• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1193-1198
• /
• 2005

The pre-assembly takes a large portion of the fabrication cost of steel bridges. In order to save the fabrication cost through the improvement of the conventional pre-assembling process, this research investigates a numerical pre-assembly simulation as an alternative to current pre-assembling process. The 3D laser scanning was utilized in site and measuring data for steel box were analyzed. The productivity of pre-assembly simulation system is compared with the conventional pre-assembling system. This paper identifies feasibility on the alternative pre-assembling process and then proposes the scheme of the pre-assembly simulation system development satisfying the current pre-assembly inspection of standards.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.463-470
• /
• 2023

In this study, an electronic parts assembly training system using Leap Motion was developed in consideration of the processes actually operated in the assembly process of electronic products. Based on Leap Motion and Oculus VR equipment, the system was developed to transfer user's hand movement data in real time and convert it into hand movement in virtual space so that electronic parts assembly simulation can be performed step by step. Through this, it was confirmed that the user can obtain an experience similar to the actual electronic parts assembly work, prevent errors that may occur during the assembly process, and improve proficiency. It is expected that this thesis will provide directions for the quality improvement and development of various education and training programs for virtual reality-based manufacturing processes.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.153-180
• /
• 1994

The assemblability is determined by the structure of product and the relationship between composing parts and machining parts. In this paper, the bolt was divided into bolt-head, -shaft, -thread and -end. For higher assemblability in bolting process, it was analyzed the geometric and technological characteristics of bolts were analysed regarding pre- and in-assembly process. And this paper presents the knowledge-based expert system to assist for designer in the processor of designing bolt for easier assembly. The developed expert system for supporting bolt design assemblability which is named as BDFA SYSTEM consists of two system such as "BOLT DESIGN SYSTEM" which provide feasible assembly bolt design to designer and "EVALUATION SYSTEM" which provide assembly evaluation to alternative of bolt design.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.163-170
• /
• 2004

In order to automatically determine the sequences of block assembly operations in shipbuilding, a process planning system using case-based reasoning (CBR) is developed. A block-assembly planning problem is modeled as a constraint satisfaction problem where the precedence relations between operations are considered constraints. The process planning system generates an assembly sequence by adapting information such as solutions and constraints collected from similar cases retrieved from the case base. In order to find similar cases, the process planning system first matches the parts of the problem and the parts of each case based on their roles in the assembly, and then it matches the relations related to the parts-pairs. The part involved in more operations are considered more important. The process planning system is applied to simple examples fur verification and comparison.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.30-41
• /
• 1993

Developed in this paper is a feature based modeling system for the design of welded plat construction(WPC) which is composed of flat or bended plates represented as reference plane with a constant thickness. First, the necessity and the characteristics of the modeing system for WPC as compared with the assembly of mechanical parts are investigated. Secondly, feature library for the assembly of WPC is shown which contains several types of features like joint feature, groove feature, material feature, and precision feature. Thirdly, the assembly procedures are presented which mainly consist of both the assembly transformation and the correct assembly checking. Fourthly, weld lines of the assembled WPC are defined so that those can be used in the process planning or the manufacturing stage. Finally, a prototype by a geometric modeling software Pro/Engineer, a graphic software GL(Graphic Library), and C language on a CAD workstation IRIS.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.499-506
• /
• 2007

The tiny camera module used in a modern cellular phone requires precise assembly processes. To meet the requirement of high resolution and functionality, the number of parts used in a camera module becomes larger and larger. As the market grows rapidly, an automatic camera phone assembly process is required. However, diverse production line and short life cycle make it difficult to build an affordable assembly line. To attack this problem, a flexible and expandable lens assembly system is proposed. To save the manufacturing line set-up time, modular concept is adopted. Also, each module is designed to have intelligence to simplify the set-up process. The assembly system is built up on the standard flat-form that includes a vibration free base, air and electric supplies, and electronic controllers, etc. Furthermore, the assembly cell has the capability of handling tiny, thin, or transparent parts which are very difficult to identify without machine vision.

• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.22-35
• /
• 1999

The block assembly process takes more than half of the total shipbuilding processes. Therefore, it is very important to have a practically useful block assembly process planning system which can build plans of maximum efficiency with minimum man-hours required. However, the process plans are often not readily executable in the assembly shops due to severe imbalance of workloads. This problem arises because the process planning is done on block by block basis in current practice without paying any attention to the load distribution among the assembly shops. this paper presents the development of an automated hull block assembly process planning system which results in the most effective use of production resources and also produces plans that enable efficient time management. If the load balance of assembly shops is to be considered at the time of process planning, the task becomes complicated because of the increased computational complexity. To solve this problem, a new approach is adopted in this research in which the load balancing function and process planning function are iterated alternately providing to each other contexts for subsequent improvement. The result of case study with the data supplied from the shipyard shows that the system developed in this research is very effective and useful.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.938-941
• /
• 1995

This paper is concerned with the determination of assembly unit for hull block assembly processes for shipbuilding. In this study,genetic algorithm is adopted for assembly level allocation and assemaly unit is determined by rule-based reasoning. The criteria to detemine assembly unit is to minimize welding operation time for the block assembly.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.102-108
• /
• 2004

고성능 액체로켓엔진 개발을 위하여 터보펌프를 사용하는 재생냉각형 액체로켓엔진시스템의 배치안을 마련하였다. 엔진시스템을 구성하는 부품들에 대하여 각각의 특성을 고려하고 현실적으로 제작 및 조립이 가능하도록 3차원 디지털 모형을 제작하여 검증하였다. 1단 엔진시스템은 1축 김벌링을 하며 4개의 엔진 조립체로 클러스터링할 수 있도록 설계하였다. 2단용 엔진시스템은 2축 김벌링을 하며 1개의 엔진 조립체로 구성하였다. 1단 및 2단 엔진시스템의 조립 및 분해 공정 그리고 관련 프로그램 또한 개발하였다. 그리고 엔진시스템의 조립 및 분해 공정을 효율적으로 수행하기 위하여 여러 형태의 전용 치/공구 또한 설계하였다.

• Management Science and Financial Engineering
• /
• 제13권1호
• /
• pp.25-34
• /
• 2007

This paper is concerned with proving a conjecture that the two stage assembly system is reversible in deterministic makespan scheduling context. The reversibility means that a job sequence in the assembly system has the same makespan as that of its reverse sequence in the disassembly system which is the reversal of the assembly system. The proposed conjecture shows that the reversibility of serial flowshops can be extended to non-serial and synchronized shops.