• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.193-200
• /
• 2010

Due to the characteristic of culvert structure, the standard section of the culvert has been established and applied in field. However, this becomes a limitation in selecting a section design corresponding to various field conditions although it can improve the design and applicability of culvert structure. In order to overcome this limitation, we have developed the design and application technology of culvert structure corresponding to the field conditions that various shapes of culvert structure can be covered by assembly of precast segments. Because the structural characteristics of assembling-type waterway culvert structure, the thickness of structure and amount of reinforcing rods can vary according to the fixation or internal hinge status in the connection part of precast segments. This has a strong influence on the applicability and economic efficiency of culvert structure. Accordingly, in order to suggest a reasonable modeling technique of segment connection parts, this study has conducted the field experiment and numerical analysis. According to the results of field experiment and numerical analysis, the slab, wall and base slab with mortar splice sleeves have shown that the assembling-type of waterway culvert structure behaves like an integrated structure.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.410-415
• /
• 2009

Hexagonal barium ferrite ($BaFe_{12}O_{19}$) nano-particles have been successfully synthesised using selfassembly method. Diethyleneamine (DEA) surfactant was used to fabricate the micelle structure of Ba-DEA complex under various DEA concentrations. $BaFe_{12}O_{19}$ powders were synthesized with addition Fe ions to Ba-DEA complex and then heat treated at temperature range of 800-1000${\circ}C$. The molar ratio of Ba/DEA and heat-treatment temperature significantly affected the magnetic properties and morphology of $BaFe_{12}O_{19}$ powders. $BaFe_{12}O_{19}$ powders synthesized with Ba/DEA molar ratio of 1 and heat-treated at 1000${\circ}C$ for 1 hour showed the coercive forces (iHc) of 4.84 kOe with average crystal size of about 200 nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.189-189
• /
• 2015

Plasmonics, sensor, field effect transistors, solar cells 등 다양한 적용분야를 가지는 실리콘 구조체는 제작공정에 의해 전기적 및 광학적 특성이 달라지기 때문에 적합한 나노구조 제작방법이 요구되고 있다. 나노구조체 제작방법으로는 Photo lithography, Extreme ultraviolet lithography (EUV), Nano imprinting lithography (NIL), Block copolymer (BCP) 방식의 방법들이 연구되고 있으며, 특히 BCP는 direct self-assembly 특성을 가지고 있으며 가격적인 면에서도 큰 장점을 가진다. 하지만 BCP를 mask로 사용하여 식각공정을 진행할 경우 BCP가 버티지 못하고 변형되어 mask로서의 역할을 하지 못한다. 이러한 문제를 해결하기 위하여 본 논문에서는 BCP와 질화막을 이용한 double mask 방법을 사용하였다. 기판 위에 BCP를 self-assembly 시키고 mask로 사용하여 hole 부분으로 노출된 기판을 Ion gun을 통해 질화 시킨 후에 BCP를 제거한다. 기판 위에 hole 모양의 질화막 표면은 BCP와 다르게 etching 공정 중 변형되지 않는다. 이러한 질화막 표면을 mask로 사용하여 pillar pattern의 실리콘 나노구조체를 제작하였다. 질화막 mask로 사용되는 template은 PS와 PMMA로 구성된 BCP를 사용하였다. 140kg/mol의 polystyrene과 65kg/mol의 PMMA를 톨루엔으로 용해시키고 실리콘 표면 위에 spin coating으로 도포하였다. Spin coat 후 230도에서 40시간 동안 열처리를 진행하여 40nm의 직경을 가진 PS-b-PMMA self-assembled hole morphology를 형성하였다. 질화막 형성 및 etching을 위한 장비로 low-energy Ion beam system을 사용하였다. Reactive Ion beam은 ICP와 3-grid system으로 구성된 Ion gun으로부터 형성된다. Ion gun에 13.56 MHz의 frequency를 갖는 200W 전력을 인가하였다. Plasma로부터 나오는 Ion은 $2{\Phi}$의 직경의 hole을 가지는 3-grid hole로 추출된다. 10~70 voltage 범위의 전위를 plasma source 바로 아래의 1st gird에 인가하고, 플럭스 조절을 위해 -150V의 전위를 2nd grid에 인가한다. 그리고 3rd grid는 접지를 시켰다. chamber내의 질화 및 식각가스 공급은 2mTorr로 유지시켰다. 그리고 기판의 온도는 냉각칠러를 이용하여 -20도로 냉각을 진행하였다. 이와 같은 공정 결과로 100 nm 이상의 높이를 갖는 40 nm직경의 균일한 Silicon pillar pattern을 형성 할 수 있었다.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.161-167
• /
• 2010

CEU(Camera Electronic Unit) loaded in optical satellite for a high resolution image acquisition is composited with CC(Camera Controlloer), FPA(Focal Plane Assembly) and CEUP(CEU Power supply). EMC test and analysis results are explained in this paper. CE, CS, RE and RS test is performed in the 1st EMC test, RE, RS test which is not complied and influence considerably after shielding structure is performed in the 2nd EMC test. An effect due to the noise of CEU in the GPS/S-band receiving band is analyzed based on 2nd EMC test results. Margin more than 6dB is guaranteed when CEU is shielded.

• BMB Reports
• /
• v.33 no.5
• /
• pp.370-378
• /
• 2000

Incubation of purified laminin1-nidogen1 complexes with $[{\gamma}-^{32}P]-ATP$ in the presence of the catalytic subunit of the protein kinase A (cAMP-dependent protein kinase) resulted in the phosphorylation of the alpha chain of laminin-1 and of the nidogen-1 molecule. Aminoacid electrophoresis indicated that phosphate was incorporated on serine residues. The phosphorylation effect of laminin-1 on the process of self assembly was studied by turbidometry. In these experiments, the phosphorylated laminin-1 showed a reduced maximal aggregation capacity in comparison to the non-phosphorylated molecule. Examination of the laminin-1 network under the electron microscope showed that the phosphorylated sample formed mainly linear extended oligomers, in contrast to controls that formed large and dense multimeric aggregates. Heparin binding on phosphorylated laminin-1 in comparison to controls was also tested using solid-phase binding assays. The results indicated an enhanced heparin binding to the phosphorylated protein. The results of this study indicate that laminin1-nidogen1 is a substrate for protein kinase A in vitro. This phosphorylation had an obvious influence on the lamininl-nidogen1 network formation and the heparin binding capacity of this molecule. However, further studies are needed to investigate whether or not this phenomenon could play a role in the formation of the structure of basement membranes in vivo.

• BMB Reports
• /
• v.48 no.12
• /
• pp.685-690
• /
• 2015

The eukaryotic genome is packed into chromatin, which is important for the genomic integrity and gene regulation. Chromatin structures are maintained through assembly and disassembly of nucleosomes catalyzed by histone chaperones. Asf1 (anti-silencing function 1) is a highly conserved histone chaperone that mediates histone transfer on/off DNA and promotes histone H3 lysine 56 acetylation at globular core domain of histone H3. To elucidate the role of Asf1 in the modulation of chromatin structure, we screened and identified small molecules that inhibit Asf1 and H3K56 acetylation without affecting other histone modifications. These pyrimidine-2,4,6-trione derivative molecules inhibited the nucleosome assembly mediated by Asf1 in vitro, and reduced the H3K56 acetylation in HeLa cells. Furthermore, production of HSV viral particles was reduced by these compounds. As Asf1 is implicated in genome integrity, cell proliferation, and cancer, current Asf1 inhibitor molecules may offer an opportunity for the therapeutic development for treatment of diseases.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.421-431
• /
• 2016

Novel membrane technologies that harness ordered nanostructures have recently received much attention because they allow for high permeability due to their reduced flow resistance while also maintaining high selectivity due to their isoporous characteristics. In particular, the opaline structure (made from the self-assembly of colloidal particles) and its inverted form (inverse-opal) have shown strong potential for membrane applications on account of several advantages in processing and the resulting membrane properties. These include controllability over the pore size and surface functional moieties, which enable a wide range of applications ranging from size-exclusive separation to catalytically-reactive membranes. Furthermore, when combined with multiscale architecturing strategies, inverse-opal-structured membranes can be designed to have specific pores or channel structures. These materials are anticipated to be utilized for next-generation, high-performance, and high-value-added functional membranes. In this review article, various types of inverse-opal-structured membranes are reviewed and their functionalization through hierarchical structuring will be comprehensively investigated and discussed.

• The Korean Journal of Zoology
• /
• v.28 no.4
• /
• pp.227-236
• /
• 1985

In an attempt to make a scrutiny into a mechanism for the formation of quaternary structure of LDH isozymes, male mice were intraperitoneally exposed to a wide range of tetrodotoxin concentration and the changes in relative percentage of the five isozymes were monitored by electrophoresis and subsequent densitometry. The observations that a conspicuous increase of the $H_4$ isozyme was demonstrated in nearly all brain tissues, that the $M_4$ isozyme of skeletal muscle tissue was slightly increased while the $M_3H$ and $M_2H_2$ isozymes were decreased, that the M/H ratio was strikingly reduced in heart tissue and that assembly of $H_4$ isozyme was revealed in liver tissue although its rate was extremely low suggest that new intracellular ionic environment established by compulsory change in Donnan equilibrium could alter the LDH isozyme distribution. The reduction of assembly of $M_3H$ isozyme found in mouse tissues exposed to tetrodotoxin also seems to suggest that the subunit combination of 3M+H is very unfavorable in an intracellular environment deviated from its accustomed one. It was reaffirmed that there might occur TTX-insensitive sodium channels in plasma membrane.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.332-341
• /
• 2013

H-shaped amphiphilic pentablock copolymers $(PSt)_2-b-PCL-b-PEO-b-PCL-b-(PSt)_2$ was synthesized via chemoenzymatic method by combining enzyme-catalyzed ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (${\varepsilon}$-CL) and atom transfer radical polymerization (ATRP) of styrene. By this process, we obtained copolymers with controlled molecular weight and low polydispersity. The structure and composition of the obtained copolymers were characterized by nuclear magnetic resonance (NMR), gel permeation chromatography (GPC) and infrared spectroscopy analysis (IR). The crystallization behavior of the copolymers was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The crystallization behavior of the H-shaped block copolymers demonstrated a PCL dominate crystallization. The self-assembly behavior of the copolymers was investigated in aqueous media. The hydrodynamic diameters of the copolymer micelles in aqueous solution were measured by dynamic light scattering (DLS). The morphology of the copolymer micelles was observed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The hydrodynamic diameters of spherical micelles declined gradually with the increase of the hydrophobic chain lengths of the copolymers. The critical micelle concentration (CMC) values were determined from fluorescence emission, and it was found that the CMCs decreased with an increase of PSt hydrophobic block lengths.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.1
• /
• pp.113-120
• /
• 2015

In recent years, the population composition of rural area is changing due to the decreasing population growth of the aged with disability and people returning to farming. Since 1970's the rural community facilities have been spreaded out across most rural villages. Although the rural community facilities are the most widely used facilities, the existing facilities are need to be new built or remodeled according to demographic changes, usage of facilities, and environmental condition. Given this reality, the rural community facilities such as village assembly hall and nursing home for senior citizen are not only used for daily life place but also used like co-residence having meals and sleeping together. Therefore the rural community facilities have the potential to become welfare service space for rural elderly people. This research focuses on the current situation of universal design applied community facilities. According to the research, most of the village community facilities were built in the 1990s and 82% of the buildings were more than 15 years old. Furthermore, 45% of the village community facilities more than 15 years old most have a ground floor in masonry structure. The area of the building is 65% less than $100m^2$. The width of the access entrance, the height of the sink, gas safety valve and so forth were relatively well designed. However, the handrail of the entrance, space in front of the toilet bowl, the height difference between the entrance and floor, the installation of the width of the ramp and stair handrail was relatively incomplete. Village community facilities to be built in the future should be universal design fundamentally.