies is compared. The performance simulation results show that transmission trunking is shown to be more efficient than message trunking.

• Structural Engineering and Mechanics
• /
• v.37 no.6
• /
• pp.671-684
• /
• 2011

Deciding on an optimal sensor placement (OSP) is a common problem encountered in many engineering applications and is also a critical issue in the construction and implementation of an effective structural health monitoring (SHM) system. The present study focuses with techniques for selecting optimal sensor locations in a sensor network designed to monitor the health condition of Dalian World Trade Building which is the tallest in the northeast of China. Since the number of degree-of-freedom (DOF) of the building structure is too large, multi-modes should be selected to describe the dynamic behavior of a structural system with sufficient accuracy to allow its health state to be determined effectively. However, it's difficult to accurately distinguish the translational and rotational modes for the flexible structures with closely spaced modes by the modal participation mass ratios. In this paper, a new method of the OSP that computing the mode shape matrix in the weak axis of structure by the simplified multi-DOF system was presented based on the equivalent rigidity parameter identification method. The initial sensor assignment was obtained by the QR-factorization of the structural mode shape matrix. Taking the maximum off-diagonal element of the modal assurance criterion (MAC) matrix as a target function, one more sensor was added each time until the maximum off-diagonal element of the MAC reaches the threshold. Considering the economic factors, the final plan of sensor placement was determined. The numerical example demonstrated the feasibility and effectiveness of the proposed scheme.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.347-350
• /
• 2004

A space radiation analysis has been used to evaluate an ability of electronic equipment boxes or spacecrafts to endure various radiation effects, so it helps design thicknesses of structure and allocate components to meet the radiation requirements. A comparison study of space radiation dose analysis programs SPENVIS Sectoring Tool (SST) and SIGMA II is conducted through some structure cases, simple sphere shell, box and representative satellite configurations. The results and a discussion of comparison will be given. A general comparison will be shown for understanding those programs. The both programs use the same strategy, solid angle sectoring with ray-tracing method to produce an approximate dose at points in representative simple and complex models of spacecraft structures. Also the particle environment data corresponding to mission specification and radiation transport data are used as input data. But there are distinctions between them. The specification of geometry model and its input scheme, the assignment of dose point and the numbers, the prerequisite programs and ways of representing results will be discussed. SST is a web-based interactive program for sectoring analysis of complex geometries. It may be useful for a preliminary dose assessment with user-friendly interfaces and a package approach. SIGMA II is able to obtain from RSICC (Radiation Safety Information Computational Center) as a FOR-TRAN 77 source code. It may be suitable for either parametric preliminary design or detailed final design, e.g. a manned flight or radiation-sensitive component configuration design. It needs some debugs, recompiling and a tedious work to make geometrical quadric surfaces for actual spacecraft configuration, and has poor documentation. It is recommend to vist RSICC homepage and GEANT4/SSAT homepage.