• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.472-481
• /
• 2015

Objectives: Welding is a major task in shipbuilding yards that generates welding fumes. A significant amount of welding in shipbuilding yards is done on steel. Inevitably, manganese is present in the base metals being joined and the filler wire being used and, consequently, in the fumes to which workers are exposed. The objective of this work was to characterize manganese exposure associated with work area, total and particle size-selective mass concentration, and compare the mass concentrations obtained using a three-piece cassette sampler, size-selective impactor sampler and blood manganese concentrations. Materials: All samples were collected from the main work areas at one shipbuilding yard. We used a three piece cassette sampler and the eight stage cascade impactor sampler for the airborne manganese mass concentration of total and all size fractions, respectively. In addition, we used the results of health examination of workers sampled for airborne manganese. Results: The oder of high concentration of airborne manganese in shipbuilding processes was as follows; block assembly, block erection, outfitting installation, steel cutting, and outfitting preparation. The percentages of samples that exceeded the OES of the ministry of employment and labor by the cassette sampling method was 12.5%, however 59.1% of sampled workers by the impactor sampling method exceeded the TLV of the ACGIH. Conclusions: Even though the manganese concentrations in blood of workers exposed to higher airborne manganese concentration were higher than among those exposed to lower concentrations, there was no difference in blood manganese concentrations among work duration. The data analyzed here by characterizing size-selective mass concentrations indicates that the inhaled manganese of welders in shipbuilding yards could be mostly manganese-containing respirable particle sizes.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.45-52
• /
• 2006

보강토옹벽 구조물의 안정평가 및 관리는 변위 침하계측기 등에 의해 이루어지고 있고 Total Station 등을 이용한 측량장비들도 계측에 이용되고 있다. 그러나 이러한 계측은 대부분 국부적이며, 붕괴가 예상되는 경우에만 이루어지고 있다. 이와 같은 기존의 계측시스템은 계측기의 내구성 및 관리 측면에서 많은 경제적 손실이 야기되고 있어 측정값의 신뢰성에도 많은 문제가 발생하고 있다. 따라서 본 연구에서는 기존 시스템의 단점을 극복하기 위해 개발된 수치사진영상을 이용한 계측시스템을 실내시험을 통하여 보강토옹벽의 변위계측에 적용 실시하였다. 시험결과, 옹벽의 벽면변위계측이나 변형 및 균열 등의 계측을 위한 계측시스템으로 활용이 가능할 것으로 판단되었다.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.152-158
• /
• 2014

본 연구에서는 저온유동성 성능검사 시스템 구현을 통해 디젤 차량용 통합형 연료히터의 성능을 평가한다. 저온 유동성 시험장치에서 $+20{\sim}-30^{\circ}C$ 온도범위에 따라 분리형과 통합형 연료히터 성능을 비교하고, 필터 전후에 따라 유압과 시동시간, 히터의 소모전력을 측정한다. 이때 다양한 종류의 필터면적을 사용함으로써 통합형 연료히터와 분리형을 비교한 결과 시동 시간이 23% 향상되었고, 저온시동성능은 19% 정도 향상된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.558-564
• /
• 2013

A simple and effective method is introduced to synthesize a series of polystyrene-b-poly(oligo(ethylene oxide) monomethyl ether methacrylate)-b-polystyrene (PSt-b-POEOMA-b-PSt) triblock copolymers. The structures of PSt-b-POEOMA-b-PSt copolymers were characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance ($^1H$ NMR) spectroscopy. The molecular weight and molecular weight distribution of the copolymer were measured by gel permeation chromatography (GPC). Furthermore, the self-assembling and drug-loaded behaviours of three different ratios of PSt-b-POEOMA-b-PSt were studied. These copolymers could readily self-assemble into micelles in aqueous solution. The vitamin E-loaded copolymer micelles were produced by the dialysis method. The micelle size and core-shell structure of the block copolymer micelles and the drug-loaded micelles were confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The thermal properties of the copolymer micelles before and after drug-loaded were investigated by different scanning calorimetry (DSC). The results show that the micelle size is slightly increased with increasing the content of hydrophobic segments and the micelles are still core-shell spherical structures after drug-loaded. Moreover, the glass transition temperature (Tg) of polystyrene is reduced after the drug loaded. The drug loading content (DLC) of the copolymer micelles is 70%-80% by ultraviolet (UV) photolithography analysis. These properties indicate the micelles self-assembled from PSt-b-POEOMA-b-PSt copolymers would have potential as carriers for the encapsulation of hydrophobic drugs.

• Journal of Microbiology and Biotechnology
• /
• 제11권5호
• /
• pp.825-830
• /
• 2001

Escherichia coli, which harbored the ars operon from a plasmid pMH12 of Klebsiella oxytoca D12, showed filamentation due to the expression of ars genes in the presence of arsenite. The continued DNA replication in the absence of cell division was revealed, since nucleoids abound with DAPI appeared to be arranged in chains. In contrast to overexpression of arsA, its frame-shift mutant and knock-out mutant lost filamentation in the presence of arsenite, which suggested that ars-induced division block was dependent on expression of arsA. ArsA-induced division inhibition was not a consequence of an inhibition of DNA replication, and the inability of arsenite to induce an SOS response indicated that arsA-mediated division inhibition was dependent on the expression of the gene product encoded by the minB operon. ArsA is a peripheral membrane protein with an ATP-binding domain, which is homologous to MinD that requires ATP-dependent efflux. These results suggested that ArsA could possibly recruit MinC to the membrane and modulate cytoplasmic FtsZ to block assembly at the middle of the cell.

• 산업공학
• /
• 제15권3호
• /
• pp.230-240
• /
• 2002

Information technologies centered on the internet in the area of shipbuilding and marine engineering further incur the needs to increase the flexibility of the organization, the dispersion of work process, and the use of out sourcing, as well as the globalization of related market. In near future, electronic commerce and concurrent engineering based on CALS/EC and the Internet will be an integral part of the environment and upon these changes, ship design and construction will become a computer supported cooperative work of many dispersed and specialized groups. As the means of active response to these environmental changes, many new concepts such as digital shipbuilding, virtual shipyard, and simulation based design are appearing. In this paper, the concept and current status of digital manufacturing in general manufacturing industry will be reviewed. Then, related technologies, area of application and methods of digital manufacturing in shipbuilding and marine industries are presented. In addition, virtual assembly simulation system for shipbuilding(VASSS), a tool for crane operability and block erection simulation in virtual dock based on 3D product model, will be introduced.

• 해양환경안전학회지
• /
• 제21권2호
• /
• pp.194-199
• /
• 2015

본 연구에서는 도그 피스 설치량에 따른 용접 변형 실험을 수행하여 용접 변형 감소 효과를 정량적으로 평가하였고, 도그 피스 설치를 고려한 용접 변형 해석 방법을 제안하였다. 용접 변형 실험 결과, 도그 피스 설치량이 증가할수록 용접 변형이 감소하며 최대 74%의 변형 감소 효과가 있음을 확인하였다. 원판형 열속 모델을 사용한 열탄소성 유한요소 해석을 활용하여 도그 피스 설치를 고려한 용접 변형 해석 방법을 제안하고, 해석 결과와 실험 결과가 좋은 유사성을 보이고 있음을 확인하였다. 본 해석 방법은 현행 도그 피스 설치량에 대한 적정 여부를 평가하거나 도그 피스 사용량을 절감할 수 있는 설치 가이드를 마련하기 위한 해석적 툴로 활용될 수 있다.

• 한국분말재료학회지
• /
• 제18권4호
• /
• pp.347-358
• /
• 2011

Two different schemes were adopted to fabricate ordered macroporous structures with face centered cubic lattice of air spheres. Monodisperse polymeric latex suspension, which was synthesized by emulsifier-free emulsion polymerization, was mixed with metal oxide ceramic nanoparticles, followed by evaporation-induced self-assembly of the mixed hetero-colloidal particles. After calcination, inverse opal was generated during burning out the organic nanospheres. Inverse opals made of silica or iron oxide were fabricated according to this procedure. Other approach, which utilizes ceramic precursors instead of nanoparticles was adopted successfully to prepare ordered macroporous structure of titania with skeleton structures as well as lithium niobate inverted structures. Similarly, two different schemes were utilized to obtain disordered macroporous structures with random arrays of macropores. Disordered macroporous structure made of indium tin oxide (ITO) was obtained by fabricating colloidal glass of polystyrene microspheres with low monodispersity and subsequent infiltration of the ITO nanoparticles followed by heat treatment at high temperature for burning out the organic microspheres. Similar random structure of titania was also fabricated by mixing polystyrene building block particles with titania nanoparticles having large particle size followed by the calcinations of the samples.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.113-120
• /
• 2005

Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1:0.7. Also, a case of a cast in placed concrete wall is used in steep slopes less than 1:0.5. The cast in placed concrete walls are constructed to 30cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system is proposed. This method is constructed assembly using precast concrete panels. Therefore ability of the construction and quality of the facings can be modified than a usual soil nailing system. Also, this method can be obtained the effects that a global slope stability increase, as precast concrete panels is put on cutting face after excavating a slope.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1586-1591
• /
• 2006

조선사는 선주와의 계약에 의한 수주 생산방식으로 계약시 명시된 작업시작일, 도크작업시작일 진수일, 인도일을 지키기 위한 공정별 목표 생산완료일을 결정하게 되고, 각 공장별로 목표 생산완료일을 지키기 위한 일정계획을 수립하게 된다. 생산되는 선박은 선종, 선형에 따라 구성되는 블록의 수가 다르고 그 형태도 매우 다양하다. 그러므로 선박을 건조하기위해 제작되는 블록의 정확한 작업공기와 공수를 예측하기가 매우 어렵다. 본 논문에서는 불확실한 작업공기와 공수를 이용하여 작업장의 공간제약을 고려한 일정계획을 수립하는 문제에 대하여 기존의 공간제약 문제에 대한 연구에서 나아가 실행 단계에서의 운영프로세스를 개선하여 적용하는 연구를 수행하였다. 이번 연구의 결과로 목표 생산계획과 부서계획, 실행 실적을 과거 데이터와 비교분석 하여 개선된 운영프로세스의 효과를 검증하였다.