• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3660-3671
• /
• 2022

A new methodology to derive a dose constraint for radioactive effluent from a unit of nuclear power plant (NPP) through retrospective assessment was developed to reflect operational flexibility in line with international standards. The new dose constraint can retain the safety margin between the offsite dose and the past dose constraints. As case studies, the new approach was applied to 24 Korean NPPs to address the limitations of the existing seven dose constraints that do not fully comply with current international radiation protection standards. Therefore, an effective dose constraint for Korean NPPs was proposed as no less than 0.15 mSv/y, which is comparable to the international practices and previous studies (0.05-0.3 mSv/y). Although the lower bound of the equivalent dose constraint was calculated as 0.17 mSv/y, it is not proposed in this study since the compliance with the derived effective dose constraint can prevent accompanied equivalent doses to any organs from exceeding equivalent dose limits. The new framework and the case studies are expected to contribute toward and support the revision of existing dose constraints for radioactive effluent from NPPs, ensuring better compliance with the current international safety standards as well as reflect the operational flexibility in practice.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.530-545
• /
• 2023

As an alternative to conventional management options for a lot of concrete waste from decommissioning of nuclear power plants, a set of scenarios for controlled recycling of decommissioning concrete waste as engineered barriers of a radioactive waste repository was proposed, and a comprehensive safety assessment model and framework covering both pre-and post-closure phases was newly developed. The new methodology was applied to a reference vault-type repository, and the ratios of derived concentration limits to unconditional clearance levels of eighteen radionuclides for controlled recycling were provided for three sets of dose criteria (0.01, 1, and 20 mSv/y for the pre-closure and 0.01 mSv/y for the post-closure phases). It turns out that decommissioning concrete waste whose concentration is much higher than the unconditional clearance level can be recycled even when the dose criterion 0.01 mSv/y is applied. Moreover, a case study on ABWR bio-shield shows that the fraction of recyclable concrete waste increases significantly by increasing the dose criterion for the radiation worker in the pre-closure phase or the duration of storage prior to recycling. The results of this study are expected to contribute to demonstrating the feasibility of controlled recycling of a lot of decommissioning concrete waste within nuclear sectors.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2047-2052
• /
• 2023

Risk-informed approach has been widely applied in the safety design, regulation, and operation of nuclear reactors. It has been commonly accepted that risk-informed design optimization should be used in the innovative reactor designs to make nuclear system highly safe and reliable. In spite of the risk-informed approach has been used in some advanced nuclear reactors designs, such as Westinghouse IRIS, Gen-IV sodium fast reactors and lead-based fast reactors, the process of risk-informed design of nuclear reactors is hardly to carry out when passive system reliability should be integrated in the framework. A practical method for new passive safety reactors based on probabilistic safety assessment (PSA) and passive system reliability analyze linking is proposed in this paper. New three-dimension frequency-consequence curve based on risk concept with three variables is used in this method. The proposed method has been applied to the determination optimization of design options selection in a 10 MWth lead-based research reactor(LR) to obtain one optimized system design in conceptual design stage, using the integrated reliability and probabilistic safety assessment program RiskA, and the computation resources and time consumption in this process was demonstrated reasonable and acceptable.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.311-317
• /
• 2011

There is a growing concern in reducing greenhouse gas emissions all over the world. The U.K. has set 34% target reduction of emission before 2020 and 80% before 2050 compared to 1990 recently in Post Copenhagen Report on Climate Change. In practise, Life Cycle Cost (LCC) and Life Cycle Assessment (LCA) tools have been introduced to construction industry in order to achieve this such as. However, there is clear a disconnection between costs and environmental impacts over the life cycle of a built asset when using these two tools. Besides, the changes in Information and Communication Technologies (ICTs) lead to a change in the way information is represented, in particular, information is being fed more easily and distributed more quickly to different stakeholders by the use of tool such as the Building Information Modelling (BIM), with little consideration on incorporating LCC and LCA and their maximised usage within the BIM environment. The aim of this paper is to propose the development of a model-based LCC and LCA tool in order to provide sustainable building design decisions for clients, architects and quantity surveyors, by then an optimal investment decision can be made by studying the trade-off between costs and environmental impacts. An application framework is also proposed finally as the future work that shows how the proposed model can be incorporated into the BIM environment in practise.

• 한국항공운항학회지
• /
• 제32권3호
• /
• pp.189-195
• /
• 2024

K-drone delivery system is a commercial delivery system that ensures compliance with aviation safety. It is equipped with flight routes for automated deliveries and features a drone identification device along with a real-time monitoring system for drone positions. This study proposes the application of an ICAO SMS-based safety management system as an appropriate safety management framework that non-aviation personnel drone operators can adopt. It suggests that applying an ICAO SMS-based safety management system to the K-drone delivery system, similar to Europe and the USA, is valid. To introduce ICAO SMS into the K-drone delivery system, procedures must be established for building a drone safety management system, from business registration to drone operation and training. The main components of the drone safety management system are presented, including 8 items: safety policy and authority and responsibility, risk management, safety assurance, safety promotion, drone control system, drone delivery operation manual, drone maintenance manual, and accident response, incorporating the four fundamental elements of ICAO SMS and European Light UAV operator Certificate standards. Additionally, as a core aspect of the drone safety management system, a seven-step risk assessment procedure is proposed, which includes basic risk identification, hazard identification, risk scenario development, calculation of severity and likelihood, SMS matrix risk assessment, mitigation measures, and implementation determination.

• 한국물환경학회지
• /
• 제33권2호
• /
• pp.219-229
• /
• 2017

A watershed-river linked modeling system was developed to forecast the water quality, particularly weekly changes in chlorophyll-a concentration, of the Yeongsan River, Korea. Hydrological Simulation Program-Fortran (HSPF) and Environmental Fluid Dynamics Code (EFDC) were adopted as the basic model framework. In this study, the EFDC model was modified to effectively simulate the operational condition and flow of multi-functional weirs constructed in the main channel of rivers. The model was tested against hydrologic, water quality and algal data collected at the right upstream sites of two weirs in 2014. The mean absolute errors (MAEs) of the model calibration on the annual variations of river stage, TN, TP, and algal concentration are 0.03 ~ 0.10 m, 0.65 ~ 0.67 mg/L, 0.03 ~ 0.04 mg/L, and $9.7{\sim}10.8mg/m^3$, respectively. On the other hand, the MAE values of forecasting results for chlorophyll-a level at the same sites in 2015 range from 18.7 to $22.4mg/m^3$, which are higher than those of model calibration. The increased errors in forecasting are mainly attributed to the higher uncertainties of weather forecasting data compared to the observed data used in model calibration.

• 한국환경과학회지
• /
• 제26권3호
• /
• pp.345-362
• /
• 2017

The primary purpose of this study was to determine the risk of various disease outcomes due to exposure to cyanobacteria toxin (microcystin-LR) through drinking water in a Korean watershed. In order to determine the risk in a more quantitative way, the risk assessment framework developed by the National Research Council (NRC) of the United States (US) - hazard identification, dose-response relationship, exposure assessment, and risk characterization - was used in this study. For dose-response relationships, a computer software (BenchMark Dose Software (BMDS)) developed by the US Environmental Protection Agency (EPA) was used to fit the data from previous studies showing the relationship between the concentration of microcystin-LR and various disease outcomes into various dose-response models. For exposure assessment, the concentrations of microcystin-LR in the source water and finished water in a Korean watershed obtained from a recent study conducted by the Ministry of Environment of Korea were used. Finally, the risk of various disease outcomes due to exposure to cyanobacteria toxin (microcystin-LR) through drinking water was characterized by Monte-Carlo simulation using Crystall Ball program (Oracle Inc.) for adults and children. The results of this study suggest that the risk of disease due to microcystin-LR toxin through drinking water is very low and it appears that current water treatment practice should be able to protect the public from the harmful effects of cyanobacteria toxin (microcystin-LR) through drinking water.

• Journal of Construction Engineering and Project Management
• /
• 제3권3호
• /
• pp.1-9
• /
• 2013

Environmental problems like global warming have now become important issues that should be considered in all industries, including construction. In South Korea, many studies have been conducted to achieve the government's goals of reduction in environmental impacts. However, the research on buildings has only focused on CO2 emission as a research target despite the fact that other environmental impacts resulting from ozone depletion and acidification should also be considered, in addition to global warming. In this regard, this study attempted to propose assessment criteria and methods to evaluate the environmental performance of the structures from various aspects. The environmental impact category can be divided into global impacts, regional impacts, and local impacts. First, global impacts include global warming, ozone layer depletion, and abiotic resource depletion, while regional impacts include acidification, eutrophication, and photochemical oxidation. In addition, noise and vibration occurring in the building construction phase are defined as local impacts. The evaluation methods on the eight environmental impacts will be proposed after analyzing existing studies, and the methods representing each environmental load as monetary value will be presented. The methods presented in this study will present benefits that can be obtained through green buildings with a clear quantitative assessment on structures. Ultimately, it is expected that if the effects of green buildings are clearly presented through the findings of this study, the greening of structures will be actively expanded.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.139-150
• /
• 2017

The structural strain plays a significant role in structural condition assessment of in-service bridges in terms of structural bearing capacity, structural reliability level and entire safety redundancy. Therefore, it has been one of the most important parameters concerned by researchers and engineers engaged in structural health monitoring (SHM) practices. In this paper, an SHM system instrumented on the Jiubao Bridge located in Hangzhou, China is firstly introduced. This system involves nine subsystems and has been continuously operated for five years since 2012. As part of the SHM system, a total of 166 fiber Bragg grating (FBG) strain sensors are installed on the bridge to measure the dynamic strain responses of key structural components. Based on the strain monitoring data acquired in recent two years, the strain-based structural condition assessment of the Jiubao Bridge is carried out. The wavelet multi-resolution algorithm is applied to separate the temperature effect from the raw strain data. The obtained strain data under the normal traffic and wind condition and under the typhoon condition are examined for structural safety evaluation. The structural condition rating of the bridge in accordance with the AASHTO specification for condition evaluation and load and resistance factor rating of highway bridges is performed by use of the processed strain data in combination with finite element analysis. The analysis framework presented in this study can be used as a reference for facilitating the assessment, inspection and maintenance activities of in-service bridges instrumented with long-term SHM system.

• Journal of Community Nutrition
• /
• 제2권1호
• /
• pp.71-84
• /
• 2000

This paper presents the status of nutrition education for older adults in Korea, and examines considerations in developing effective nutrition education programs for the elderly based on literature reviews. Finally, strategies of nutrition education for older adults in Korea are examined. Status of nutrition education were examined by surveying 90 senior centers, and 46 public health centers providing nutrition services. Most senior centers(96%) provided health education programs, however, nutrition was only a part of health programs. Among the 41 public health centers which responded to the survey, 73.1% provided nutrition education for older adults. The frequently covered topics were prevention & management of hypertension/stroke, diabetes, nutritional management during later adulthood, and osteoporosis. Common barriers in planning and implementing elderly education were; lack of educational materials for older adults, reliance on lectures, difficulty in following-up. To develop effective nutrition education, four stages consisting of needs assessment, planning and implementation of programs, and evaluation should be carefully done. Needs assessment might be done using quantitative or qualitative assessment. Factors influencing nutrition behavior of older adults can be systematically examined using a theoretical approach such as the PRECEDE-PROCEED framework. Qualitative methods, such as focus group interviews, also provide insightful information regarding the needs of older adults. In planning nutrition education programs, physical and pshychological changes associated with aging should be considered. Literature regarding elderly education suggest that active participation or participatory learning is also effective for older adults. Educational materials are developed following the principle of KISS and pre-tested. Program evaluation has been rarely done in practice, although it provides valuable feedback to the program. Strategies for developing nutrition education for Korean elderly include; performing needs assessment, developing a standard program by topics in a logical and systematic way, developing programs for subgroups of elderly, applying diverse education methods developing educational materials for the elderly, evaluating programs using simple tools, and delivering a nutrition program as a part of health promotion program. Finally, the interaction and communication between researchers and practitioners is strongly recommended to ensure better nutrition education and services to the elderly.