• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.328-334
• /
• 1999

Based on the Euler beam theory and the elastic strain energy method, the elastic stiffness formula of the holddown spring assembly consisting of several leaves was previously derived. Even though the previous formula was known to be useful to estimate the elastic stiffness of the holddown spring assembly, recently it was reported that the elastic stiffness from the previous formula deviated greatly from the test results as the number of leaves was increased. The objective of this study is to extend the previous formula in order to resolve such an increasing deviation when increasing the number of leaves. Additionally, considering the friction forces acting on the interfaces between the leaves, we obtained an extended elastic stiffness formula. The characteristic test and the elastic stiffness analysis on the various kinds of specimens of the holddown spring assembly have been carried out; the validity of the extended formula has been verified by the comparison of their results. As a result of comparisons, it is found that the extended formula is able to evaluate the elastic stiffness of the holddown spring assembly within the maximum error range of + 12%, irrespective of the number of the leaves.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.28-33
• /
• 1996

A transport theory code CRX-Hex based on characteristic methods with a general geometric tracking routine is developed for the heterogeneous hexagonal geometry. With the general geometric tracking routine, the formulation of the characteristic method is not changed. To test the code, it was applied to two benchmark problems which consist of complex meshes and compared with other codes (HELIOS, TWOHEX).

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.230.2-230
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.335.2-335
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.311.2-311.2
• /
• 2003

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.162-165
• /
• 2004

A layout of regenerative liquid rocket engine using turbo pump has been designed for development of high performance liquid rocket engine. each components of engine system was placed by considering assembly and characteristic. first stage engine system is controled by one plane of axis gimballing and composed of four engine assembly to cluster with launch vehicle. second stage engine system is controled by two plane of axis gimballing and composed of one engine assembly. assembly and disassembly processes and required program have been developed. various shape of instruments were also developed for carrying out assembly and disassembly process efficiently

• Nuclear Engineering and Technology
• /
• v.38 no.4
• /
• pp.375-382
• /
• 2006

Characterization tests (load vs. displacement curve) are conducted for the springs of Zirconium alloy spacer grids for an advanced LWR fuel assembly. Twofold testing is employed: strap-based and assembly-based tests. The assembly-based test satisfies the in situ boundary conditions of the spring within the grid assembly. The aim of the characterization test via the aforementioned two methods is to establish an appropriate assembly-based test method that fulfills the actual boundary conditions. A characterization test under the spacer grid assembly boundary condition is also conducted to investigate the actual behavior of the spring in the core. The stiffness of the characteristic curve is smaller than that of the strap-wised boundary condition. This phenomenon may cause the strap slit condition. A spacer grid consists of horizontal and vertical straps. The strap slit positions are differentiated from each other. They affords examination of the variation of the external load distribution in the grid spring. Localized legions of high stress and their values are analyzed, as they may be affected by the spring shape. Through a comparison of the results of the test and FE analysis, it is concluded that the present assembly-based analysis model and procedure are reasonably well conducted and can be used for spring characterization in the core. Guidelines for improving the mechanical integrity of the spring are also discussed.

• Nuclear Engineering and Technology
• /
• v.28 no.6
• /
• pp.583-593
• /
• 1996

An elastic stiffness formula of a leaf type holddown spring(HDS) assembly with a uniformly tapered width from $w_0$ to $w_14$ over the length, has been analytically derived based on Euler beam theory and Castigliano's theorem. Elastic stiffnesses of the tapered-width leaf type HDSs(TW-HDSs) designed in the same dimensional design spaces as the KOFA HDSs have been evaluated from the derived formula, in addition, a parametric study on the elastic stiffness of the TW-HDSs has been carried out. Analysis results show that, as the effects of axial and shear force on the elastic stiffness of He TW-HDSs have been 0.15~0.21% of the elastic stiffness, most of the elastic stiffness is attributed to the bending moment, and that elastic stiffnesses of the TW-HDSs have been about 32~33% higher than those of the KOFA HDSs. It is found that the number of leaves composing a HDS assembly could be lessened by one under the conditions that the TW-HDSs have been adopted in KOFA.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.1
• /
• pp.39-48
• /
• 1999

An economic procedure of selective assembly is proposed when a product is composed of two mating components. The major qualify characteristic of the product is the clearance between the two components. The components are divided into several classes prior to assembly. The component characteristics are assumed to be independently and normally distributed with equal variance. The procedure is designed so that the proportions of both components in their corresponding classes are the same. A cost model is developed based on a quadratic loss function and methods of obtaining the optimal class limits as well as the optimal number of classes are provided. Formulas for obtaining the proportion of rejection and the unavailability of mating components are also provided. The proposed model is compared with the equal width and the equal area partitioning methods using a numerical example.

• Tribology and Lubricants
• /
• v.17 no.2
• /
• pp.116-123
• /
• 2001

A theoretical analysis has been undertaken to show the influence of bearing geometry on the steady state characteristics of air lubricated spherical tilting pad bearings. The geometry variations considered are the number of pads, the eccentricity ratio, the direction of load, and the preloading. Dynamic characteristic equations are derived with pad assembly method.