• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.83-86
• /
• 2010

대기 분야에 GIS를 적용하여 대구지역 PM-10 측정망의 위치가 적절한지 평가하고, 공중보건과 밀접한 관련이 있는 PM-10을 관리하기 위한 적합한 장소를 모색하였다. 본 연구에서 GIS 기법을 사용하여 대구광역시에 설치된 PM-10 대기측정망 측정소를 분석한 결과, 설치된 위치의 적절성은 지역의 대표성을 포함하지 않고, 성향별(학교, 주거, 산업)로도 용도지역, 지목, 주변지역이 상이하기 때문에 PM-10 측정망의 설치장소가 부적절하다고 사료된다. 대구지역 뿐만 아니라 타 도시에서도 공중의 보건을 위해 측정망의 구체적인 설치 장소 선정 및 재배치가 필요할 것이라 판단된다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.207-210
• /
• 2003

Vacuum hot pressing has been used for the development of Ti-MMCs using foil-fiber-foil method, and subsequent micro-mechanical characteristics of the composites are evaluated by means of several experimental processes. As shown by the results, fiber strength degradation occurs during the consolidation, and particularly residual stresses results from the thermal expansion mismatch between fiber and matrix materials during cooling process are incorporated in the changes of mechanical properties of the composites. In industrial applications, the processing conditions avoiding micro-material failures are important together with the properties of finished products, and therefore should be included in the assesment of the material characterization.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.240-245
• /
• 2001

Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, other materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to various factors. In this study, the probability of detection, used logistic probability model and Monte Carlo simulation, estimated the reliability of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test applied these models.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.1010-1013
• /
• 2000

In this study, a failure mode analysis of CNC machining center is described. At first, the system is classified through subsystems into components using part lists and drawings. The components failure rate and failure mode analysis are performed to identify the weak components of a machining center with reliability database. The failure probabilistic function of mechanical part is analyzed by Weibull distribution. The Kolmogorov-Smirnov test is also used to verify the goodness of fit.

• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.137-153
• /
• 2000

The purpose of this study was to develop long and short-run educational programs for u-turn farmers based on their need assesment. This study was conducted by review of literature and surveys. Subjects of this surveys were 310 participants of agricultural training programs developed by the Rural Development Administration for u-turn farmers in 1997 and 1998. According to major findings, many participants were faced with problems such as financial shortage, deficiency of farming skills, difficulty of marketing, new neighbours unfavourable gazing and farm labour shortage. These problems could be classified into the problems at their preparing stage and the problems of adjusting stage in their farms. And also the participants suggested that educational programs for them contain knowledge based teaching and technical practices with focus on their problems solving. With their suggestion various knowledge and technical modules were selected. Using these module several kinds of long and short-run educational programs could be developed.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.39-43
• /
• 2014

Electronic monitoring system was recently introduced as an effective means of controlling certain criminal offenders. Korean society manages ex-convicts only in reliance on the electronic monitoring system, which has a clear limit. For this reason, The reorientation program should be put before anything to subdivide the perpetrators equipped with the electronic monitoring device and separate them from the others from the start, or identify their criminal propensity and heal them.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1806-1813
• /
• 2010

In this paper, we investigate the development process of the quality assurance system ISO9001 in the railway industry and ISO/TS 16949 the quality system in the automotive industry. We study the international standard IRIS(International Railway Industry Standard) & TSI(Technical Specification for Interoperability) applied in railway industry. Throughout studying for the whole development process of the Rolling Stock Quality System, we are to review the necessity of the monitoring process and assesment process applied in IRIS & TSI guidelines. It will be the keystone enhancing our quality level to global level in railway industry.

• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.379-384
• /
• 1997

The biodegradable characteristics of poly-$\beta$-hydroxybutyrate(PHB) film by fun맥 and soil burial are Investigated. As the results of the American Standards for Testing and Materials(ASTM) method, the you of Aspergillus niger was apparent on the PHB containing plate. This suggests that PHB was utilized as the sole carbon source by Aspergillus niger and ASTM method may have applications as measuring means of biome gradability of polyhydroxyalkanoic acid(PHA). PHB film was studied by monitoring the time-dependant changes in weight loss of PHB film under 30% and relative humidity 80 % during pot-test. As the results of pot-test, PHB film was decomposed about 87 % in 30 days by soul microorganisms. PHB film was more slowly degraded than PHB/HV film.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2311-2315
• /
• 2009

This paper presents a method to apply energy margin for assesment of total transfer capability (TTC). In order to calculate energy margin, two values of the transient energy function have to be computed. The first value is transient energy that is the sum of kinetic and potential energy at the end of fault. The second is critical energy that is potential energy at controlling UEP(Unstable Equilibrium Point). It is seen that TTC level is determined by not only bus voltage magnitudes and line thermal limits but also transient stability. TTC assessment is compared by the repeated power flow(RPF) method and optimization method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1450-1451
• /
• 2008

To investigate the reliability of the conductive lines patterned by ink-jet printing, we evaluated the reliability of the ink-jet printed silver (Ag) patterns according to the guide lines built up as assessments methods in the production of conventional rigid printed circuit boards. The assessment methods include the uniformity of line width and space, adhesive strength, dielectric withstand, solder float, thermal shock test and pressure cooker test (PCT). To prepare assesment vehicles, different regular test patterns were created by Ag ink-jet printing on the same polyimide substrate for each of assessment methods.